Research graph
References from Interlayer bond deterioration of 3D-printed ultra-high performance concrete under freeze-thaw cycles: damage evolution and governing mechanisms. Local targets link to admitted publications; unresolved targets remain external evidence.
Durability properties of 3D printed concrete (3DPC)
10.1016/j.autcon.2022.104479 · 2022 · External reference
FloatArch: a cable-supported, unreinforced, and re-assemblable 3D-printed concrete structure designed using multi-material topology optimization
2024 · External reference
Effect of processing on the air void system of 3D printed concrete
10.1016/j.cemconres.2022.106789 · 2022 · External reference
Mix design concepts for 3D printable concrete: a review
10.1016/j.cemconcomp.2021.104155 · 2021 · External reference
Recent development of innovative steel fibers for ultra-high-performance concrete (UHPC): a critical review
10.1016/j.cemconcomp.2023.105359 · 2024 · External reference
Comparative optimization of densified system of ultra-fine particles (DSP) and Horsfield filling toward UHPC fabrication
10.1016/j.cemconcomp.2023.105267 · 2023 · External reference
Intrinsic effect of hybrid fibres 3D network on the electrochemical characteristics of Ultra-High Performance Fibre Reinforced Composites (UHPFRC)
10.1016/j.cemconcomp.2020.103818 · 2020 · External reference
Printing large size eggshell-shaped elements with ultra-high-performance concrete: from material design to structural bearing capacity assessment
10.1016/j.conbuildmat.2025.139983 · 2025 · External reference
Fiber alignment mechanism in 3D-printed ultra-high performance concrete based on fluid dynamics theory
10.1016/j.cemconres.2025.108011 · 2025 · External reference
Integrating prestress into 3D printed ultra-high performance concrete composite beams for superior flexural performance
10.1016/j.engstruct.2025.121255 · 2025 · External reference
Qualitative assessment of interfacial bonding in 3D printing concrete exposed to frost attack
2020 · External reference
Layer-interface properties in 3D printed concrete: dual hierarchical structure and micromechanical characterization
10.1016/j.cemconres.2020.106220 · 2020 · External reference
Transport properties of 3D printed cementitious materials with prolonged time gap between successive layers
10.1016/j.cemconres.2022.106777 · 2022 · External reference
Hardened properties of 3D printed concrete: the influence of process parameters on interlayer adhesion
10.1016/j.cemconres.2019.02.017 · 2019 · External reference
Modelling the interlayer bond strength of 3D printed concrete with surface moisture
10.1016/j.cemconres.2021.106559 · 2021 · External reference
A concise review on interlayer bond strength in 3D concrete printing
10.3390/su13137137 · 2021 · External reference
A novel method to enhance the interlayer bonding of 3D printing concrete: an experimental and computational investigation
10.1016/j.cemconcomp.2019.03.008 · 2019 · External reference
Finite element analysis on the anisotropic behavior of 3D printed concrete under compression and flexure
2021 · External reference
Anisotropic behavior in bending of 3D printed concrete reinforced with fibers
10.1016/j.compstruct.2020.112808 · 2020 · External reference
Measurement of tensile bond strength of 3D printed geopolymer mortar
10.1016/j.measurement.2017.08.051 · 2018 · External reference
Time gap effect on bond strength of 3D-printed concrete
10.1080/17452759.2018.1500420 · 2019 · External reference
Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification
10.1016/j.matdes.2019.107684 · 2019 · External reference
Surface modification as a technique to improve inter-layer bonding strength in 3D printed cementitious materials
10.21809/rilemtechlett.2019.84 · 2019 · External reference
Interlayer bonding improvement of 3D printed concrete with polymer modified mortar: experiments and molecular dynamics studies
10.1016/j.cemconcomp.2020.103571 · 2020 · External reference
Investigation of interlayer adhesion of 3D printable cementitious material from the aspect of printing process
10.1016/j.cemconres.2021.106386 · 2021 · External reference
Freeze-thaw resistance of ultra-high performance concrete: dependence on concrete composition
10.1016/j.conbuildmat.2021.123523 · 2021 · External reference
Freeze-thaw resistance of 3D-printed composites with desert sand
10.1016/j.cemconcomp.2022.104693 · 2022 · External reference
Freeze-thaw durability of 3D printed concrete: a comprehensive review of mechanisms, materials, and testing strategies
10.3390/civileng6030047 · 2025 · External reference
3D printed concrete with recycled coarse aggregate: freeze-thaw resistance assessment and damage mechanisms
10.1016/j.cemconres.2025.108095 · 2026 · External reference
Effect of X-ray CT characterized pore structure on the freeze-thaw resistance of 3D printed concrete with recycled coarse aggregate
10.1016/j.conbuildmat.2025.140492 · 2025 · External reference
Effect of steel fiber shape and content on printability, microstructure and mechanical properties of 3D printable high strength cementitious materials
2024 · External reference
Printability and mechanical properties of 3D printing ultra-high performance concrete incorporating limestone powder
10.1016/j.conbuildmat.2024.136195 · 2024 · External reference
Characteristics of 3D-printing ultrahigh performance fibre-reinforced concrete under impact loading
10.1016/j.ijimpeng.2022.104205 · 2022 · External reference
3D printing of ultra-high-performance concrete: shape stability for various printing systems
10.1016/j.conbuildmat.2024.139039 · 2024 · External reference
Rheological characterization of ultra-high performance concrete for 3D printing
10.1016/j.cemconcomp.2022.104854 · 2023 · External reference
Effect of hydration process on the interlayer bond tensile mechanical properties of ultra-high performance concrete for 3D printing
10.1016/j.conbuildmat.2024.138902 · 2024 · External reference
Interface bonding characteristics of 3D printed ultra-high performance concrete after elevated temperatures
2024 · External reference
The influence of pore structure and fiber orientation on anisotropic mechanical property of 3D printed ultra-high-performance concrete
10.1016/j.conbuildmat.2025.140760 · 2025 · External reference
Printability and fire performance of a developed 3D printable fibre reinforced cementitious composites under elevated temperatures
10.1080/17452759.2018.1555046 · 2019 · External reference
Hardening characterisation of a non-proprietary and more eco-friendly UHPC
10.1016/j.conbuildmat.2022.129803 · 2023 · External reference
Modeling fiber alignment in 3D printed ultra-high-performance concrete based on stereology theory
10.1016/j.cemconcomp.2024.105786 · 2024 · External reference
Unresolved reference
2009 · External reference
Investigation of microstructural damage in ultrahigh-performance concrete under freezing-thawing action
10.1155/2018/3701682 · 2018 · External reference
Unresolved reference
2019 · External reference
Interlayer bond strength testing in 3D-printed mineral materials for construction applications
10.3390/ma15124112 · 2022 · External reference
Automated crack detection and measurement based on digital image correlation
10.1016/j.conbuildmat.2020.119383 · 2020 · External reference
Development of the strain field along the crack in ultra-high-performance fiber-reinforced concrete (UHPFRC) under bending by digital image correlation technique
10.1016/j.cemconres.2019.105821 · 2019 · External reference
Influence of pore defects on the hardened properties of 3D printed concrete with coarse aggregate
2022 · External reference
Interfacial bond effects on the shear strength and damage in 3D-printed concrete structures: a combined experimental and numerical study
10.1016/j.engfracmech.2025.110840 · 2025 · External reference
Effect of surface moisture on inter-layer strength of 3D printed concrete
10.1016/j.conbuildmat.2018.03.232 · 2018 · External reference
Interfacial bond in concrete-to-concrete composites: a review
10.1016/j.conbuildmat.2022.129195 · 2022 · External reference
Effect of time interval on the interlayer adhesion of 3D printed concrete with recycled sand: Multi-factor influencing mechanisms and superabsorbent polymer enhancement
2024 · External reference
Correlation between pore characteristics and tensile bond strength of additive manufactured mortar using X-ray computed tomography
10.1016/j.conbuildmat.2019.07.161 · 2019 · External reference
Mechanical and microstructural characterization of interlayer bonding in multi-material 3D-Printed concrete
10.1016/j.cemconcomp.2025.106308 · 2026 · External reference
Unresolved reference
2019 · External reference
Unresolved reference
2023 · External reference
Durability properties of 3D printed concrete (3DPC)
10.1016/j.autcon.2022.104479 · ExternalCitation · doi-reference
A novel method to enhance the interlayer bonding of 3D printing concrete: an experimental and computational investigation
10.1016/j.cemconcomp.2019.03.008 · ExternalCitation · doi-reference
Interlayer bonding improvement of 3D printed concrete with polymer modified mortar: experiments and molecular dynamics studies
10.1016/j.cemconcomp.2020.103571 · ExternalCitation · doi-reference
Intrinsic effect of hybrid fibres 3D network on the electrochemical characteristics of Ultra-High Performance Fibre Reinforced Composites (UHPFRC)
10.1016/j.cemconcomp.2020.103818 · ExternalCitation · doi-reference
Mix design concepts for 3D printable concrete: a review
10.1016/j.cemconcomp.2021.104155 · ExternalCitation · doi-reference
Freeze-thaw resistance of 3D-printed composites with desert sand
10.1016/j.cemconcomp.2022.104693 · ExternalCitation · doi-reference
Rheological characterization of ultra-high performance concrete for 3D printing
10.1016/j.cemconcomp.2022.104854 · ExternalCitation · doi-reference
Comparative optimization of densified system of ultra-fine particles (DSP) and Horsfield filling toward UHPC fabrication
10.1016/j.cemconcomp.2023.105267 · ExternalCitation · doi-reference
Recent development of innovative steel fibers for ultra-high-performance concrete (UHPC): a critical review
10.1016/j.cemconcomp.2023.105359 · ExternalCitation · doi-reference
Modeling fiber alignment in 3D printed ultra-high-performance concrete based on stereology theory
10.1016/j.cemconcomp.2024.105786 · ExternalCitation · doi-reference
Mechanical and microstructural characterization of interlayer bonding in multi-material 3D-Printed concrete
10.1016/j.cemconcomp.2025.106308 · ExternalCitation · doi-reference
Hardened properties of 3D printed concrete: the influence of process parameters on interlayer adhesion
10.1016/j.cemconres.2019.02.017 · ExternalCitation · doi-reference
Development of the strain field along the crack in ultra-high-performance fiber-reinforced concrete (UHPFRC) under bending by digital image correlation technique
10.1016/j.cemconres.2019.105821 · ExternalCitation · doi-reference
Layer-interface properties in 3D printed concrete: dual hierarchical structure and micromechanical characterization
10.1016/j.cemconres.2020.106220 · ExternalCitation · doi-reference
Investigation of interlayer adhesion of 3D printable cementitious material from the aspect of printing process
10.1016/j.cemconres.2021.106386 · ExternalCitation · doi-reference
Modelling the interlayer bond strength of 3D printed concrete with surface moisture
10.1016/j.cemconres.2021.106559 · ExternalCitation · doi-reference
Transport properties of 3D printed cementitious materials with prolonged time gap between successive layers
10.1016/j.cemconres.2022.106777 · ExternalCitation · doi-reference
Effect of processing on the air void system of 3D printed concrete
10.1016/j.cemconres.2022.106789 · ExternalCitation · doi-reference
Fiber alignment mechanism in 3D-printed ultra-high performance concrete based on fluid dynamics theory
10.1016/j.cemconres.2025.108011 · ExternalCitation · doi-reference
3D printed concrete with recycled coarse aggregate: freeze-thaw resistance assessment and damage mechanisms
10.1016/j.cemconres.2025.108095 · ExternalCitation · doi-reference
Anisotropic behavior in bending of 3D printed concrete reinforced with fibers
10.1016/j.compstruct.2020.112808 · ExternalCitation · doi-reference
Effect of surface moisture on inter-layer strength of 3D printed concrete
10.1016/j.conbuildmat.2018.03.232 · ExternalCitation · doi-reference
Correlation between pore characteristics and tensile bond strength of additive manufactured mortar using X-ray computed tomography
10.1016/j.conbuildmat.2019.07.161 · ExternalCitation · doi-reference
Automated crack detection and measurement based on digital image correlation
10.1016/j.conbuildmat.2020.119383 · ExternalCitation · doi-reference
Freeze-thaw resistance of ultra-high performance concrete: dependence on concrete composition
10.1016/j.conbuildmat.2021.123523 · ExternalCitation · doi-reference
Interfacial bond in concrete-to-concrete composites: a review
10.1016/j.conbuildmat.2022.129195 · ExternalCitation · doi-reference
Hardening characterisation of a non-proprietary and more eco-friendly UHPC
10.1016/j.conbuildmat.2022.129803 · ExternalCitation · doi-reference
Printability and mechanical properties of 3D printing ultra-high performance concrete incorporating limestone powder
10.1016/j.conbuildmat.2024.136195 · ExternalCitation · doi-reference
Effect of hydration process on the interlayer bond tensile mechanical properties of ultra-high performance concrete for 3D printing
10.1016/j.conbuildmat.2024.138902 · ExternalCitation · doi-reference
3D printing of ultra-high-performance concrete: shape stability for various printing systems
10.1016/j.conbuildmat.2024.139039 · ExternalCitation · doi-reference
Printing large size eggshell-shaped elements with ultra-high-performance concrete: from material design to structural bearing capacity assessment
10.1016/j.conbuildmat.2025.139983 · ExternalCitation · doi-reference
Effect of X-ray CT characterized pore structure on the freeze-thaw resistance of 3D printed concrete with recycled coarse aggregate
10.1016/j.conbuildmat.2025.140492 · ExternalCitation · doi-reference
The influence of pore structure and fiber orientation on anisotropic mechanical property of 3D printed ultra-high-performance concrete
10.1016/j.conbuildmat.2025.140760 · ExternalCitation · doi-reference
Interfacial bond effects on the shear strength and damage in 3D-printed concrete structures: a combined experimental and numerical study
10.1016/j.engfracmech.2025.110840 · ExternalCitation · doi-reference
Integrating prestress into 3D printed ultra-high performance concrete composite beams for superior flexural performance
10.1016/j.engstruct.2025.121255 · ExternalCitation · doi-reference
Characteristics of 3D-printing ultrahigh performance fibre-reinforced concrete under impact loading
10.1016/j.ijimpeng.2022.104205 · ExternalCitation · doi-reference
Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification
10.1016/j.matdes.2019.107684 · ExternalCitation · doi-reference
Measurement of tensile bond strength of 3D printed geopolymer mortar
10.1016/j.measurement.2017.08.051 · ExternalCitation · doi-reference
Time gap effect on bond strength of 3D-printed concrete
10.1080/17452759.2018.1500420 · ExternalCitation · doi-reference
Printability and fire performance of a developed 3D printable fibre reinforced cementitious composites under elevated temperatures
10.1080/17452759.2018.1555046 · ExternalCitation · doi-reference
Investigation of microstructural damage in ultrahigh-performance concrete under freezing-thawing action
10.1155/2018/3701682 · ExternalCitation · doi-reference
Surface modification as a technique to improve inter-layer bonding strength in 3D printed cementitious materials
10.21809/rilemtechlett.2019.84 · ExternalCitation · doi-reference
Freeze-thaw durability of 3D printed concrete: a comprehensive review of mechanisms, materials, and testing strategies
10.3390/civileng6030047 · ExternalCitation · doi-reference
Interlayer bond strength testing in 3D-printed mineral materials for construction applications
10.3390/ma15124112 · ExternalCitation · doi-reference
A concise review on interlayer bond strength in 3D concrete printing
10.3390/su13137137 · ExternalCitation · doi-reference
