Research graph
References from Recent advances in silver-matrix composite electrical contact materials: microstructural design, properties enhancement, and rare-earth modification. Local targets link to admitted publications; unresolved targets remain external evidence.
Kinetic study of oxidation of ag-Sn-Zn solid solution powders via hot Mechanochemical processing
10.3390/ma17205115 · 2024 · External reference
Investigation of graphene as a material for electrical contacts in the application of microrelays using finite element modeling
10.1088/2053-1591/ab3085 · 2019 · External reference
Research on the influence of different oxide particles on properties of AgCdO contact material
2021 · External reference
Electrical contacts with 2D materials: current developments and future prospects
10.1002/smll.202206550 · 2023 · External reference
Arc erosion resistance of cu/Ti2SnC electrical contact materials under various component ratios and atmosphere conditions
10.1016/j.ceramint.2025.06.384 · 2025 · External reference
Enhanced arc erosion resistance of CNTs reinforced CuCr electrical contact materials fabricated by ultrasonic spray pyrolysis
10.1016/j.jallcom.2025.181800 · 2025 · External reference
Arc erosion properties of CuCr/Ti3C2 under elevated voltages and repetitive arc breakdowns
10.1016/j.matchar.2024.114601 · 2025 · External reference
Recent advances in processing, and mechanical, thermal and electrical properties of cu-SiC metal matrix composites prepared by powder metallurgy
10.1016/j.pmatsci.2023.101191 · 2023 · External reference
Lubrication performance of graphene in the sliding electrical contact interface
10.1007/s40544-024-0910-7 · 2024 · External reference
Comparative study of the microstructure and arc erosion resistance of ag/Ti2AlX (X = C, N) electrical contact materials
10.1016/j.jallcom.2023.170870 · 2023 · External reference
The influence of chemical and phase composition on mechanical, tribological and electrical properties of silver-aluminum alloys
10.1016/j.triboint.2017.11.026 · 2018 · External reference
Novel copper-impregnated carbon strip for sliding contact materials
10.1016/j.jallcom.2017.11.311 · 2018 · External reference
State of the art and prospects in sliver- and copper-matrix composite electrical contact materials
2023 · External reference
Improving dispersion of SnO2 nanoparticles in ag-SnO2 electrical contact materials using template method
10.1016/j.jallcom.2013.03.094 · 2013 · External reference
Cotton-templated synthesis of (MgCoNiCuZn)O entropy-stabilised tubes and their application in silver-based electrical contact materials
10.1016/j.ceramint.2026.02.117 · 2026 · External reference
Effect of in-situ phase transition of (MgCoNiCuZn)O high-entropy oxides on microstructure and performance of ag-based electrical contact materials
10.1016/j.apsusc.2023.157479 · 2023 · External reference
Laser direct fabrication graphene on silver-based contact as high-end electrical product
10.1007/s10853-023-08509-0 · 2023 · External reference
Electrical properties of in situ synthesized ag-graphene/Ni composites
10.3390/ma15186423 · 2022 · External reference
Graphene-enhanced silver composites for electrical contacts: a review
10.1007/s10853-024-09473-z · 2024 · External reference
Arc erosion behavior of ag/Ni electrical contact materials
10.1016/j.matdes.2015.06.142 · 2015 · External reference
Novel processing of ag-WC electrical contact materials using spark plasma sintering
10.1016/j.matdes.2017.02.070 · 2017 · External reference
Anisotropic properties of ag/Ti3AlC2 electrical contact materials prepared by equal channel angular pressing
10.1016/j.jallcom.2019.01.083 · 2019 · External reference
Arc erosion behavior and mechanism of ag/Ti3SiC2 cathodes in different atmospheres
10.1016/j.ceramint.2020.09.074 · 2021 · External reference
Thermal CVD growth of graphene on copper particles targeting tungsten-copper composites with superior wear and arc ablation resistance properties
10.1016/j.diamond.2020.107765 · 2020 · External reference
A new TiBN conductive ceramic powder and its application in copper-based electrical contact materials
10.1016/j.ceramint.2023.05.163 · 2023 · External reference
Simultaneously enhancing erosion and compression resistance: designing AlCoCrFeNi high-entropy alloy strengthened ag-based contacts
10.1007/s12598-024-02750-5 · 2024 · External reference
The vacuum breakdown properties and arc erosion behaviors of CuTiW alloys
10.1016/j.engfailanal.2020.104865 · 2020 · External reference
Excellent anti-arc erosion performance and corresponding mechanisms of a nickel-belt-reinforced silver-based electrical contact material
10.1016/j.jallcom.2019.02.085 · 2019 · External reference
Three-dimensional network graphene-reinforced cu-0.12 wt% ag matrix composites for superior electrical contact performance
10.1016/j.jallcom.2025.182923 · 2025 · External reference
Porous Y2O3 fiber-reinforced silver composite exhibiting enhanced mechanical and electrical properties
10.1016/j.ceramint.2018.10.079 · 2019 · External reference
Quasi-continuous network structure greatly improved the anti-arc-Erosion capability of ag/Y2O3 electrical contacts
10.3390/ma15072450 · 2022 · External reference
Wear-resistant ag-MAX phase 3D interpenetrating-phase composites: processing, structure, and properties
10.1007/s12274-023-6015-1 · 2024 · External reference
Phase-transforming ag-NiTi 3-D interpenetrating-phase composite with high recoverable strain, strength and electrical conductivity
2022 · External reference
Ternary rare earth (R) alloys occurring in the RAg2-RGa2 section
10.1016/s0925-8388(98)00785-3 · 1998 · External reference
Electric resistivities and solid solubilities of some rare-earth metals in silver
10.1016/0038-1098(66)90328-0 · 1966 · External reference
Understanding the valency of rare earths from first-principles theory
10.1038/21595 · 1999 · External reference
First-principles and experimental investigations on physical properties and arc erosion behavior of metal-doped ag-SnO2 electrical contact materials
10.1016/j.ceramint.2023.05.154 · 2023 · External reference
High-speed imaging observation on molten bridges of AgNi10 electrical contact material
10.1007/s12598-017-0911-z · 2023 · External reference
Finite element simulations of temperature distribution and of densification of a titanium powder during metal laser sintering
2017 · External reference
Theoretical model and finite element simulation on the effective thermal conductivity of particulate composite materials
10.1016/j.compositesb.2016.10.067 · 2017 · External reference
Machine learning for molecular and materials science
10.1038/s41586-018-0337-2 · 2018 · External reference
Machine learning in energy storage materials
2022 · External reference
Unveiling the origin of the strengthening mechanism in a novel precious metal multi-principal elements alloy
2025 · External reference
Effect of grain size reduction and geometrical confinement in fine grained copper: potential applications as a material for reversible electrical contacts
10.1002/adem.200900346 · 2010 · External reference
Fabrication and arc erosion behaviors of AgTiB2 contact materials
10.1016/j.powtec.2014.01.068 · 2014 · External reference
Nanostructured Al/Ni energetic composites: processing, reaction properties and activation energy
10.1016/j.jmrt.2022.06.144 · 2022 · External reference
Nanostructured phosphorus doped silicon/graphite composite as anode for high-performance Lithium-ion batteries
10.1021/acsami.7b04361 · 2017 · External reference
The ball to powder ratio (BPR) dependent morphology and microstructure of tungsten powder refined by ball milling
10.1016/j.powtec.2018.07.094 · 2018 · External reference
Dry ball milling and wet ball milling for fabricating copper-yttria composites
10.1007/s12598-018-1086-y · 2018 · External reference
Determination of milling parameters to obtain mechanosynthesized ZnFe2O4
10.1016/j.jallcom.2006.12.117 · 2008 · External reference
Recent progress in low-dimensional nanomaterials filled multifunctional metal matrix nanocomposites
10.1016/j.pmatsci.2022.101034 · 2023 · External reference
Chemical vapour deposition
10.1038/s43586-020-00005-y · 2021 · External reference
Chemical vapor deposition of layered two-dimensional MoSi2N4 materials
10.1126/science.abb7023 · 2020 · External reference
Acetone sensing applications of ag modified TiO2 porous nanoparticles synthesized via facile hydrothermal method
10.1016/j.apsusc.2020.147383 · 2020 · External reference
Synthesis of some transition metal (M: 25Mn, 27Co, 28Ni, 29Cu, 30Zn, 47Ag, 48Cd) sulfide nanostructures by hydrothermal method
10.1016/j.cis.2017.06.007 · 2017 · External reference
Iron series metal-organic frameworks and their composite nanomaterials: controllable synthesis and clean energy applications
10.1016/j.nanoen.2024.109559 · 2024 · External reference
A highly alkaline-stable metal oxide@metal-organic framework composite for high-performance electrochemical energy storage
10.1093/nsr/nwz137 · 2020 · External reference
A one-step graphene induction strategy enables in-situ controllable growth of silver nanowires for electromagnetic interference shielding
10.1016/j.carbon.2021.07.067 · 2021 · External reference
In situ synthesis of metal sulfide nanoparticles based on 2D metal-organic framework Nanosheets
10.1002/smll.201600976 · 2016 · External reference
In situ synthesis of metal nanoparticle embedded hybrid soft nanomaterials
10.1021/acs.accounts.6b00201 · 2016 · External reference
The effects of citric acid on the synthesis and performance of silver-tin oxide electrical contact materials
10.1016/j.jallcom.2013.10.222 · 2014 · External reference
Gigantic effect due to phase transition on thermoelectric properties of ionic sol-gel materials
10.1002/adfm.202208286 · 2022 · External reference
Sol-gel based materials for biomedical applications
10.1016/j.pmatsci.2015.12.001 · 2016 · External reference
Chemical routes in the synthesis of nanomaterials using the sol-gel process
10.1021/ar7000149 · 2007 · External reference
Microwave-assisted synthesis and investigation of SnO2 nanoparticles
10.1016/j.matlet.2009.01.032 · 2009 · External reference
Surfactant-free microwave hydrothermal synthesis of SnO2 nanosheets as an anode material for lithium battery applications
10.1016/j.ceramint.2017.09.159 · 2018 · External reference
Synthesis and characterization of Y2O3/Fe2O3/TiO2 nanoparticles by sol-gel method
10.1016/j.apcatb.2004.11.022 · 2005 · External reference
Influence of copper doping on structural, morphological, optical, and vibrational properties of ZnO nanoparticles synthesized by sol gel method
2020 · External reference
Microwave assisted synthesis of nickel oxide nanoparticles at different pH via sol gel method: experimental and first-principles investigations
10.1016/j.inoche.2024.112415 · 2024 · External reference
Properties and microstructure of oxide dispersion strengthened tungsten alloy prepared by liquid-phase method: a review
10.1007/s42864-022-00180-3 · 2023 · External reference
Use of a pressurized water treatment to prevent cracking of internal gelation sol-gel microspheres
10.1007/s10971-020-05230-1 · 2020 · External reference
Synthesis of inorganic membrane by sol-gel process
10.1016/j.desal.2007.01.187 · 2008 · External reference
Novel green manufacture of metallic aluminum coatings on carbon steel by sol-gel method
10.1039/d0ra08175b · 2021 · External reference
Influence of different inhibitors on the conductive and corrosion resistance performance of sol-gel coatings on 6063 aluminum alloy
10.1016/j.apsusc.2025.163696 · 2025 · External reference
Sol-gel processing of metal-organic frameworks
10.1021/acs.chemmater.6b03934 · 2017 · External reference
Effect of sintering temperature on microstructures and properties of ag-SnO2 electrical contact alloys prepared via stirred ball milling and hot-pressing sintering
10.1016/j.ceramint.2026.06.177 · 2026 · External reference
Effects of coating process on the characteristics of ag-SnO2 contact materials
10.1016/j.matchemphys.2005.09.067 · 2006 · External reference
Electro-tribological properties of diamond like carbon coatings
10.1007/s40544-019-0286-2 · 2020 · External reference
Powder metallurgy preparation of new silver-tin oxide electrical contacts from electrolessly plated composite powders
10.1016/0921-5107(91)90023-o · 1991 · External reference
Interface structure of ag/SnO2 nanocomposite fabricated by reactive synthesis
10.1016/s1005-0302(10)60008-4 · 2010 · External reference
Optimized strength and conductivity of multi-scale copper alloy/metallic glass composites tuned by a one-step spark plasma sintering (SPS) process
10.1016/j.jmst.2022.04.024 · 2022 · External reference
Ultra-fine W-Y2O3 composite powders prepared by an improved chemical co-precipitation method and its interface structure after spark plasma sintering
10.1007/s42864-019-00021-w · 2019 · External reference
Concentration-gradient driven atom diffusion to synthesize high-loaded and sub-5 nm PtCo intermetallic compound for fuel cells
10.1016/j.esci.2025.100453 · 2026 · External reference
Experimental and molecular dynamics multiscale study on sintering and interfacial reaction of Fe2O3/CaO particle system
10.1016/j.cej.2024.153911 · 2024 · External reference
Sintering dense nanocrystalline ceramics without final-stage grain growth
10.1038/35004548 · 2000 · External reference
A novel void healing mechanism in cold sprayed nanostructured coating via grain boundary migration under low-temperature sintering
2024 · External reference
Progress in aluminium and magnesium matrix composites obtained by spark plasma, microwave and induction sintering
10.1080/09506608.2022.2077029 · 2023 · External reference
Fabrication of high thermal conductivity and wear resistance graphite/copper composites by microwave hot press sintering
10.1016/j.triboint.2024.109522 · 2024 · External reference
Rapid densification of additive manufactured magnesium alloys via microwave sintering
2021 · External reference
Effects of heating rate on interfacial evolution and densification behavior of high-entropy alloy-reinforced Al matrix composites during microwave sintering
10.1016/j.compositesa.2026.110015 · 2026 · External reference
Effects of silver powder particle size on the microstructure and properties of ag-Yb2O3 electrical contact materials prepared by spark plasma sintering
10.1007/s12598-010-0131-2 · 2010 · External reference
Fabrication and characterization of W/cu/Ni-based high specific gravity alloy with Zr and Ti combined addition
10.1016/j.ijrmhm.2021.105674 · 2021 · External reference
Tailoring electrical contact properties of cu-5wt%W composites through HfC and TaC nanoparticle addition
10.1016/j.matchar.2025.115128 · 2025 · External reference
Sol-gel ionics
10.1016/0167-2738(92)90234-g · 1992 · External reference
The chemistry of the sol-gel process
10.1016/0167-2738(89)90338-x · 1989 · External reference
Chemical kinetics at solid/solid interfaces
10.1016/s0167-2738(02)00270-9 · 2002 · External reference
Chemical kinetics at solid-solid interfaces
10.1351/pac200072112137 · 2000 · External reference
The effect of size-dependent nanoparticle energetics on catalyst sintering
10.1126/science.1075094 · 2002 · External reference
Dynamics of wetting in reactive metal/ ceramic systems
1998 · External reference
Enhanced wetting of dual-phase metallic solids by liquid metals: a new effect of interfacial reaction
10.1016/j.actamat.2013.03.039 · 2013 · External reference
Microstructural and mechanical characteristics of in situ metal matrix composites
10.1016/s0927-796x(00)00024-3 · 2000 · External reference
Hydrolysis of tin(II) neo-pentoxide: syntheses, characterization, and X-ray structures of [Sn(ONep)2]∞, Sn5(μ3-O)2(μ-ONep)6, and Sn6(μ3-O)4(μ-ONep)4 where ONep = OCH2CMe3
10.1021/ic011247f · 2002 · External reference
The sol-gel process
10.1021/cr00099a003 · 1990 · External reference
Strong metal-support interactions: occurrence among the binary oxides of groups IIA-VB
10.1016/0021-9517(78)90182-3 · 1978 · External reference
Synchrotron techniques for in situ catalytic studies: capabilities, challenges, and opportunities
10.1021/cs3004006 · 2012 · External reference
Effect of hot isostatic pressing (HIP) on microstructure and mechanical properties of Ti6Al4V alloy fabricated by cold spray additive manufacturing
2019 · External reference
Phase evolution of Yttria-stabilized zirconia during hybrid microwave sintering
10.1007/s13369-024-09308-8 · 2025 · External reference
Additive manufacturing of carbon steel with site-specific compositions and properties using binder jetting and spark plasma sintering
2024 · External reference
Simulation on liquid phase sintering of CeO2-CoO ceramic by diffusional Monte Carlo Potts model
2024 · External reference
Dendrite-suppressed garnet-amorphous glass biphasic electrolyte via in-situ liquid phase sintering for high-performance solid-state batteries
2025 · External reference
Wetting and solidification of silver alloys in the presence of tungsten carbide
10.1016/j.actamat.2017.11.012 · 2018 · External reference
Interfacial engineering of solution-processed Bi2Te3-based thermoelectric nanocomposites via graphene addition and liquid-phase-sintering process
10.1016/j.cej.2022.135882 · 2022 · External reference
Submicron coating strategy overcomes densification bottlenecks in liquid-phase sintering of immiscible WCu bimetallic systems
10.1016/j.ijrmhm.2025.107401 · 2025 · External reference
Effect of WC particle size and ag volume fraction on electrical contact resistance and thermal conductivity of ag-WC contact materials
10.1016/j.matdes.2015.07.006 · 2015 · External reference
Improved electrical contact properties of MoS2-graphene lateral Heterostructure
10.1002/adfm.201807550 · 2019 · External reference
Arc erosion behavior of a nanocomposite W-cu electrical contact material
10.1016/s1001-0521(06)60011-9 · 2006 · External reference
Arc erosion resistance of Al2O3-cu/35Mo composites reinforced by trace graphene oxide
10.1016/j.jmrt.2024.06.046 · 2024 · External reference
Arc erosion behavior of the Al2O3-cu/(W, Cr) electrical contacts
10.1016/j.compositesb.2018.10.040 · 2019 · External reference
Elaborating the cu-network structured of the W-cu composites by sintering intermittently electroplated core-shell powders
10.1016/j.jallcom.2018.08.158 · 2019 · External reference
The effect of dispersed Ni particles on the microstructure and performance evolution of 3D Ni network reinforced ag-based contact materials during hot extrusion
10.1016/j.msea.2025.148871 · 2025 · External reference
A step-by-step method of rule-of-mixture of fiber- and particle-reinforced composite materials
10.1016/s0263-8223(98)00033-6 · 1997 · External reference
Influence of grain refinement on the corrosion behavior of metallic materials: a review
10.1007/s12613-021-2308-0 · 2021 · External reference
A continuum model for dislocation pile-up problems
10.1016/j.actamat.2017.01.057 · 2017 · External reference
Bionic multilevel composite structures Design in ag-CuO contacts for synergistically enhancing Erosion and impact resistance
10.1021/acsami.5c11098 · 2025 · External reference
Enhancing the cavitation erosion resistance of additive manufactured Al-Si alloys with strong connective Si networks
10.1016/j.jmst.2025.02.006 · 2025 · External reference
Additively manufactured TiAl-based composite with a multi-stage network structure synergically enabling strength and microstructural stability
10.1016/j.compositesb.2025.112460 · 2025 · External reference
In situ synthesized 3D network structure TC4 metal matrix composites reinforced by the graphene via using laser additive manufacturing
10.1016/j.jmrt.2025.10.100 · 2025 · External reference
Microstructure and properties of ag/SnO2 functional material manufactured by selective laser melting, Nano
2019 · External reference
Electrohydrodynamic redox printing vs magnetron sputtering: enhancing hardness of nanoporous silver with twinning and structural order
10.1016/j.matdes.2025.113909 · 2025 · External reference
Tailoring absorptivity of highly reflective ag powders by pulsed-direct current magnetron sputtering for additive manufacturing processes
10.1016/j.jmatprotec.2023.117985 · 2023 · External reference
Premature failure of an additively manufactured material
10.1038/s41427-020-0212-0 · 2020 · External reference
Arc erosion behaviour of in-situ TiB2/cu composites with a three-dimensional network structure
10.1088/2053-1591/ac6091 · 2022 · External reference
Nanoscale mapping of carrier Mobilities in the ballistic transports of carbon nanotube networks
10.1021/acsnano.2c10715 · 2022 · External reference
Electrical contact resistance of coated spherical contacts
10.1109/ted.2016.2612545 · 2016 · External reference
Morphology and electrical contact properties of electrical connection materials in corrosive atmosphere
10.1007/s12598-013-0032-2 · 2013 · External reference
Experimental study of influence factors on thermal contact resistance with theoretical model correlation
10.1016/j.icheatmasstransfer.2026.110734 · 2026 · External reference
Atomic insight in fusion mechanism of heterogeneous and homogeneous sintering: cu and ag nanoparticles
10.1016/j.rinp.2024.107411 · 2024 · External reference
Sintering of multiple cu-ag core-shell nanoparticles and properties of nanoparticle-sintered structures
10.1039/c7ra02611k · 2017 · External reference
Measurement-based optimization and analysis of α-IGZO/ag/α-IGZO transparent conducting electrodes fabricated using DC magnetron sputter deposition
10.1016/j.ceramint.2018.06.277 · 2018 · External reference
Effects of AgSnSe2 addition on the thermoelectric properties of Bi0.5Sb1.5Te3
10.1016/j.jallcom.2023.170399 · 2023 · External reference
Understanding the ferroelectric polymer-metal contact electrification for triboelectric Nanogenerator from molecular and electronic structure
2022 · External reference
Formation of an electric dipole at metal-semiconductor interfaces
10.1103/physrevb.64.205310 · 2001 · External reference
The structure and properties of metal-semiconductor interfaces
10.1016/0167-5729(82)90001-2 · 1982 · External reference
Band offsets of wide-band-gap oxides and implications for future electronic devices
2000 · External reference
Band offsets, Schottky barrier heights, and their effects on electronic devices
10.1116/1.4818426 · 2013 · External reference
Interface chemical welding by nanoparticles endow ceramic aerogels with broad-temperature microwave absorption and thermal insulation
2026 · External reference
Preparation and microstructure characterization of a nano-sized Ti4+-doped AgSnO2 electrical contact material
10.1007/s12598-009-0005-7 · 2009 · External reference
Simulation and experimental study on the properties of Y- and Ce-doped AgSnO2 electrical contact materials
10.5772/intechopen.1004978 · 2025 · External reference
Effect of Y2O3 on electric performance of ag-SnO2-Y2O3 composite electrical contact materials
2025 · External reference
Volumetric contact theory to electrical contact between random rough surfaces
10.1016/j.triboint.2021.107007 · 2021 · External reference
Improving mechanical and electrical contact performance of silver based electrical contact material reinforced by flower spherical zinc oxide loaded with silver nanoparticles
2024 · External reference
Enhanced strength and conductivity of CuCrZr/CuAlCrFeNi2.5 multi-principal element alloy composite via interface and configuration engineering
10.1016/j.jmrt.2025.04.288 · 2025 · External reference
Metallic electrical contact materials: DFT calculations, wetting mechanism and arc resistance
2024 · External reference
Influence of WO3 addition on the material transfer behavior of the AgTiB2 contact material
10.1016/j.matdes.2017.02.059 · 2017 · External reference
Electrical characteristics of AgTiB2Ni and AgC contact materials under different pairing modes
10.1016/j.jallcom.2025.180537 · 2025 · External reference
Arc erosion and material transfer behavior of ag-6TiB2 contact materials with different CuO additions
2026 · External reference
Revealing the crucial role of skeleton restructuring on erosion dispersion of ag-CuO contact materials
10.1016/j.apsusc.2022.155676 · 2023 · External reference
Designed bimetallic layer-encapsulated tungsten powders for reinforcing tungsten-silver matrix composite electrical contact materials
10.1016/j.jallcom.2024.176470 · 2024 · External reference
Burning voltage of arcs in high vacuum
10.1038/181475a0 · 1958 · External reference
A work-function-tunable 2D alloy for electrical contacts
10.1038/s41928-023-01063-2 · 2023 · External reference
Wetting behavior and interfacial characteristic of Sn-ag-cu solder alloy on cu substrate
10.1007/s11434-010-0056-z · 2010 · External reference
Melt viscosity of light alloys: Progress and challenges
10.1016/j.jmst.2023.11.002 · 2024 · External reference
Laser-arc hybrid additive manufactured AlCu alloy for T-shaped structure: microstructure evaluation and molten pool behavior
10.1016/j.jmapro.2022.04.042 · 2022 · External reference
Interfacial engineering for boosting electrical contact performance in perovskite-reinforced silver composites
10.1016/j.jallcom.2025.184530 · 2025 · External reference
Electrical characteristics for novel titanium oxide and carbide enhanced ag-based contact materials: experimental and simulation
10.1016/j.apsusc.2025.165170 · 2026 · External reference
Arc erosion dynamic of island- and skeleton-restricted microstructure evolution modes in ag-CuO contact materials
10.1016/j.jallcom.2020.154412 · 2020 · External reference
Arc erosion resistance of TiB2/cu composites under different voltages
10.1016/j.jmrt.2026.04.068 · 2026 · External reference
Impact of convection-diffusion and flow-path interactions on the dynamic evolution of microstructure: arc erosion behavior of ag-SnO2 contact materials
10.1016/j.jallcom.2018.10.022 · 2019 · External reference
Resistance to arc erosion characteristics of CuO skeleton-reinforced ag-CuO contact materials
10.1016/j.jallcom.2018.05.018 · 2018 · External reference
Enhanced arc erosion and dynamic welding resistance of ag-10 wt%Ni@gr contact material
10.1016/j.ceramint.2024.03.313 · 2024 · External reference
Improving arc erosion resistance of AgNi electrical contact material by a three-dimensional graphene network
10.1016/j.powtec.2025.120902 · 2025 · External reference
Electrical characteristics of ag-10 wt%Ni@gr contact material under different load currents
10.1016/j.jallcom.2025.182514 · 2025 · External reference
Effect of graphite addition on the anti-welding performance and electric performance of ag-Ti3SiC2-C electrical contact materials
2025 · External reference
Copper matrix composites reinforced by aligned carbon nanotubes: mechanical and tribological properties
10.1016/j.matdes.2016.08.021 · 2017 · External reference
Microstructure and electrical contact properties of Al2O3-cu/(Cr, Zr) composites
2024 · External reference
High current density copper-on-copper sliding electrical contacts at low sliding velocities
10.1016/j.wear.2008.12.062 · 2009 · External reference
Microstructural evolution and current-carrying tribological performance of an ag-cu alloy subjected to surface severe plastic deformation
10.1016/j.jmst.2025.01.053 · 2025 · External reference
Current-carrying friction of ag coatings by additive manufacturing: uncovering the role of electric current
10.1080/21663831.2024.2343950 · 2024 · External reference
Tuning tribological, mechanical and electrical properties of ag-X (X=Al, in, Sn) alloys
10.1016/j.triboint.2018.04.020 · 2018 · External reference
Study on the properties of Ag-Nb2AlC composite as an electric contact material
2025 · External reference
Arc erosion mechanism and surface characteristics of TiN particles reinforced ag based electrical contact materials
10.1016/j.wear.2025.205900 · 2025 · External reference
Electrical contact resistance endurance of AgNi10 alloy under fretting wear: experiment and numerical prediction
10.1016/j.wear.2023.205009 · 2023 · External reference
Optimization of cyanide-free composite electrodeposition based on π-π interactions preparation of silver-graphene composite coatings for electrical contact materials
10.3390/nano14161349 · 2024 · External reference
Tribological properties of copper matrix composites reinforced with homogeneously dispersed graphene nanosheets
10.1016/j.jmst.2018.02.010 · 2018 · External reference
Effect of relative humidity on the frictional properties of graphene at atomic-scale steps
10.1016/j.carbon.2018.05.069 · 2018 · External reference
Towards understanding the synergistic reinforcement of erosion and impact resistance mechanisms in ag-SnO2-CuO contacts by composite nanofibres
10.1016/j.ceramint.2025.08.231 · 2025 · External reference
Influence of Ni content on arc erosion behavior of ag/Ni electrical contact materials
2023 · External reference
Microstructure and vacuum arc characteristics of CuO skeletal structure ag-CuO contact materials
10.1016/j.jallcom.2016.05.271 · 2016 · External reference
Mantis shrimp appendages-inspired ag-CuO contact: synergistically enhancing the erosion and impact resistance via gradient-layered scatter-island/chain-skeleton structure
10.1016/j.matchar.2024.114121 · 2024 · External reference
Microstructure and arc erosion behaviors of ag-CuO contact material prepared by selective laser melting
10.1016/j.jallcom.2020.158494 · 2021 · External reference
Formation and effects of CuO nanoparticles on ag/SnO2 electrical contact materials
10.1016/j.jallcom.2016.12.092 · 2017 · External reference
Nacre-mimetic alternating architecture of AgSnO2 contact: highly-efficient synergistic enhancement of in-situ self-repairing erosion resistance and naturally evolving impact resistance
2025 · External reference
Preparation of rod-like SnO2 powder and its application in ag-SnO2 electrical contact materials
2015 · External reference
Accelerated discovery of metallic glasses through iteration of machine learning and high-throughput experiments
10.1126/sciadv.aaq1566 · 2018 · External reference
Active learning accelerates the discovery of high strength and high ductility lead-free solder alloys
10.1016/j.matdes.2024.112921 · 2024 · External reference
Divide and conquer: machine learning accelerated design of lead-free solder alloys with high strength and high ductility
10.1038/s41524-023-01150-0 · 2023 · External reference
A brief review of machine learning-assisted Mg alloy design, processing, and property predictions
10.1016/j.jmrt.2024.05.139 · 2024 · External reference
Explanatory machine learning accelerates the Design of Graphene-Reinforced Aluminium Matrix Composites with superior performance
10.3390/met13101690 · 2023 · External reference
Intelligent optimization of Y2O3-doped AgSnO2 electrical contact materials: a machine learning and finite element analysis approach
2025 · External reference
Multi-objective optimization and its application in materials science
2023 · External reference
Machine learning in materials informatics: recent applications and prospects
10.1038/s41524-017-0056-5 · 2017 · External reference
Multi-objective optimization for materials design with improved NSGA-II
2021 · External reference
Multi-objective optimization for materials discovery via adaptive design
10.1038/s41598-018-21936-3 · 2018 · External reference
Breaking hardness and electrical conductivity trade-off in Cu-Ti alloys through machine learning and Pareto front
10.1080/21663831.2024.2358964 · 2024 · External reference
10.32604/cmc.2024.042752
10.32604/cmc.2024.042752 · External reference
A machine learning approach to model solute grain boundary segregation
10.1038/s41524-018-0122-7 · 2018 · External reference
Learning grain boundary segregation energy spectra in polycrystals
10.1038/s41467-020-20083-6 · 2020 · External reference
Efficient descriptors and active learning for grain boundary segregation
2023 · External reference
Learning grain boundary segregation behavior through fingerprinting complex atomic environments
10.1038/s43246-024-00616-y · 2024 · External reference
Machine learning of metal-ceramic wettability
10.1016/j.jmat.2021.03.014 · 2022 · External reference
Physical and chemical descriptors for predicting interfacial thermal resistance
2020 · External reference
Experimentally validated inverse design of multi-property Fe-Co-Ni alloys
10.1016/j.isci.2024.109723 · 2024 · External reference
Efficient searching of processing parameter space to enable inverse microstructural design of materials
10.1016/j.actamat.2023.119562 · 2024 · External reference
Machine learning aided rapid discovery of high perfor-mance silver alloy electrical contact materials
2022 · External reference
Microstructure and properties evolution of in-situ fiber-reinforced Ag-Cu-Ni-Ce alloy during deformation and heat treatment
10.1007/s12613-022-2412-9 · 2022 · External reference
Preferential oxidation of intermetallic compounds in Ag-2Sn-4La alloy
10.1016/j.corsci.2018.08.017 · 2018 · External reference
Oxidation behaviour of microstructurally highly metastable Ag-La alloy
10.3390/ma15062295 · 2022 · External reference
Investigation in the variation of Gibbs energy of formation of RE6UO12 (RE = La, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Tm, Yb, Lu) along the 4f series
10.1016/j.jct.2019.06.030 · 2019 · External reference
Thermodynamic assessment of the silver-oxygen system
10.1111/j.1151-2916.1997.tb03232.x · 1997 · External reference
Thermodynamic modelling of the cerium-oxygen system
10.1016/j.ssi.2006.02.044 · 2006 · External reference
Thermodynamic modeling of the yttrium-oxygen system
10.1016/j.calphad.2007.01.010 · 2007 · External reference
On the thermodynamic assessment of the Ag-La system
10.1016/s0925-8388(99)00686-6 · 2000 · External reference
A comparison of the structural chemistry of scandium, yttrium, lanthanum and lutetium: a contribution to the group 3 debate
10.1016/j.ccr.2021.214366 · 2022 · External reference
Covalency is frustrating: La2Sn2O7 and the nature of bonding in pyrochlores under high pressure–temperature conditions
10.1021/acs.inorgchem.8b01419 · 2018 · External reference
Red emitting Y2O3: Eu3+ nanophosphors with >80% down conversion efficiency
10.1039/c3tc31939c · 2014 · External reference
Equilibrium oxygen storage capacity of ultrathin CeO2-δ depends non-monotonically on large biaxial strain
10.1038/ncomms15360 · 2017 · External reference
Research on simulation, experiment and evaluation method of different ratio Gd doped AgSnO2 contact material
10.1109/access.2020.2982015 · 2020 · External reference
Simulation and experimental investigation on the performance of Co-, Bi-, and La-doped AgSnO2 contact interface models
10.3390/coatings15080885 · 2025 · External reference
Enhancement of arc erosion resistance in AgCuO electrical contact materials through rare earth element doping: first-principles and experimental studies
2023 · External reference
The atomic radius and the ionisation potential
10.1038/107682c0 · 1921 · External reference
Electronegativity and the stability of metal complexes
10.1038/174887a0 · 1954 · External reference
Thermodynamic assessment of the Ag-Ce (silver-cerium) system
10.1016/s0925-8388(01)01757-1 · 2002 · External reference
Thermodynamic assessments of the Ag-Y and Sc-Y systems
10.1016/j.jallcom.2008.09.053 · 2009 · External reference
Thermodynamic modelling and applications of Ce-La-O phase diagram
10.1016/s1003-6326(11)61109-6 · 2011 · External reference
Thermal prehistory, structure and high-temperature thermodynamic properties of Y2O3-CeO2 and Y2O3-ZrO2-CeO2 solid solutions
10.1016/j.ceramint.2020.12.230 · 2021 · External reference
Chemical heterogeneity and intergranular phases: governing Tb grain boundary diffusion in Nd-La-Ce-Fe-B rare earth permanent magnets
2026 · External reference
Hall–Petch strengthening limit through partially active segregation in nanocrystalline Ag-Cu alloys
10.1016/j.actamat.2021.117560 · 2022 · External reference
Silicon carbide nanowire-reinforced micro-Ag joint based on pinning effect for power electronics packaging
10.1016/j.matdes.2024.113364 · 2024 · External reference
Study on the electrical friction wear properties of Ag-G-La2O3-WS2 composites
10.1007/s11665-025-10975-3 · 2025 · External reference
Effect of grain size reduction and geometrical confinement in fine grained copper: potential applications as a material for reversible electrical contacts
10.1002/adem.200900346 · ExternalCitation · doi-reference
Improved electrical contact properties of MoS2-graphene lateral Heterostructure
10.1002/adfm.201807550 · ExternalCitation · doi-reference
Gigantic effect due to phase transition on thermoelectric properties of ionic sol-gel materials
10.1002/adfm.202208286 · ExternalCitation · doi-reference
In situ synthesis of metal sulfide nanoparticles based on 2D metal-organic framework Nanosheets
10.1002/smll.201600976 · ExternalCitation · doi-reference
Electrical contacts with 2D materials: current developments and future prospects
10.1002/smll.202206550 · ExternalCitation · doi-reference
Laser direct fabrication graphene on silver-based contact as high-end electrical product
10.1007/s10853-023-08509-0 · ExternalCitation · doi-reference
Graphene-enhanced silver composites for electrical contacts: a review
10.1007/s10853-024-09473-z · ExternalCitation · doi-reference
Use of a pressurized water treatment to prevent cracking of internal gelation sol-gel microspheres
10.1007/s10971-020-05230-1 · ExternalCitation · doi-reference
Wetting behavior and interfacial characteristic of Sn-ag-cu solder alloy on cu substrate
10.1007/s11434-010-0056-z · ExternalCitation · doi-reference
Study on the electrical friction wear properties of Ag-G-La2O3-WS2 composites
10.1007/s11665-025-10975-3 · ExternalCitation · doi-reference
Wear-resistant ag-MAX phase 3D interpenetrating-phase composites: processing, structure, and properties
10.1007/s12274-023-6015-1 · ExternalCitation · doi-reference
Preparation and microstructure characterization of a nano-sized Ti4+-doped AgSnO2 electrical contact material
10.1007/s12598-009-0005-7 · ExternalCitation · doi-reference
Effects of silver powder particle size on the microstructure and properties of ag-Yb2O3 electrical contact materials prepared by spark plasma sintering
10.1007/s12598-010-0131-2 · ExternalCitation · doi-reference
Morphology and electrical contact properties of electrical connection materials in corrosive atmosphere
10.1007/s12598-013-0032-2 · ExternalCitation · doi-reference
High-speed imaging observation on molten bridges of AgNi10 electrical contact material
10.1007/s12598-017-0911-z · ExternalCitation · doi-reference
Dry ball milling and wet ball milling for fabricating copper-yttria composites
10.1007/s12598-018-1086-y · ExternalCitation · doi-reference
Simultaneously enhancing erosion and compression resistance: designing AlCoCrFeNi high-entropy alloy strengthened ag-based contacts
10.1007/s12598-024-02750-5 · ExternalCitation · doi-reference
Influence of grain refinement on the corrosion behavior of metallic materials: a review
10.1007/s12613-021-2308-0 · ExternalCitation · doi-reference
Microstructure and properties evolution of in-situ fiber-reinforced Ag-Cu-Ni-Ce alloy during deformation and heat treatment
10.1007/s12613-022-2412-9 · ExternalCitation · doi-reference
Phase evolution of Yttria-stabilized zirconia during hybrid microwave sintering
10.1007/s13369-024-09308-8 · ExternalCitation · doi-reference
Electro-tribological properties of diamond like carbon coatings
10.1007/s40544-019-0286-2 · ExternalCitation · doi-reference
Lubrication performance of graphene in the sliding electrical contact interface
10.1007/s40544-024-0910-7 · ExternalCitation · doi-reference
Ultra-fine W-Y2O3 composite powders prepared by an improved chemical co-precipitation method and its interface structure after spark plasma sintering
10.1007/s42864-019-00021-w · ExternalCitation · doi-reference
Properties and microstructure of oxide dispersion strengthened tungsten alloy prepared by liquid-phase method: a review
10.1007/s42864-022-00180-3 · ExternalCitation · doi-reference
Strong metal-support interactions: occurrence among the binary oxides of groups IIA-VB
10.1016/0021-9517(78)90182-3 · ExternalCitation · doi-reference
Electric resistivities and solid solubilities of some rare-earth metals in silver
10.1016/0038-1098(66)90328-0 · ExternalCitation · doi-reference
The chemistry of the sol-gel process
10.1016/0167-2738(89)90338-x · ExternalCitation · doi-reference
Sol-gel ionics
10.1016/0167-2738(92)90234-g · ExternalCitation · doi-reference
The structure and properties of metal-semiconductor interfaces
10.1016/0167-5729(82)90001-2 · ExternalCitation · doi-reference
Powder metallurgy preparation of new silver-tin oxide electrical contacts from electrolessly plated composite powders
10.1016/0921-5107(91)90023-o · ExternalCitation · doi-reference
Enhanced wetting of dual-phase metallic solids by liquid metals: a new effect of interfacial reaction
10.1016/j.actamat.2013.03.039 · ExternalCitation · doi-reference
A continuum model for dislocation pile-up problems
10.1016/j.actamat.2017.01.057 · ExternalCitation · doi-reference
Wetting and solidification of silver alloys in the presence of tungsten carbide
10.1016/j.actamat.2017.11.012 · ExternalCitation · doi-reference
Hall–Petch strengthening limit through partially active segregation in nanocrystalline Ag-Cu alloys
10.1016/j.actamat.2021.117560 · ExternalCitation · doi-reference
Efficient searching of processing parameter space to enable inverse microstructural design of materials
10.1016/j.actamat.2023.119562 · ExternalCitation · doi-reference
Synthesis and characterization of Y2O3/Fe2O3/TiO2 nanoparticles by sol-gel method
10.1016/j.apcatb.2004.11.022 · ExternalCitation · doi-reference
Acetone sensing applications of ag modified TiO2 porous nanoparticles synthesized via facile hydrothermal method
10.1016/j.apsusc.2020.147383 · ExternalCitation · doi-reference
Revealing the crucial role of skeleton restructuring on erosion dispersion of ag-CuO contact materials
10.1016/j.apsusc.2022.155676 · ExternalCitation · doi-reference
Effect of in-situ phase transition of (MgCoNiCuZn)O high-entropy oxides on microstructure and performance of ag-based electrical contact materials
10.1016/j.apsusc.2023.157479 · ExternalCitation · doi-reference
Influence of different inhibitors on the conductive and corrosion resistance performance of sol-gel coatings on 6063 aluminum alloy
10.1016/j.apsusc.2025.163696 · ExternalCitation · doi-reference
Electrical characteristics for novel titanium oxide and carbide enhanced ag-based contact materials: experimental and simulation
10.1016/j.apsusc.2025.165170 · ExternalCitation · doi-reference
Thermodynamic modeling of the yttrium-oxygen system
10.1016/j.calphad.2007.01.010 · ExternalCitation · doi-reference
Effect of relative humidity on the frictional properties of graphene at atomic-scale steps
10.1016/j.carbon.2018.05.069 · ExternalCitation · doi-reference
A one-step graphene induction strategy enables in-situ controllable growth of silver nanowires for electromagnetic interference shielding
10.1016/j.carbon.2021.07.067 · ExternalCitation · doi-reference
A comparison of the structural chemistry of scandium, yttrium, lanthanum and lutetium: a contribution to the group 3 debate
10.1016/j.ccr.2021.214366 · ExternalCitation · doi-reference
Interfacial engineering of solution-processed Bi2Te3-based thermoelectric nanocomposites via graphene addition and liquid-phase-sintering process
10.1016/j.cej.2022.135882 · ExternalCitation · doi-reference
Experimental and molecular dynamics multiscale study on sintering and interfacial reaction of Fe2O3/CaO particle system
10.1016/j.cej.2024.153911 · ExternalCitation · doi-reference
Surfactant-free microwave hydrothermal synthesis of SnO2 nanosheets as an anode material for lithium battery applications
10.1016/j.ceramint.2017.09.159 · ExternalCitation · doi-reference
Measurement-based optimization and analysis of α-IGZO/ag/α-IGZO transparent conducting electrodes fabricated using DC magnetron sputter deposition
10.1016/j.ceramint.2018.06.277 · ExternalCitation · doi-reference
Porous Y2O3 fiber-reinforced silver composite exhibiting enhanced mechanical and electrical properties
10.1016/j.ceramint.2018.10.079 · ExternalCitation · doi-reference
Arc erosion behavior and mechanism of ag/Ti3SiC2 cathodes in different atmospheres
10.1016/j.ceramint.2020.09.074 · ExternalCitation · doi-reference
Thermal prehistory, structure and high-temperature thermodynamic properties of Y2O3-CeO2 and Y2O3-ZrO2-CeO2 solid solutions
10.1016/j.ceramint.2020.12.230 · ExternalCitation · doi-reference
First-principles and experimental investigations on physical properties and arc erosion behavior of metal-doped ag-SnO2 electrical contact materials
10.1016/j.ceramint.2023.05.154 · ExternalCitation · doi-reference
A new TiBN conductive ceramic powder and its application in copper-based electrical contact materials
10.1016/j.ceramint.2023.05.163 · ExternalCitation · doi-reference
Enhanced arc erosion and dynamic welding resistance of ag-10 wt%Ni@gr contact material
10.1016/j.ceramint.2024.03.313 · ExternalCitation · doi-reference
Arc erosion resistance of cu/Ti2SnC electrical contact materials under various component ratios and atmosphere conditions
10.1016/j.ceramint.2025.06.384 · ExternalCitation · doi-reference
Towards understanding the synergistic reinforcement of erosion and impact resistance mechanisms in ag-SnO2-CuO contacts by composite nanofibres
10.1016/j.ceramint.2025.08.231 · ExternalCitation · doi-reference
Cotton-templated synthesis of (MgCoNiCuZn)O entropy-stabilised tubes and their application in silver-based electrical contact materials
10.1016/j.ceramint.2026.02.117 · ExternalCitation · doi-reference
Effect of sintering temperature on microstructures and properties of ag-SnO2 electrical contact alloys prepared via stirred ball milling and hot-pressing sintering
10.1016/j.ceramint.2026.06.177 · ExternalCitation · doi-reference
Synthesis of some transition metal (M: 25Mn, 27Co, 28Ni, 29Cu, 30Zn, 47Ag, 48Cd) sulfide nanostructures by hydrothermal method
10.1016/j.cis.2017.06.007 · ExternalCitation · doi-reference
Effects of heating rate on interfacial evolution and densification behavior of high-entropy alloy-reinforced Al matrix composites during microwave sintering
10.1016/j.compositesa.2026.110015 · ExternalCitation · doi-reference
Theoretical model and finite element simulation on the effective thermal conductivity of particulate composite materials
10.1016/j.compositesb.2016.10.067 · ExternalCitation · doi-reference
Arc erosion behavior of the Al2O3-cu/(W, Cr) electrical contacts
10.1016/j.compositesb.2018.10.040 · ExternalCitation · doi-reference
Additively manufactured TiAl-based composite with a multi-stage network structure synergically enabling strength and microstructural stability
10.1016/j.compositesb.2025.112460 · ExternalCitation · doi-reference
Preferential oxidation of intermetallic compounds in Ag-2Sn-4La alloy
10.1016/j.corsci.2018.08.017 · ExternalCitation · doi-reference
Synthesis of inorganic membrane by sol-gel process
10.1016/j.desal.2007.01.187 · ExternalCitation · doi-reference
Thermal CVD growth of graphene on copper particles targeting tungsten-copper composites with superior wear and arc ablation resistance properties
10.1016/j.diamond.2020.107765 · ExternalCitation · doi-reference
The vacuum breakdown properties and arc erosion behaviors of CuTiW alloys
10.1016/j.engfailanal.2020.104865 · ExternalCitation · doi-reference
Concentration-gradient driven atom diffusion to synthesize high-loaded and sub-5 nm PtCo intermetallic compound for fuel cells
10.1016/j.esci.2025.100453 · ExternalCitation · doi-reference
Experimental study of influence factors on thermal contact resistance with theoretical model correlation
10.1016/j.icheatmasstransfer.2026.110734 · ExternalCitation · doi-reference
Fabrication and characterization of W/cu/Ni-based high specific gravity alloy with Zr and Ti combined addition
10.1016/j.ijrmhm.2021.105674 · ExternalCitation · doi-reference
Submicron coating strategy overcomes densification bottlenecks in liquid-phase sintering of immiscible WCu bimetallic systems
10.1016/j.ijrmhm.2025.107401 · ExternalCitation · doi-reference
Microwave assisted synthesis of nickel oxide nanoparticles at different pH via sol gel method: experimental and first-principles investigations
10.1016/j.inoche.2024.112415 · ExternalCitation · doi-reference
Experimentally validated inverse design of multi-property Fe-Co-Ni alloys
10.1016/j.isci.2024.109723 · ExternalCitation · doi-reference
Determination of milling parameters to obtain mechanosynthesized ZnFe2O4
10.1016/j.jallcom.2006.12.117 · ExternalCitation · doi-reference
Thermodynamic assessments of the Ag-Y and Sc-Y systems
10.1016/j.jallcom.2008.09.053 · ExternalCitation · doi-reference
Improving dispersion of SnO2 nanoparticles in ag-SnO2 electrical contact materials using template method
10.1016/j.jallcom.2013.03.094 · ExternalCitation · doi-reference
The effects of citric acid on the synthesis and performance of silver-tin oxide electrical contact materials
10.1016/j.jallcom.2013.10.222 · ExternalCitation · doi-reference
Microstructure and vacuum arc characteristics of CuO skeletal structure ag-CuO contact materials
10.1016/j.jallcom.2016.05.271 · ExternalCitation · doi-reference
Formation and effects of CuO nanoparticles on ag/SnO2 electrical contact materials
10.1016/j.jallcom.2016.12.092 · ExternalCitation · doi-reference
Novel copper-impregnated carbon strip for sliding contact materials
10.1016/j.jallcom.2017.11.311 · ExternalCitation · doi-reference
Resistance to arc erosion characteristics of CuO skeleton-reinforced ag-CuO contact materials
10.1016/j.jallcom.2018.05.018 · ExternalCitation · doi-reference
Elaborating the cu-network structured of the W-cu composites by sintering intermittently electroplated core-shell powders
10.1016/j.jallcom.2018.08.158 · ExternalCitation · doi-reference
Impact of convection-diffusion and flow-path interactions on the dynamic evolution of microstructure: arc erosion behavior of ag-SnO2 contact materials
10.1016/j.jallcom.2018.10.022 · ExternalCitation · doi-reference
Anisotropic properties of ag/Ti3AlC2 electrical contact materials prepared by equal channel angular pressing
10.1016/j.jallcom.2019.01.083 · ExternalCitation · doi-reference
Excellent anti-arc erosion performance and corresponding mechanisms of a nickel-belt-reinforced silver-based electrical contact material
10.1016/j.jallcom.2019.02.085 · ExternalCitation · doi-reference
Arc erosion dynamic of island- and skeleton-restricted microstructure evolution modes in ag-CuO contact materials
10.1016/j.jallcom.2020.154412 · ExternalCitation · doi-reference
Microstructure and arc erosion behaviors of ag-CuO contact material prepared by selective laser melting
10.1016/j.jallcom.2020.158494 · ExternalCitation · doi-reference
Effects of AgSnSe2 addition on the thermoelectric properties of Bi0.5Sb1.5Te3
10.1016/j.jallcom.2023.170399 · ExternalCitation · doi-reference
Comparative study of the microstructure and arc erosion resistance of ag/Ti2AlX (X = C, N) electrical contact materials
10.1016/j.jallcom.2023.170870 · ExternalCitation · doi-reference
Designed bimetallic layer-encapsulated tungsten powders for reinforcing tungsten-silver matrix composite electrical contact materials
10.1016/j.jallcom.2024.176470 · ExternalCitation · doi-reference
Electrical characteristics of AgTiB2Ni and AgC contact materials under different pairing modes
10.1016/j.jallcom.2025.180537 · ExternalCitation · doi-reference
Enhanced arc erosion resistance of CNTs reinforced CuCr electrical contact materials fabricated by ultrasonic spray pyrolysis
10.1016/j.jallcom.2025.181800 · ExternalCitation · doi-reference
Electrical characteristics of ag-10 wt%Ni@gr contact material under different load currents
10.1016/j.jallcom.2025.182514 · ExternalCitation · doi-reference
Three-dimensional network graphene-reinforced cu-0.12 wt% ag matrix composites for superior electrical contact performance
10.1016/j.jallcom.2025.182923 · ExternalCitation · doi-reference
Interfacial engineering for boosting electrical contact performance in perovskite-reinforced silver composites
10.1016/j.jallcom.2025.184530 · ExternalCitation · doi-reference
Investigation in the variation of Gibbs energy of formation of RE6UO12 (RE = La, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Tm, Yb, Lu) along the 4f series
10.1016/j.jct.2019.06.030 · ExternalCitation · doi-reference
Laser-arc hybrid additive manufactured AlCu alloy for T-shaped structure: microstructure evaluation and molten pool behavior
10.1016/j.jmapro.2022.04.042 · ExternalCitation · doi-reference
Machine learning of metal-ceramic wettability
10.1016/j.jmat.2021.03.014 · ExternalCitation · doi-reference
Tailoring absorptivity of highly reflective ag powders by pulsed-direct current magnetron sputtering for additive manufacturing processes
10.1016/j.jmatprotec.2023.117985 · ExternalCitation · doi-reference
Nanostructured Al/Ni energetic composites: processing, reaction properties and activation energy
10.1016/j.jmrt.2022.06.144 · ExternalCitation · doi-reference
A brief review of machine learning-assisted Mg alloy design, processing, and property predictions
10.1016/j.jmrt.2024.05.139 · ExternalCitation · doi-reference
Arc erosion resistance of Al2O3-cu/35Mo composites reinforced by trace graphene oxide
10.1016/j.jmrt.2024.06.046 · ExternalCitation · doi-reference
Enhanced strength and conductivity of CuCrZr/CuAlCrFeNi2.5 multi-principal element alloy composite via interface and configuration engineering
10.1016/j.jmrt.2025.04.288 · ExternalCitation · doi-reference
In situ synthesized 3D network structure TC4 metal matrix composites reinforced by the graphene via using laser additive manufacturing
10.1016/j.jmrt.2025.10.100 · ExternalCitation · doi-reference
Arc erosion resistance of TiB2/cu composites under different voltages
10.1016/j.jmrt.2026.04.068 · ExternalCitation · doi-reference
Tribological properties of copper matrix composites reinforced with homogeneously dispersed graphene nanosheets
10.1016/j.jmst.2018.02.010 · ExternalCitation · doi-reference
Optimized strength and conductivity of multi-scale copper alloy/metallic glass composites tuned by a one-step spark plasma sintering (SPS) process
10.1016/j.jmst.2022.04.024 · ExternalCitation · doi-reference
Melt viscosity of light alloys: Progress and challenges
10.1016/j.jmst.2023.11.002 · ExternalCitation · doi-reference
Microstructural evolution and current-carrying tribological performance of an ag-cu alloy subjected to surface severe plastic deformation
10.1016/j.jmst.2025.01.053 · ExternalCitation · doi-reference
Enhancing the cavitation erosion resistance of additive manufactured Al-Si alloys with strong connective Si networks
10.1016/j.jmst.2025.02.006 · ExternalCitation · doi-reference
Mantis shrimp appendages-inspired ag-CuO contact: synergistically enhancing the erosion and impact resistance via gradient-layered scatter-island/chain-skeleton structure
10.1016/j.matchar.2024.114121 · ExternalCitation · doi-reference
Arc erosion properties of CuCr/Ti3C2 under elevated voltages and repetitive arc breakdowns
10.1016/j.matchar.2024.114601 · ExternalCitation · doi-reference
Tailoring electrical contact properties of cu-5wt%W composites through HfC and TaC nanoparticle addition
10.1016/j.matchar.2025.115128 · ExternalCitation · doi-reference
Effects of coating process on the characteristics of ag-SnO2 contact materials
10.1016/j.matchemphys.2005.09.067 · ExternalCitation · doi-reference
Arc erosion behavior of ag/Ni electrical contact materials
10.1016/j.matdes.2015.06.142 · ExternalCitation · doi-reference
Effect of WC particle size and ag volume fraction on electrical contact resistance and thermal conductivity of ag-WC contact materials
10.1016/j.matdes.2015.07.006 · ExternalCitation · doi-reference
Copper matrix composites reinforced by aligned carbon nanotubes: mechanical and tribological properties
10.1016/j.matdes.2016.08.021 · ExternalCitation · doi-reference
Influence of WO3 addition on the material transfer behavior of the AgTiB2 contact material
10.1016/j.matdes.2017.02.059 · ExternalCitation · doi-reference
Novel processing of ag-WC electrical contact materials using spark plasma sintering
10.1016/j.matdes.2017.02.070 · ExternalCitation · doi-reference
Active learning accelerates the discovery of high strength and high ductility lead-free solder alloys
10.1016/j.matdes.2024.112921 · ExternalCitation · doi-reference
Silicon carbide nanowire-reinforced micro-Ag joint based on pinning effect for power electronics packaging
10.1016/j.matdes.2024.113364 · ExternalCitation · doi-reference
Electrohydrodynamic redox printing vs magnetron sputtering: enhancing hardness of nanoporous silver with twinning and structural order
10.1016/j.matdes.2025.113909 · ExternalCitation · doi-reference
Microwave-assisted synthesis and investigation of SnO2 nanoparticles
10.1016/j.matlet.2009.01.032 · ExternalCitation · doi-reference
The effect of dispersed Ni particles on the microstructure and performance evolution of 3D Ni network reinforced ag-based contact materials during hot extrusion
10.1016/j.msea.2025.148871 · ExternalCitation · doi-reference
Iron series metal-organic frameworks and their composite nanomaterials: controllable synthesis and clean energy applications
10.1016/j.nanoen.2024.109559 · ExternalCitation · doi-reference
Sol-gel based materials for biomedical applications
10.1016/j.pmatsci.2015.12.001 · ExternalCitation · doi-reference
Recent progress in low-dimensional nanomaterials filled multifunctional metal matrix nanocomposites
10.1016/j.pmatsci.2022.101034 · ExternalCitation · doi-reference
Recent advances in processing, and mechanical, thermal and electrical properties of cu-SiC metal matrix composites prepared by powder metallurgy
10.1016/j.pmatsci.2023.101191 · ExternalCitation · doi-reference
Fabrication and arc erosion behaviors of AgTiB2 contact materials
10.1016/j.powtec.2014.01.068 · ExternalCitation · doi-reference
The ball to powder ratio (BPR) dependent morphology and microstructure of tungsten powder refined by ball milling
10.1016/j.powtec.2018.07.094 · ExternalCitation · doi-reference
Improving arc erosion resistance of AgNi electrical contact material by a three-dimensional graphene network
10.1016/j.powtec.2025.120902 · ExternalCitation · doi-reference
Atomic insight in fusion mechanism of heterogeneous and homogeneous sintering: cu and ag nanoparticles
10.1016/j.rinp.2024.107411 · ExternalCitation · doi-reference
Thermodynamic modelling of the cerium-oxygen system
10.1016/j.ssi.2006.02.044 · ExternalCitation · doi-reference
The influence of chemical and phase composition on mechanical, tribological and electrical properties of silver-aluminum alloys
10.1016/j.triboint.2017.11.026 · ExternalCitation · doi-reference
Tuning tribological, mechanical and electrical properties of ag-X (X=Al, in, Sn) alloys
10.1016/j.triboint.2018.04.020 · ExternalCitation · doi-reference
Volumetric contact theory to electrical contact between random rough surfaces
10.1016/j.triboint.2021.107007 · ExternalCitation · doi-reference
Fabrication of high thermal conductivity and wear resistance graphite/copper composites by microwave hot press sintering
10.1016/j.triboint.2024.109522 · ExternalCitation · doi-reference
High current density copper-on-copper sliding electrical contacts at low sliding velocities
10.1016/j.wear.2008.12.062 · ExternalCitation · doi-reference
Electrical contact resistance endurance of AgNi10 alloy under fretting wear: experiment and numerical prediction
10.1016/j.wear.2023.205009 · ExternalCitation · doi-reference
Arc erosion mechanism and surface characteristics of TiN particles reinforced ag based electrical contact materials
10.1016/j.wear.2025.205900 · ExternalCitation · doi-reference
Chemical kinetics at solid/solid interfaces
10.1016/s0167-2738(02)00270-9 · ExternalCitation · doi-reference
A step-by-step method of rule-of-mixture of fiber- and particle-reinforced composite materials
10.1016/s0263-8223(98)00033-6 · ExternalCitation · doi-reference
Thermodynamic assessment of the Ag-Ce (silver-cerium) system
10.1016/s0925-8388(01)01757-1 · ExternalCitation · doi-reference
Ternary rare earth (R) alloys occurring in the RAg2-RGa2 section
10.1016/s0925-8388(98)00785-3 · ExternalCitation · doi-reference
On the thermodynamic assessment of the Ag-La system
10.1016/s0925-8388(99)00686-6 · ExternalCitation · doi-reference
Microstructural and mechanical characteristics of in situ metal matrix composites
10.1016/s0927-796x(00)00024-3 · ExternalCitation · doi-reference
Arc erosion behavior of a nanocomposite W-cu electrical contact material
10.1016/s1001-0521(06)60011-9 · ExternalCitation · doi-reference
Thermodynamic modelling and applications of Ce-La-O phase diagram
10.1016/s1003-6326(11)61109-6 · ExternalCitation · doi-reference
Interface structure of ag/SnO2 nanocomposite fabricated by reactive synthesis
10.1016/s1005-0302(10)60008-4 · ExternalCitation · doi-reference
In situ synthesis of metal nanoparticle embedded hybrid soft nanomaterials
10.1021/acs.accounts.6b00201 · ExternalCitation · doi-reference
Sol-gel processing of metal-organic frameworks
10.1021/acs.chemmater.6b03934 · ExternalCitation · doi-reference
Covalency is frustrating: La2Sn2O7 and the nature of bonding in pyrochlores under high pressure–temperature conditions
10.1021/acs.inorgchem.8b01419 · ExternalCitation · doi-reference
Bionic multilevel composite structures Design in ag-CuO contacts for synergistically enhancing Erosion and impact resistance
10.1021/acsami.5c11098 · ExternalCitation · doi-reference
Nanostructured phosphorus doped silicon/graphite composite as anode for high-performance Lithium-ion batteries
10.1021/acsami.7b04361 · ExternalCitation · doi-reference
Nanoscale mapping of carrier Mobilities in the ballistic transports of carbon nanotube networks
10.1021/acsnano.2c10715 · ExternalCitation · doi-reference
Chemical routes in the synthesis of nanomaterials using the sol-gel process
10.1021/ar7000149 · ExternalCitation · doi-reference
The sol-gel process
10.1021/cr00099a003 · ExternalCitation · doi-reference
Synchrotron techniques for in situ catalytic studies: capabilities, challenges, and opportunities
10.1021/cs3004006 · ExternalCitation · doi-reference
Hydrolysis of tin(II) neo-pentoxide: syntheses, characterization, and X-ray structures of [Sn(ONep)2]∞, Sn5(μ3-O)2(μ-ONep)6, and Sn6(μ3-O)4(μ-ONep)4 where ONep = OCH2CMe3
10.1021/ic011247f · ExternalCitation · doi-reference
The atomic radius and the ionisation potential
10.1038/107682c0 · ExternalCitation · doi-reference
Electronegativity and the stability of metal complexes
10.1038/174887a0 · ExternalCitation · doi-reference
Burning voltage of arcs in high vacuum
10.1038/181475a0 · ExternalCitation · doi-reference
Understanding the valency of rare earths from first-principles theory
10.1038/21595 · ExternalCitation · doi-reference
Sintering dense nanocrystalline ceramics without final-stage grain growth
10.1038/35004548 · ExternalCitation · doi-reference
Equilibrium oxygen storage capacity of ultrathin CeO2-δ depends non-monotonically on large biaxial strain
10.1038/ncomms15360 · ExternalCitation · doi-reference
Premature failure of an additively manufactured material
10.1038/s41427-020-0212-0 · ExternalCitation · doi-reference
Learning grain boundary segregation energy spectra in polycrystals
10.1038/s41467-020-20083-6 · ExternalCitation · doi-reference
Machine learning in materials informatics: recent applications and prospects
10.1038/s41524-017-0056-5 · ExternalCitation · doi-reference
A machine learning approach to model solute grain boundary segregation
10.1038/s41524-018-0122-7 · ExternalCitation · doi-reference
Divide and conquer: machine learning accelerated design of lead-free solder alloys with high strength and high ductility
10.1038/s41524-023-01150-0 · ExternalCitation · doi-reference
Machine learning for molecular and materials science
10.1038/s41586-018-0337-2 · ExternalCitation · doi-reference
Multi-objective optimization for materials discovery via adaptive design
10.1038/s41598-018-21936-3 · ExternalCitation · doi-reference
A work-function-tunable 2D alloy for electrical contacts
10.1038/s41928-023-01063-2 · ExternalCitation · doi-reference
Learning grain boundary segregation behavior through fingerprinting complex atomic environments
10.1038/s43246-024-00616-y · ExternalCitation · doi-reference
Chemical vapour deposition
10.1038/s43586-020-00005-y · ExternalCitation · doi-reference
Red emitting Y2O3: Eu3+ nanophosphors with >80% down conversion efficiency
10.1039/c3tc31939c · ExternalCitation · doi-reference
Sintering of multiple cu-ag core-shell nanoparticles and properties of nanoparticle-sintered structures
10.1039/c7ra02611k · ExternalCitation · doi-reference
Novel green manufacture of metallic aluminum coatings on carbon steel by sol-gel method
10.1039/d0ra08175b · ExternalCitation · doi-reference
Progress in aluminium and magnesium matrix composites obtained by spark plasma, microwave and induction sintering
10.1080/09506608.2022.2077029 · ExternalCitation · doi-reference
Current-carrying friction of ag coatings by additive manufacturing: uncovering the role of electric current
10.1080/21663831.2024.2343950 · ExternalCitation · doi-reference
Breaking hardness and electrical conductivity trade-off in Cu-Ti alloys through machine learning and Pareto front
10.1080/21663831.2024.2358964 · ExternalCitation · doi-reference
Investigation of graphene as a material for electrical contacts in the application of microrelays using finite element modeling
10.1088/2053-1591/ab3085 · ExternalCitation · doi-reference
Arc erosion behaviour of in-situ TiB2/cu composites with a three-dimensional network structure
10.1088/2053-1591/ac6091 · ExternalCitation · doi-reference
A highly alkaline-stable metal oxide@metal-organic framework composite for high-performance electrochemical energy storage
10.1093/nsr/nwz137 · ExternalCitation · doi-reference
Formation of an electric dipole at metal-semiconductor interfaces
10.1103/physrevb.64.205310 · ExternalCitation · doi-reference
Research on simulation, experiment and evaluation method of different ratio Gd doped AgSnO2 contact material
10.1109/access.2020.2982015 · ExternalCitation · doi-reference
Electrical contact resistance of coated spherical contacts
10.1109/ted.2016.2612545 · ExternalCitation · doi-reference
Thermodynamic assessment of the silver-oxygen system
10.1111/j.1151-2916.1997.tb03232.x · ExternalCitation · doi-reference
Band offsets, Schottky barrier heights, and their effects on electronic devices
10.1116/1.4818426 · ExternalCitation · doi-reference
Accelerated discovery of metallic glasses through iteration of machine learning and high-throughput experiments
10.1126/sciadv.aaq1566 · ExternalCitation · doi-reference
The effect of size-dependent nanoparticle energetics on catalyst sintering
10.1126/science.1075094 · ExternalCitation · doi-reference
Chemical vapor deposition of layered two-dimensional MoSi2N4 materials
10.1126/science.abb7023 · ExternalCitation · doi-reference
Chemical kinetics at solid-solid interfaces
10.1351/pac200072112137 · ExternalCitation · doi-reference
10.32604/cmc.2024.042752
10.32604/cmc.2024.042752 · ExternalCitation · doi-reference
Simulation and experimental investigation on the performance of Co-, Bi-, and La-doped AgSnO2 contact interface models
10.3390/coatings15080885 · ExternalCitation · doi-reference
Oxidation behaviour of microstructurally highly metastable Ag-La alloy
10.3390/ma15062295 · ExternalCitation · doi-reference
Quasi-continuous network structure greatly improved the anti-arc-Erosion capability of ag/Y2O3 electrical contacts
10.3390/ma15072450 · ExternalCitation · doi-reference
Electrical properties of in situ synthesized ag-graphene/Ni composites
10.3390/ma15186423 · ExternalCitation · doi-reference
Kinetic study of oxidation of ag-Sn-Zn solid solution powders via hot Mechanochemical processing
10.3390/ma17205115 · ExternalCitation · doi-reference
Explanatory machine learning accelerates the Design of Graphene-Reinforced Aluminium Matrix Composites with superior performance
10.3390/met13101690 · ExternalCitation · doi-reference
Optimization of cyanide-free composite electrodeposition based on π-π interactions preparation of silver-graphene composite coatings for electrical contact materials
10.3390/nano14161349 · ExternalCitation · doi-reference
Simulation and experimental study on the properties of Y- and Ce-doped AgSnO2 electrical contact materials
10.5772/intechopen.1004978 · ExternalCitation · doi-reference
