References

Efficacy of CAD/CAM technology in dental procedures performed by students: a systematic scoping review of randomized clinical trials

2023 · External reference

Contemporary evidence of CAD-CAM in dentistry: a systematic review

2022 · External reference

A review of dental CAD/CAM: current status and future perspectives from 20 years of experience

10.4012/dmj.28.44 · 2009 · External reference

Clinical applications and mechanical properties of CAD-CAM materials in restorative and prosthetic dentistry: a systematic review

10.3390/jfb14080431 · 2023 · External reference

Influence of CAD-CAM milling strategies on the outcome of indirect restorations: a scoping review

10.1016/j.prosdent.2024.02.021 · 2024 · External reference

Randomized controlled clinical trial of digital and conventional workflows for the fabrication of zirconia-ceramic posterior fixed partial dentures. part ii: time efficiency of cad-cam versus conventional laboratory procedures

10.1016/j.prosdent.2018.04.020 · 2019 · External reference

A comparative study of additive and subtractive manufacturing techniques for a zirconia dental product: an analysis of the manufacturing accuracy and the bond strength of porcelain to zirconia

10.3390/ma15155398 · 2022 · External reference

Performance study of cryo-treated end mill via wet, cryogenic, and hybrid lubri-coolant-milling induced surface integrity of biocompatible mg alloy az91d

10.1177/09544062211017160 · 2021 · External reference

A simple solution to recycle and reuse dental cad/cam zirconia block from its waste residuals

10.2186/jpr.jpr_d_20_00002 · 2021 · External reference

Current prospect of dental zirconia recycling: a scoping review

10.2186/jpr.jpr_d_23_00186 · 2024 · External reference

Chairside CAD/CAM restorations

2024 · External reference

Trueness of the inner surface of monolithic crowns fabricated by milling of a fully sintered (Y, NB)-TZP block in chairside CAD-CAM system for single-visit dentistry

10.3390/ma12193253 · 2019 · External reference

CAD/CAM technology challenges in prosthodontics

2021 · External reference

Full digital workflow in fixed adhesive dental prosthesis: description of a clinical technique

2021 · External reference

Clinical performance of chairside CAD/CAM restorations

10.14219/jada.archive.2006.0395 · 2006 · External reference

Survival probability of zirconia-based fixed dental prostheses up to 5 yr: a systematic review of the literature

10.1111/j.1600-0722.2010.00767.x · 2010 · External reference

Zirconia in fixed implant prosthodontics

10.1111/j.1708-8208.2010.00317.x · 2012 · External reference

Computer-aided design/computer-aided manufacturing of customized abutment for rehabilitating a malpositioned implant using digital flow: a case report

10.3390/healthcare11182472 · 2023 · External reference

Intraoral scanning to fabricate complete dentures with functional borders: a proof-of-concept case report

10.1186/s12903-019-0733-5 · 2019 · External reference

Comparative evaluation of the digital workflow and conventional method in manufacturing complete removal prostheses

10.3390/ma16216955 · 2023 · External reference

Fit of cobalt-chromium implant frameworks before and after ceramic veneering in comparison with CNC-milled titanium frameworks

10.1002/cre2.9 · 2015 · External reference

Adhesion of dental porcelain to cast, milled, and laser-sintered cobalt-chromium alloys: shear bond strength and sensitivity to thermocycling

10.1016/j.prosdent.2014.01.004 · 2014 · External reference

Mechanical properties of cobalt-chromium 3-unit fixed dental prostheses fabricated by casting, milling, and additive manufacturing

10.1016/j.prosdent.2017.12.007 · 2018 · External reference

Mechanical properties of 3D-printed and milled composite resins for definitive restorations: an in vitro comparison of initial strength and fatigue behavior

10.1111/jerd.13132 · 2024 · External reference

Engineering studies on recycling of hatchery by-product wastes to produce untraditional poultry feeds

10.21608/zjar.2019.47081 · 2019 · External reference

Surface roughness in ultrasonic-assisted and conventional milling of soda-lime glass

2019 · External reference

Physicomechanical properties of raw and comminuted pine and poplar shavings: energy consumption, particle size distribution and flow properties

10.1007/s00226-023-01466-6 · 2023 · External reference

Experimental investigation of machinability parameters in high-speed micro-end milling of titanium (grade-2)

10.1007/s00170-015-7443-1 · 2016 · External reference

Vibration assisted conventional and advanced machining: a review

10.1016/j.proeng.2014.12.441 · 2014 · External reference

A study on the machining characteristics of curved workpiece using laser-assisted milling with different tool paths in Inconel 718

10.3390/met8110968 · 2018 · External reference

The effect of abrading and cutting instruments on machinability of dental ceramics

10.1007/s10856-018-6031-y · 2018 · External reference

Brittleness index of machinable dental materials and its relation to the marginal chipping factor

10.1016/j.jdent.2007.07.002 · 2007 · External reference

Dentistry 4.0 concept in the design and manufacturing of prosthetic dental restorations

10.3390/pr8050525 · 2020 · External reference

Trueness of four different milling procedures used in dental CAD/CAM systems

10.1007/s00784-016-1916-y · 2017 · External reference

The effect of spindle speed, feed-rate and machining time to the surface roughness and burr formation of Aluminum Alloy 1100 in micro-milling operation

10.1016/j.jmapro.2014.05.003 · 2014 · External reference

Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method

2011 · External reference

The complete digital workflow in fixed prosthodontics updated: a systematic review

10.3390/healthcare11050679 · 2023 · External reference

Unresolved reference

2017 · External reference

Impact of maintenance on machine reliability: a review

10.1051/e3sconf/202343001226 · 2023 · External reference

The Cerec system: computer-assisted preparation of direct ceramic inlays in 1 setting

1987 · External reference

Accuracy evaluation of dental models manufactured by CAD/CAM milling method and 3D printing method

10.4047/jap.2018.10.3.245 · 2018 · External reference

Accuracy of 3d printing versus milling in fabrication of clear aligners dental models

10.21608/ajdsm.2023.189711.1416 · 2023 · External reference

Experimental study regarding the behavior at different pH of two types of co-cr alloys used for prosthetic restorations

10.3390/ma14164635 · 2021 · External reference

Scientific update on nanoparticles in dentistry

10.1111/idj.12394 · 2018 · External reference

Effect of different CAD/CAM milling and 3D printing digital fabrication techniques on the accuracy of PMMA working models and vertical marginal fit of PMMA provisional dental prosthesis: an in vitro study

10.3390/polym14071285 · 2022 · External reference

Comparison between additive and subtractive cad-cam technique to produce orthognathic surgical splints: a personalized approach

10.3390/jpm10040273 · 2020 · External reference

Accuracy of 3-dimensional printed dental models reconstructed from digital intraoral impressions

10.1016/j.ajodo.2018.06.009 · 2018 · External reference

Accuracy of 3-dimensionally printed full-arch dental models: a systematic review

10.3390/jcm9103357 · 2020 · External reference

The estimation of cement film thickness by an in vivo technique

10.1038/sj.bdj.4802708 · 1971 · External reference

Marginal adaptation and CAD-CAM technology: a systematic review of restorative material and fabrication techniques

10.1016/j.prosdent.2017.07.001 · 2018 · External reference

Micro-CT evaluation of the marginal fit of different In-Ceram alumina copings

2009 · External reference

Evaluation of marginal and internal fit of ceramic crown copings

10.1016/j.dental.2012.10.012 · 2013 · External reference

Marginal and internal fit of all-ceramic CAD-CAM crown-copings on chamfer preparations

10.1111/j.1365-2842.2005.01446.x · 2005 · External reference

"Digitally oriented materials": focus on lithium disilicate ceramics

10.1155/2016/9840594 · 2016 · External reference

3D and 2D marginal fit of pressed and CAD/CAM lithium disilicate crowns made from digital and conventional impressions

10.1111/jopr.12180 · 2014 · External reference

Marginal and internal adaptation of ceramic crown restorations fabricated with CAD-CAM technology and the heat-pressing technique

10.1016/j.prosdent.2014.03.017 · 2014 · External reference

Marginal and internal fit of heat pressed versus CAD/CAM fabricated all-ceramic onlays after exposure to thermo-mechanical fatigue

10.1016/j.jdent.2013.10.002 · 2014 · External reference

Micro-computed tomography evaluation of marginal fit of lithium disilicate crowns fabricated by using chairside CAD/CAM systems or the heat-pressing technique

10.1016/j.prosdent.2014.04.028 · 2014 · External reference

Marginal discrepancy of monolithic and veneered all-ceramic crowns on titanium and zirconia implant abutments before and after adhesive cementation: a scanning electron microscopy analysis

10.11607/jomi.2759 · 2013 · External reference

Passivity of conventional and CAD-CAM fabricated implant frameworks

10.1590/0103-6440201300145 · 2015 · External reference

In vitro precision of fit of computer-aided design and computer-aided manufacturing titanium and zirconium dioxide bars

10.1016/j.dental.2013.07.004 · 2013 · External reference

A comparison of fit of CNC-milled titanium and zirconia frameworks to implants

10.1111/j.1708-8208.2010.00334.x · 2012 · External reference

Evaluating the accuracy of dental restorations manufactured by two CAD/CAM milling systems and their prototypes fabricated by 3D printing methods: an in vitro study

10.11607/ijp.7633 · 2023 · External reference

Influence of the CAD-CAM systems on the marginal accuracy and mechanical properties of dental restorations

10.3390/ijerph17124276 · 2020 · External reference

In vitro evaluation of marginal fit of zirconia-reinforced lithium silicate laminate veneers at two thicknesses using different cad/cam systems, Braz

2020 · External reference

The effect of two different bar materials constructed with CAD/CAM technology on implant retained mandibular overdentures: radiographic evaluation

10.21608/asdj.2022.110989.1098 · 2021 · External reference

A base-line study of the wear of burs used for chairside milling of ceramic crowns of different hardness: effect on internal fit and surface roughness

10.17159/2519-0105/2020/v75no10a1 · 2020 · External reference

Structural design and finite element analysis of a milling machine beam

2023 · External reference

Stability analysis for milling system with variable pitch cutters under variable speed

10.21595/jve.2018.20080 · 2019 · External reference

Development of a miniature vertical milling machine for automation used in a microfactory

2008 · External reference

Residual stress in disc milling grooving of titanium alloy

2017 · External reference

Spindle speed selection for high-speed milling of titanium alloy curved surface

10.1080/10426914.2014.880458 · 2014 · External reference

Optimization of cutting power and power efficiency during particleboard helical milling

10.1002/mawe.202200136 · 2023 · External reference

Effect of spindle speed and feed per tooth in feed rate perspective on Inconel hx cutting force

10.24191/jmeche.v18i2.14959 · 2021 · External reference

Prediction of thermal deformation of rotary table in multifunction machine tool using neural networks

10.18494/sam.2020.2598 · 2020 · External reference

Prediction of surface roughness in end face milling based on Gaussian process regression and cause analysis considering tool vibration

10.1007/s00170-014-6232-6 · 2014 · External reference

Geometric deviation reduction method for interpolated toolpath in five-axis flank milling of the s-shaped test piece

10.1177/0954405419889235 · 2019 · External reference

Toolpath planning for CNC machining of hub surface of blisk

10.1088/1742-6596/2336/1/012024 · 2022 · External reference

An unformed chip thickness approach to study the influence of process vibration on machining performance in milling

10.1007/s00170-022-09088-1 · 2022 · External reference

Trends in computer-aided manufacturing in prosthodontics: a review of the available streams

10.1155/2014/783948 · 2014 · External reference

Noise reduction using active vibration control methods in cad/cam dental milling machines

10.3390/app9081516 · 2019 · External reference

Application of soundproofing materials for noise reduction in dental cad/cam milling machines

10.3390/app10082768 · 2020 · External reference

Chairside versus external laboratory milling in fabricating cad/cam surgical and restorative products in dental practice, Prim

2022 · External reference

Unresolved reference

External reference

The effect of milling parameters and thermal modification on power input during the milling of thermally modified spruce and oak wood

10.15376/biores.14.1.669-687 · 2018 · External reference

Optimization of milling speed and time in mechanical alloying of ferritic ods steel through taguchi technique

10.1051/smdo/2021029 · 2021 · External reference

Fabrication and properties of dispersed carbon nanotube–aluminum composites

10.1016/j.msea.2009.01.002 · 2009 · External reference

Nanomilling of drugs for bioavailability enhancement: a holistic formulation-process perspective

10.3390/pharmaceutics8020017 · 2016 · External reference

An integrated toolpath and process parameter optimization for high-performance micro-milling process of ti–6al–4v titanium alloy

10.1007/s00170-014-6102-2 · 2014 · External reference

Remarkable characteristics of a novel path interval determination in filleted end milling

2021 · External reference

Unresolved reference

External reference

Optimization and analysis for palm oil mill operations via input-output optimization model

10.1051/matecconf/201926802006 · 2019 · External reference

Full digital workflow in fixed adhesive dental prosthesis: description of a clinical technique

2021 · External reference

Retentive force of PEEK secondary crowns on zirconia primary crowns over time, Clin

10.1007/s00784-018-2657-x · 2019 · External reference

Digital technology for fabrication of removable dental prosthesis with double crowns combining fiber-reinforced composite and zirconia

10.2186/jpr.jpr_d_22_00064 · 2022 · External reference

Comparative clinical study of the marginal discrepancy of fixed dental prosthesis fabricated by the milling-sintering method using a presintered alloy

10.4047/jap.2019.11.5.280 · 2019 · External reference

Digital vs. conventional implant prosthetic workflows: a cost/time analysis

10.1111/clr.12476 · 2015 · External reference

Effect of fabrication technique on the marginal discrepancy and resistance of lithium disilicate crowns: an in vitro study

10.1111/jopr.13014 · 2019 · External reference

Intraoral scanners in dentistry: a review of the current literature

10.1186/s12903-017-0442-x · 2017 · External reference

Time efficiency of digitally and conventionally produced single-unit restorations

10.3390/dj9060062 · 2021 · External reference

In vivo precision of conventional and digital methods for obtaining quadrant dental impressions, Clin

10.1007/s00784-015-1641-y · 2015 · External reference

Evaluation of fit and efficiency of cad/cam fabricated all-ceramic restorations based on direct and indirect digitalization: a double-blinded, randomized clinical trial

10.1007/s00784-015-1504-6 · 2015 · External reference

Optimization of different parameters related to milling tools to maximize the allowable cutting depth for chatter-free machining

10.1177/0954405420937536 · 2020 · External reference

Unresolved reference

External reference

Dynamic response analysis of a ball-end milling cutter and optimization of the machining parameters for a ruled surface

10.1177/0954405417737577 · 2017 · External reference

Automated post machining process planning for a new hybrid manufacturing method of additive manufacturing and rapid machining

10.1108/rpj-04-2017-0057 · 2018 · External reference

Unresolved reference

External reference

Scanning electron microscopy analysis of the adaptation of single-unit screw-retained computer-aided design/computer-aided manufacture abutments after mechanical cycling

10.11607/jomi.5588 · 2018 · External reference

A comparative study on machine learning algorithms for smart manufacturing: tool wear prediction using random forests

10.1115/1.4036350 · 2017 · External reference

Machine maintenance planning using the reliability centered maintenance (RCM) method at PT Perkebunan Nusantara XIV Camming Sugar Factory in bone regency

2022 · External reference

Milling force model for aviation aluminum alloy: academic insight and perspective analysis

10.1186/s10033-021-00536-9 · 2021 · External reference

Effect of the relative position of the face milling tool towards the workpiece on machined surface roughness and milling dynamics

10.3390/app9050842 · 2019 · External reference

Study of wear phenomenon of a dental milling cutter by statistical–mathematical modeling based on the experimental results

10.3390/ma15051903 · 2022 · External reference

Influence of sequential CAD/CAM milling on the fitting accuracy of titanium three-unit fixed dental prostheses

10.3390/ma14061401 · 2021 · External reference