Research graph
References from Time-controlled 3D printing of high-ductility cementitious composites with circumferential printing path for coating of prestressed concrete cylinder pipe. Local targets link to admitted publications; unresolved targets remain external evidence.
Effect of the location of broken wires on prestressed concrete cylinder pipes under working pressure
10.3390/coatings12091361 · 2022 · External reference
Failure analysis, condition assessment technologies, and performance prediction of prestressed-concrete cylinder pipe: state-of-the-art literature review
10.1061/(asce)cf.1943-5509.0000424 · 2014 · External reference
Mechanical behavior of prestressed concrete cylinder pipe strengthened by prestressed CFRP subject to secondary load
10.1177/13694332251325107 · 2025 · External reference
Review of influencing factors of prestressed concrete cylinder pipe durability
2025 · External reference
Experimental study on the mechanical properties and durability of high-performance concrete for jacking prestressed concrete cylinder pipe
10.1016/j.conbuildmat.2025.144163 · 2025 · External reference
Using EPS and CFRP liner to strengthen prestressed concrete cylinder pipe
2024 · External reference
Load response law and failure mechanism of buried prestressed concrete cylinder pipe with corroded prestressed steel wires
10.1016/j.tust.2025.106906 · 2025 · External reference
Monitoring the circumferential cracking of inner concrete core in prestressed concrete cylinder pipe during wire-wrapping using distributed optical fiber sensors
10.1016/j.tust.2024.106330 · 2025 · External reference
Investigating the impact of steam curing parameters on the chloride ion penetration resistance of the prestressed concrete cylinder pipe (PCCP) protective layer
2024 · External reference
Effects of prestressing wire corrosion on the load response law and bearing capacity of PCCP
10.1016/j.compstruct.2024.117933 · 2024 · External reference
Experimental and numerical study on CFRP-lined prestressed concrete cylinder pipe under internal pressure
10.1016/j.engstruct.2019.03.106 · 2019 · External reference
Numerical investigations into the failure mode of buried prestressed concrete cylinder pipes under differential settlement [J]
10.1016/j.engfailanal.2020.104492 · 2020 · External reference
Micromechanics theory guidelines and method exploration for surface treatment of PVA fibers used in high-ductility cementitious composites
10.1016/j.conbuildmat.2018.11.118 · 2019 · External reference
Mechanical performance of Strain-Hardening Cementitious Composites (SHCC) with hybrid polyvinyl alcohol and steel fibers
10.1016/j.compstruct.2019.111198 · 2019 · External reference
Micromechanical Insights into High-Ductility Geopolymer Composites Incorporating Red Mud (RM): role of in situ spherical rm-balls at the fiber-matrix interface
2025 · External reference
Engineering low clinker Strain-Hardening cementitious composites (SHCC) using polyethylene and cost-effective polypropylene fibers: an experimental scale-linking analysis
2025 · External reference
Unresolved reference
2019 · External reference
From micromechanics to structural engineering-the design of cementitious composites for civil engineering applications
1993 · External reference
Micromechanical design based on microscale fiber/matrix interactions for single PE fiber pullout [J]
10.1016/j.conbuildmat.2024.135117 · 2024 · External reference
Effects of interlayer notch and shear stress on interlayer strength of 3D printed cement paste
2020 · External reference
A three-step development strategy for 3D printable concrete containing coarse aggregates
2025 · External reference
Sustainable 3D Printable Concrete mix using copper slag
2025 · External reference
A comparative study on the effectiveness of fly ash and blast furnace slag as partial cement substitution in 3D printable concrete
2025 · External reference
Fresh and strength properties of 3D printable concrete mixtures utilising a high volume of sustainable alternative binders
10.1016/j.conbuildmat.2024.135474 · 2024 · External reference
Advancing 3D Printable Concrete with Nanoclays: Rheological and Mechanical Insights for Construction Applications
10.3390/jcs9080449 · 2025 · External reference
Effect of silica fume utilization on structural build-up, mechanical and dimensional stability performance of fiber-reinforced 3d printable concrete
10.3390/polym16040556 · 2024 · External reference
Rheology of 3D printable concrete prepared by secondary mixing of ready-mix concrete
10.1016/j.cemconcomp.2023.104958 · 2023 · External reference
Printability region for 3D-printable engineered cementitious composites (3DP-ECC) [J]
10.1016/j.cemconcomp.2024.105599 · 2024 · External reference
Digital design computing and modelling for 3-D concrete printing [J]
2021 · External reference
3D concrete printing modelling of thin-walled structures
10.1016/j.istruc.2022.03.049 · 2022 · External reference
Modelling of 3D concrete printing process: a perspective on material and structural simulations
2023 · External reference
Upcycling red mud into high-strength high-ductility Engineered Geopolymer Composites (EGC): Toward superior performance and sustainability
10.1016/j.compositesb.2025.112713 · 2025 · External reference
Beyond performance-cost trade-off: engineered Geopolymer Composites (EGC) incorporating ultra-high-volume coal gangue wastes
10.1016/j.jclepro.2026.148729 · 2026 · External reference
Mixed-mode interfacial fracture behavior of ultra-thin overlay system with high-strength ECC: Kinking-and-trapping mechanism [J]
10.1016/j.conbuildmat.2026.146895 · 2026 · External reference
Performance of lightweight, reinforced, and assemblable 3D-printed concrete columns with low-carbon engineered cementitious composites
2026 · External reference
Experimental and multi-scale modelling investigation of printable, low-cement engineered cementitious composites with different Polyethene fibre contents
2026 · External reference
Extended finite element multiscale modelling for crack propagation in 3D-printed fibre-reinforced concrete
2024 · External reference
Modelling of 3D-printed bio-inspired Bouligand cementitious structures reinforced with steel fibres
2023 · External reference
Unresolved reference
2009 · External reference
Unresolved reference
External reference
Experimental method for mechanical properties of high ductility fiber reinforced cementitious composites
2018 · External reference
ASTM C6109
2013 · External reference
Unresolved reference
2019 · External reference
Influence of printing parameters on 3D printing engineered cementitious composites (3DP-ECC)
10.1016/j.cemconcomp.2022.104562 · 2022 · External reference
Time-dependent fresh properties characterization of 3D printing engineered cementitious composites (3DP-ECC): on the evaluation of buildability
10.1016/j.cemconcomp.2022.104704 · 2022 · External reference
Interlayer bonding strength and pore characteristics of 3D printed engineered cementitious composites (ECC) [J]
2024 · External reference
Pressure test of a prestressed concrete cylinder pipe using distributed fiber optic sensors: Instrumentation and results
10.1016/j.engstruct.2022.114835 · 2022 · External reference
Interfacial bond properties between 3D printed engineered cementitious composite (ECC) and post-cast concrete
10.1016/j.cemconcomp.2024.105897 · 2025 · External reference
Experimental study on the influence of scattered broken wires on the structural performance of prestressed concrete cylinder pipe
10.1016/j.istruc.2022.11.055 · 2022 · External reference
A review of recent advances in the science and technology of seawater-mixed concrete
10.1016/j.cemconres.2021.106666 · 2022 · External reference
Fracture properties and micro-pore structure of cementitious composite
2011 · External reference
Serviceability assessment of prestressed concrete cylinder pipes with broken wires: Analytical solution and numerical simulation [J]
10.1016/j.tust.2022.104551 · 2022 · External reference
Bending strength of connection joints of prestressed reinforced concrete pipe piles
10.3390/buildings13010119 · 2023 · External reference
Use of numerical methods for identifying the number of wire breaks in prestressed concrete cylinder pipe by piezoelectric sensing technology
10.1016/j.conbuildmat.2020.121207 · 2021 · External reference
Micromechanics theory guidelines and method exploration for surface treatment of PVA fibers used in high-ductility cementitious composites
10.1016/j.conbuildmat.2018.11.118 · 2019 · External reference
Unresolved reference
2019 · External reference
Experimental investigation and prediction of post-high-temperature mechanical properties of ultra-high-performance concrete (UHPC) with polypropylene (PP) fibers and bauxite coarse aggregates
2025 · External reference
Micromechanical design based on microscale fiber/matrix interactions for single PE fiber pullout
10.1016/j.conbuildmat.2024.135117 · 2024 · External reference
Analysis of freeze-thaw damage and pore structure deterioration of mortar by low-field NMR
10.1016/j.conbuildmat.2021.126097 · 2022 · External reference
Preparation and properties of engineered cementitious composites incorporating a high volume of fly ash
10.1177/0361198120919406 · 2020 · External reference
Fracture properties and micro-pore structure of cementitious composite
2011 · External reference
Correlation between macroscopic properties and microscopic pore structure in steel-basalt hybrid fibers reinforced cementitious composites subjected to elevated temperature
10.1016/j.conbuildmat.2022.129988 · 2023 · External reference
Influence of precast foam on the pore structure and properties of fly ash-based geopolymer foams
10.1016/j.conbuildmat.2020.119410 · 2020 · External reference
Experimental study on external loading performance of large diameter prestressed concrete cylinder pipe
10.3390/buildings12101740 · 2022 · External reference
Influence of printing parameters on 3D printing engineered cementitious composites (3DP-ECC)
10.1016/j.cemconcomp.2022.104562 · ExternalCitation · doi-reference
Time-dependent fresh properties characterization of 3D printing engineered cementitious composites (3DP-ECC): on the evaluation of buildability
10.1016/j.cemconcomp.2022.104704 · ExternalCitation · doi-reference
Rheology of 3D printable concrete prepared by secondary mixing of ready-mix concrete
10.1016/j.cemconcomp.2023.104958 · ExternalCitation · doi-reference
Printability region for 3D-printable engineered cementitious composites (3DP-ECC) [J]
10.1016/j.cemconcomp.2024.105599 · ExternalCitation · doi-reference
Interfacial bond properties between 3D printed engineered cementitious composite (ECC) and post-cast concrete
10.1016/j.cemconcomp.2024.105897 · ExternalCitation · doi-reference
A review of recent advances in the science and technology of seawater-mixed concrete
10.1016/j.cemconres.2021.106666 · ExternalCitation · doi-reference
Upcycling red mud into high-strength high-ductility Engineered Geopolymer Composites (EGC): Toward superior performance and sustainability
10.1016/j.compositesb.2025.112713 · ExternalCitation · doi-reference
Mechanical performance of Strain-Hardening Cementitious Composites (SHCC) with hybrid polyvinyl alcohol and steel fibers
10.1016/j.compstruct.2019.111198 · ExternalCitation · doi-reference
Effects of prestressing wire corrosion on the load response law and bearing capacity of PCCP
10.1016/j.compstruct.2024.117933 · ExternalCitation · doi-reference
Micromechanics theory guidelines and method exploration for surface treatment of PVA fibers used in high-ductility cementitious composites
10.1016/j.conbuildmat.2018.11.118 · ExternalCitation · doi-reference
Influence of precast foam on the pore structure and properties of fly ash-based geopolymer foams
10.1016/j.conbuildmat.2020.119410 · ExternalCitation · doi-reference
Use of numerical methods for identifying the number of wire breaks in prestressed concrete cylinder pipe by piezoelectric sensing technology
10.1016/j.conbuildmat.2020.121207 · ExternalCitation · doi-reference
Analysis of freeze-thaw damage and pore structure deterioration of mortar by low-field NMR
10.1016/j.conbuildmat.2021.126097 · ExternalCitation · doi-reference
Correlation between macroscopic properties and microscopic pore structure in steel-basalt hybrid fibers reinforced cementitious composites subjected to elevated temperature
10.1016/j.conbuildmat.2022.129988 · ExternalCitation · doi-reference
Micromechanical design based on microscale fiber/matrix interactions for single PE fiber pullout
10.1016/j.conbuildmat.2024.135117 · ExternalCitation · doi-reference
Fresh and strength properties of 3D printable concrete mixtures utilising a high volume of sustainable alternative binders
10.1016/j.conbuildmat.2024.135474 · ExternalCitation · doi-reference
Experimental study on the mechanical properties and durability of high-performance concrete for jacking prestressed concrete cylinder pipe
10.1016/j.conbuildmat.2025.144163 · ExternalCitation · doi-reference
Mixed-mode interfacial fracture behavior of ultra-thin overlay system with high-strength ECC: Kinking-and-trapping mechanism [J]
10.1016/j.conbuildmat.2026.146895 · ExternalCitation · doi-reference
Numerical investigations into the failure mode of buried prestressed concrete cylinder pipes under differential settlement [J]
10.1016/j.engfailanal.2020.104492 · ExternalCitation · doi-reference
Experimental and numerical study on CFRP-lined prestressed concrete cylinder pipe under internal pressure
10.1016/j.engstruct.2019.03.106 · ExternalCitation · doi-reference
Pressure test of a prestressed concrete cylinder pipe using distributed fiber optic sensors: Instrumentation and results
10.1016/j.engstruct.2022.114835 · ExternalCitation · doi-reference
3D concrete printing modelling of thin-walled structures
10.1016/j.istruc.2022.03.049 · ExternalCitation · doi-reference
Experimental study on the influence of scattered broken wires on the structural performance of prestressed concrete cylinder pipe
10.1016/j.istruc.2022.11.055 · ExternalCitation · doi-reference
Beyond performance-cost trade-off: engineered Geopolymer Composites (EGC) incorporating ultra-high-volume coal gangue wastes
10.1016/j.jclepro.2026.148729 · ExternalCitation · doi-reference
Serviceability assessment of prestressed concrete cylinder pipes with broken wires: Analytical solution and numerical simulation [J]
10.1016/j.tust.2022.104551 · ExternalCitation · doi-reference
Monitoring the circumferential cracking of inner concrete core in prestressed concrete cylinder pipe during wire-wrapping using distributed optical fiber sensors
10.1016/j.tust.2024.106330 · ExternalCitation · doi-reference
Load response law and failure mechanism of buried prestressed concrete cylinder pipe with corroded prestressed steel wires
10.1016/j.tust.2025.106906 · ExternalCitation · doi-reference
Failure analysis, condition assessment technologies, and performance prediction of prestressed-concrete cylinder pipe: state-of-the-art literature review
10.1061/(asce)cf.1943-5509.0000424 · ExternalCitation · doi-reference
Preparation and properties of engineered cementitious composites incorporating a high volume of fly ash
10.1177/0361198120919406 · ExternalCitation · doi-reference
Mechanical behavior of prestressed concrete cylinder pipe strengthened by prestressed CFRP subject to secondary load
10.1177/13694332251325107 · ExternalCitation · doi-reference
Experimental study on external loading performance of large diameter prestressed concrete cylinder pipe
10.3390/buildings12101740 · ExternalCitation · doi-reference
Bending strength of connection joints of prestressed reinforced concrete pipe piles
10.3390/buildings13010119 · ExternalCitation · doi-reference
Effect of the location of broken wires on prestressed concrete cylinder pipes under working pressure
10.3390/coatings12091361 · ExternalCitation · doi-reference
Advancing 3D Printable Concrete with Nanoclays: Rheological and Mechanical Insights for Construction Applications
10.3390/jcs9080449 · ExternalCitation · doi-reference
Effect of silica fume utilization on structural build-up, mechanical and dimensional stability performance of fiber-reinforced 3d printable concrete
10.3390/polym16040556 · ExternalCitation · doi-reference
