Contact and support
Need help, have a question, or want to contact the ResearchHub team?
© 2026 ResearchHub. Built for responsible scholarly connection.
Privacy-aware community infrastructureResearch graph
References from Towards autonomous triaging for end-of-life EV components: a critical review and diagnostic-to-decision framework. Local targets link to admitted publications; unresolved targets remain external evidence.
Experimental study of internal and external short circuits of commercial automotive pouch lithium-ion cells
10.1016/j.est.2018.01.015 · 2018 · External reference
Fault Detection of the Electrical Motors Based on Vibration Analysis
10.1016/j.protcy.2015.02.078 · 2015 · External reference
Techno-economic and environmental disassembly planning of lithium-ion electric vehicle battery packs for remanufacturing
10.1016/j.resconrec.2019.104461 · 2020 · External reference
A comparative experimental study on the use of acoustic emission and vibration analysis for bearing defect identification and estimation of defect size
10.1016/j.ymssp.2004.10.013 · 2006 · External reference
Fault diagnosis and health management of bearings in rotating equipment based on vibration analysis – a review
10.21595/jve.2021.22100 · 2022 · External reference
Advanced analysis of motor currents for the diagnosis of the rotor condition in electric motors operating in mining facilities
10.1109/tia.2018.2818671 · 2018 · External reference
Circular economy strategies for electric vehicle batteries reduce reliance on raw materials
10.1038/s41893-020-00607-0 · 2020 · External reference
A critical review of thermal issues in lithium-ion batteries
10.1149/1.3515880 · 2011 · External reference
Toward a framework for levels of robot autonomy in human-robot interaction
10.5898/jhri.3.2.beer · 2014 · External reference
Sensorless speed estimation for the diagnosis of induction motors via MCSA
2021 · External reference
Challenges in supply chain redesign for the Circular Economy: a literature review and a multiple case study
10.1080/00207543.2018.1542176 · 2019 · External reference
Circular Economy in the WEEE industry: a systematic literature review and a research agenda
10.1016/j.spc.2020.05.007 · 2020 · External reference
Real-Time Model-Based Estimation of SOC and SOH for Energy Storage Systems
10.1109/tpel.2016.2535321 · 2017 · External reference
A general framework for lithium-ion battery state of health estimation: From laboratory tests to machine learning with transferability across domains
10.1016/j.apenergy.2024.125086 · 2025 · External reference
Demagnetization Fault Diagnosis of a PMSM Using Auto-Encoder and K-Means Clustering
10.3390/en13174467 · 2020 · External reference
State-of-charge estimation of Li-ion batteries using deep neural networks: A machine learning approach
10.1016/j.jpowsour.2018.06.104 · 2018 · External reference
Current and position sensor fault diagnosis algorithm for PMSM drives based on robust state observer
10.1109/tie.2020.2992977 · 2021 · External reference
Condition monitoring and fault diagnosis of induction motors: a review
10.1007/s11831-018-9286-z · 2019 · External reference
10.1016/j.ccc.2019.06.009
10.1016/j.ccc.2019.06.009 · 2019 · External reference
Unresolved reference
External reference
Modeling vaporization, gas generation and venting in li-ion battery cells with a dimethyl carbonate electrolyte
10.1149/2.0631709jes · 2017 · External reference
From model, signal to knowledge: A data-driven perspective of fault detection and diagnosis
10.1109/tii.2013.2243743 · 2013 · External reference
Analyzing electric vehicle battery health performance using supervised machine learning
10.1016/j.rser.2023.113967 · 2024 · External reference
Induction machines fault detection: An overview
10.1109/mim.2021.9549228 · 2021 · External reference
Review on modeling and SOC/SOH estimation of batteries for automotive applications
10.3390/batteries10010034 · 2024 · External reference
Synthesize battery degradation modes via a diagnostic and prognostic model
10.1016/j.jpowsour.2012.07.016 · 2012 · External reference
Pyrometallurgical Processes for the Recovery of Metals from WEEE
2016 · External reference
Current trends for state-of-charge (SoC) estimation in lithium-ion battery electric vehicles
10.3390/en14113284 · 2021 · External reference
Extending the electric vehicle battery first life: Performance beyond the current end of life threshold
10.1016/j.heliyon.2024.e26066 · 2024 · External reference
Effectiveness analysis of pmsm motor rolling bearing fault detectors based on vibration analysis and shallow neural networks
10.3390/en14030712 · 2021 · External reference
Unresolved reference
2012 · External reference
Elucidating copper dissolution phenomenon in li-ion cells under overdischarge extremes
10.1149/2.0671809jes · 2018 · External reference
Barriers to electric vehicle battery recycling in a circular economy: An interpretive structural modeling
10.1016/j.jclepro.2024.143224 · 2024 · External reference
Closing the loop on circular economy in transportation electrification: reuse, repurposing, and recycling of batteries, power electronics, and electric machines
10.1109/jestie.2025.3530914 · 2025 · External reference
Characterising thermal runaway within lithium-ion cells by inducing and monitoring internal short circuits
10.1039/c7ee00385d · 2017 · External reference
A Sensor fault detection and isolation method in interior permanent-magnet synchronous motor drives based on an extended kalman filter
10.1109/tie.2013.2244537 · 2013 · External reference
Review of battery management systems (BMS) development and industrial standards
10.3390/technologies9020028 · 2021 · External reference
Mechanism of thermal runaway in lithium-ion cells
10.1149/2.0611807jes · 2018 · External reference
A Survey of fault diagnosis and fault-tolerant techniques—Part I: fault diagnosis with model-based and signal-based approaches
10.1109/tie.2015.2417501 · 2015 · External reference
The Circular Economy – A new sustainability paradigm?
10.1016/j.jclepro.2016.12.048 · 2017 · External reference
Data-driven prediction in dynamical systems: recent developments
10.1098/rsta.2021.0213 · 2022 · External reference
Electric vehicle battery state of health estimation using incremental capacity analysis
10.1016/j.est.2023.107110 · 2023 · External reference
Diagnosis of stator faults of the single-phase induction motor using acoustic signals
10.1016/j.apacoust.2016.10.012 · 2017 · External reference
Broken bar diagnosis for squirrel cage induction motors using frequency analysis based on MCSA and continuous wavelet transform
2017 · External reference
Machinery faults detection using acoustic emission signal
2011 · External reference
Condition monitoring and fault diagnosis of induction motor
10.1007/s42417-020-00253-y · 2021 · External reference
Static eccentricity fault diagnosis using the signatures analysis of stator current and air gap magnetic flux by finite element method in saturated induction motors
10.1007/s13198-013-0164-7 · 2013 · External reference
A review of lithium-ion battery state of charge estimation and management system in electric vehicle applications: Challenges and recommendations
10.1016/j.rser.2017.05.001 · 2017 · External reference
State-of-charge estimation of the lithium-ion battery using an adaptive extended kalman filter based on an improved thevenin model
10.1109/tvt.2011.2132812 · 2011 · External reference
A method of state-of-charge estimation for EV power lithium-ion battery using a novel adaptive extended kalman filter
10.1109/tvt.2020.3032201 · 2020 · External reference
A failure modes, mechanisms, and effects analysis (FMMEA) of lithium-ion batteries
10.1016/j.jpowsour.2015.07.100 · 2015 · External reference
Plastics recycling: challenges and opportunities
10.1098/rstb.2008.0311 · 2009 · External reference
State of Charge Estimation for Lithium-Ion Batteries Using Model-Based and Data-Driven Methods: A Review
10.1109/access.2019.2942213 · 2019 · External reference
Unresolved reference
External reference
Advanced fault diagnosis for lithium-ion battery systems: A review of fault mechanisms, fault features, and diagnosis procedures
10.1109/mie.2020.2964814 · 2020 · External reference
A review of the internal short circuit mechanism in lithium-ion batteries: Inducement, detection and prevention
10.1002/er.6920 · 2021 · External reference
Thermal runaway behavior during overcharge for large-format Lithium-ion batteries with different packaging patterns
10.1016/j.est.2019.100811 · 2019 · External reference
A simulation model for assessing the potential of remanufacturing electric vehicle batteries as spare parts
10.1016/j.jclepro.2022.132225 · 2022 · External reference
Unresolved reference
External reference
Unresolved reference
External reference
Automatic gear and bearing fault localization using vibration and acoustic signals
10.1016/j.apacoust.2015.04.016 · 2015 · External reference
Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A review
10.1016/j.hydromet.2012.11.012 · 2013 · External reference
Unresolved reference
External reference
Online multi-fault detection and diagnosis for battery packs in electric vehicles
10.1016/j.apenergy.2019.114170 · 2020 · External reference
Fault Detection and Diagnosis of the Electric Motor Drive and Battery System of Electric Vehicles
10.3390/machines11070713 · 2023 · External reference
Fault diagnostic system for a multilevel inverter using a neural network
10.1109/tpel.2007.897128 · 2007 · External reference
Induction motor fault diagnosis based on neuropredictors and wavelet signal processing
10.1109/tmech.2002.1011258 · 2002 · External reference
Fault model and performance evaluation of an inverter-fed permanent magnet synchronous motor under winding shorted turn and inverter switch open
10.1049/iet-epa.2009.0183 · 2010 · External reference
Comparison of the fault characteristics of IPM-type and SPM-type BLDC motors under inter-turn faults conditions using winding function theory
2012 · External reference
A Taxonomy of Robot Autonomy for Human-Robot Interaction
2024 · External reference
End of Electric Vehicle Batteries: Reuse vs
10.3390/en14082217 · 2021 · External reference
Advances in Batteries, Battery Modeling, Battery Management System, Battery Thermal Management, SOC, SOH, and Charge/Discharge Characteristics in EV Applications
10.1109/access.2023.3318121 · 2023 · External reference
Supervised process monitoring and fault diagnosis based on machine learning methods
10.1007/s00170-019-03306-z · 2019 · External reference
Mechanism, modeling, detection, and prevention of the internal short circuit in lithium-ion batteries: Recent advances and perspectives
10.1016/j.ensm.2020.11.026 · 2021 · External reference
Online detection of early stage internal short circuits in series-connected lithium-ion battery packs based on state-of-charge correlation
10.1016/j.est.2020.101514 · 2020 · External reference
Artificial intelligence-based technique for fault detection and diagnosis of EV motors: A review
10.1109/tte.2021.3110318 · 2022 · External reference
Battery management system hardware concepts: An overview
10.3390/app8040534 · 2018 · External reference
SOH estimation method for lithium-ion battery packs under real-world operating conditions based on a new attenuated model without additional experiments
10.1016/j.energy.2025.136802 · 2025 · External reference
An experimental robotic cell for the disassembly of electric vehicle battery modules
10.1007/s13243-025-00156-9 · 2025 · External reference
Robotic disassembly of permanent magnet electric motors
10.1098/rsos.241590 · 2025 · External reference
Human robot interaction (HRI): An artificial cognitive autonomy approach to enhance Decision-Making
10.1016/j.cogsys.2025.101336 · 2025 · External reference
A review of SOH estimation methods in lithium-ion batteries for electric vehicle applications
10.1016/j.egypro.2015.07.199 · 2015 · External reference
Failure study of commercial LiFePO4 cells in over-discharge conditions using electrochemical impedance spectroscopy
10.1149/2.090404jes · 2014 · External reference
Model-based sensor fault diagnosis of a lithium-ion battery in electric vehicles
10.3390/en8076509 · 2015 · External reference
State of the art review of inspection technologies for condition assessment of water pipes
10.1016/j.measurement.2012.05.032 · 2013 · External reference
Development of a battery real-time state of health diagnosis based on fast impedance measurements
10.1016/j.est.2021.102566 · 2021 · External reference
Failure modes and mechanisms for rechargeable Lithium-based batteries: a state-of-the-art review
10.1007/s00707-018-2327-8 · 2019 · External reference
A transfer learning-based method for personalized state of health estimation of lithium-ion batteries
10.1109/tnnls.2022.3176925 · 2024 · External reference
Electric car battery life: Everything you need to know, including how long they last [WWW Document]
2026 · External reference
Rotor fault condition monitoring techniques for squirrel-cage induction machine—A review
10.1016/j.ymssp.2011.05.007 · 2011 · External reference
A neural network-based model for MCSA of inter-turn short-circuit faults in induction motors and its power hardware in the loop simulation
10.1016/j.compeleceng.2021.107234 · 2021 · External reference
The generation, composition, collection, treatment and disposal system, and impact of E-waste
2016 · External reference
Unresolved reference
2014 · External reference
ANN based fault diagnosis of permanent magnet synchronous motor under stator winding shorted turn
10.1016/j.epsr.2015.03.024 · 2015 · External reference
Environmental impacts, pollution sources and pathways of spent lithium-ion batteries
10.1039/d1ee00691f · 2021 · External reference
Condition monitoring and fault diagnosis of electrical motors—A review
10.1109/tec.2005.847955 · 2005 · External reference
Role of artificial intelligence in rotor fault diagnosis: a comprehensive review
10.1007/s10462-020-09910-w · 2021 · External reference
Enhanced coulomb counting method for estimating state-of-charge and state-of-health of lithium-ion batteries
10.1016/j.apenergy.2008.11.021 · 2009 · External reference
Motor fault diagnostics based on current signatures: A review
2023 · External reference
Experimental comparison of vibration and acoustic emission signal analysis using kurtosis-based methods for induction motor bearing condition monitoring
10.15199/48.2016.11.51 · 2016 · External reference
Investigation of a commercial lithium-ion battery under overcharge/over-discharge failure conditions
10.1039/c8ra05564e · 2018 · External reference
Internal short circuit detection for battery pack using equivalent parameter and consistency method
10.1016/j.jpowsour.2015.06.087 · 2015 · External reference
Circular economy practices in the waste electrical and electronic equipment (WEEE) industry: A systematic review and future research agendas
10.1016/j.jclepro.2022.132671 · 2022 · External reference
Long-range battery state-of-health and end-of-life prediction with neural networks and feature engineering
10.1016/j.apenergy.2023.121761 · 2023 · External reference
Real-time modeling of static, dynamic and mixed eccentricity in permanent magnet synchronous machines
10.3390/machines13020120 · 2025 · External reference
Environmental impact of the second life of an automotive battery: Reuse and repurpose based on ageing tests
10.1016/j.jclepro.2022.132872 · 2022 · External reference
Unresolved reference
2017 · External reference
Battery management strategies: An essential review for battery state of health monitoring techniques
10.1016/j.est.2022.104427 · 2022 · External reference
Damage mechanics approach for bearing lifetime prognostics
10.1006/mssp.2002.1483 · 2002 · External reference
Economic analysis of the disassembling activities to the reuse of electric vehicles Li-ion batteries
10.1016/j.resconrec.2020.104785 · 2020 · External reference
Deep learning-based fault diagnosis of servo motor bearing using the attention-guided feature aggregation network
10.1016/j.eswa.2024.125137 · 2024 · External reference
Investigation of lithium plating-stripping process in Li-Ion batteries at low temperature using an electrochemical model
10.1149/2.0661810jes · 2018 · External reference
Remaining useful life prediction for lithium-ion battery: A deep learning approach
10.1109/access.2018.2858856 · 2018 · External reference
Review and recent advances in battery health monitoring and prognostics technologies for electric vehicle (EV) safety and mobility
10.1016/j.jpowsour.2014.01.085 · 2014 · External reference
Impact of cell size and format on external short circuit behavior of lithium-ion cells at varying cooling conditions: modeling and simulation
10.1149/2.0112001jes · 2020 · External reference
A review on fault detection and diagnosis of industrial robots and multi-axis machines
10.1016/j.rineng.2024.102397 · 2024 · External reference
Wind turbine high-speed shaft bearings health prognosis through a spectral Kurtosis-derived indices and SVR
10.1016/j.apacoust.2017.01.005 · 2017 · External reference
Machine learning-based data-driven fault detection/diagnosis of lithium-ion battery: A critical review
10.3390/electronics10111309 · 2021 · External reference
Challenges and opportunities of deep learning models for machinery fault detection and diagnosis: A review
10.1109/access.2019.2938227 · 2019 · External reference
Quantifying EV battery end-of-life through analysis of travel needs with vehicle powertrain models
10.1016/j.jpowsour.2015.01.072 · 2015 · External reference
Data-driven prediction of battery cycle life before capacity degradation
10.1038/s41560-019-0356-8 · 2019 · External reference
A review to diagnose faults related to three-phase industrial induction motors
10.1007/s11668-022-01445-2 · 2022 · External reference
Human and computer control of undersea teleoperators: Defense technical information center
1978 · External reference
Overview of model-based online state-of-charge estimation using Kalman filter family for lithium-ion batteries
10.1016/j.rser.2019.06.040 · 2019 · External reference
a review of stator fault monitoring techniques of induction motors
10.1109/tec.2004.837304 · 2005 · External reference
Adaptive nonlinear model-based fault diagnosis of li-ion batteries
10.1109/tie.2014.2336599 · 2015 · External reference
Motor current signature analysis for bearing fault detection in mechanical systems
10.1016/j.mspro.2014.07.021 · 2014 · External reference
Detection of permanent magnet damage of PMSM drive based on direct analysis of the stator phase currents using convolutional neural network
10.1109/tie.2022.3146557 · 2022 · External reference
A PCA and two-stage bayesian sensor fusion approach for diagnosing electrical and mechanical faults in induction motors
10.1109/tie.2019.2891453 · 2019 · External reference
Effect of number of features on classification of roller bearing faults using SVM and PSVM
10.1016/j.eswa.2010.09.072 · 2011 · External reference
A review of battery fires in electric vehicles
10.1007/s10694-019-00944-3 · 2020 · External reference
Adjustable-speed drive bearing-fault detection via wavelet packet decomposition
10.1109/tim.2009.2016292 · 2009 · External reference
Lithium-ion battery health estimation with real-world data for electric vehicles
10.1016/j.energy.2023.126855 · 2023 · External reference
A review of circular economy research for electric motors and the role of industry 4.0 technologies
10.3390/su13179668 · 2021 · External reference
Sensor fault detection and isolation for degrading lithium-ion batteries in electric vehicles using parameter estimation with recursive least squares
10.3390/batteries6010001 · 2019 · External reference
A review of lithium-ion battery fault diagnostic algorithms: current progress and future challenges
10.3390/a13030062 · 2020 · External reference
A comprehensive equivalent circuit model for lithium-ion batteries, incorporating the effects of state of health, state of charge, and temperature on model parameters
10.1016/j.est.2021.103252 · 2021 · External reference
Induction motor condition monitoring: Vibration analysis technique - A practical implementation
2011 · External reference
Aqueous metal recovery techniques from e-scrap: Hydrometallurgy in recycling
10.1016/j.mineng.2011.09.019 · 2012 · External reference
Online current and vibration signal monitoring based fault detection of bowed rotor induction motor
2015 · External reference
Disassembly of electric vehicle batteries using the example of the audi Q5 hybrid system
10.1016/j.procir.2014.10.098 · 2014 · External reference
A review on battery thermal management in electric vehicle application
10.1016/j.jpowsour.2017.09.046 · 2017 · External reference
Sensor fault diagnosis and system reconfiguration approach for an electric traction PWM rectifier based on sliding mode observer
10.1109/tia.2017.2715816 · 2017 · External reference
Critical Review on the Battery State of Charge Estimation Methods for Electric Vehicles
10.1109/access.2017.2780258 · 2018 · External reference
Towards a smarter battery management system: A critical review on battery state of health monitoring methods
10.1016/j.jpowsour.2018.10.019 · 2018 · External reference
Towards autonomous supply chains: Definition, characteristics, conceptual framework, and autonomy levels
2024 · External reference
A materials perspective on direct recycling of lithium-ion batteries: principles
2023 · External reference
Imbalanced fault diagnosis of rotating machinery via multi-domain feature extraction and cost-sensitive learning
10.1007/s10845-019-01522-8 · 2020 · External reference
Variable speed induction motors’ fault detection based on transient motor current signatures analysis: A review
10.1016/j.ymssp.2022.109737 · 2023 · External reference
Unresolved reference
External reference
On-board soft short circuit fault diagnosis of lithium-ion battery packs for electric vehicles using extended Kalman filter
2020 · External reference
Characterization of external short circuit faults in electric vehicle Li-ion battery packs and prediction using artificial neural networks
10.1016/j.apenergy.2019.114253 · 2020 · External reference
Enabling future closed-loop recycling of spent lithium-ion batteries: direct cathode regeneration
10.1002/adma.202370259 · 2023 · External reference
A review of lithium-ion battery state of health estimation and prediction methods
10.3390/wevj12030113 · 2021 · External reference
Innovative fault diagnosis and early warning method based on multifeature fusion model for electric vehicles
10.1016/j.est.2023.109681 · 2024 · External reference
Overcharge failure investigation of lithium-ion batteries
10.1016/j.electacta.2015.07.147 · 2015 · External reference
Metallurgical and mechanical methods for recycling of lithium-ion battery pack for electric vehicles
10.1016/j.resconrec.2018.04.025 · 2018 · External reference
A generalized SOC-OCV model for lithium-ion batteries and the SOC Estimation for LNMCO Battery
10.3390/en9110900 · 2016 · External reference
Decoding battery aging in fast-charging electric vehicles: An advanced SOH estimation framework using real-world field data
2025 · External reference
Artificial intelligence technique-based EV powertrain condition monitoring and fault diagnosis: A Review
10.1109/jsen.2023.3285531 · 2023 · External reference
Battery safety: Fault diagnosis from laboratory to real world
10.1016/j.jpowsour.2024.234111 · 2024 · External reference
Influence of over-discharge on the lifetime and performance of LiFePO4 /graphite batteries
10.1039/c6ra01677d · 2016 · External reference
Decision and coordination of WEEE closed-loop supply chain with risk aversion under the cap-and-trade regulation
10.1016/j.ijpe.2024.109477 · 2025 · External reference
