Research graph
References from Bond strength between 3D-printed titanium and 3D-printed denture base resin: effect of different surface treatment protocols. Local targets link to admitted publications; unresolved targets remain external evidence.
Which metal surface treatment improves the bond strength between metal alloys and acrylic resin in removable partial dentures? A systematic review
10.1016/j.prosdent.2023.10.009 · 2025 · External reference
Shear bond strengths of polymethyl methacrylate to cast titanium and cobalt-chromium frameworks using five metal primers
10.1016/s0022-3913(00)70088-6 · 2000 · External reference
Minor connector designs for anterior acrylic resin bases: a preliminary study
10.1016/0022-3913(75)90035-9 · 1975 · External reference
Fatigue failure in acrylic resin retaining minor connectors
10.1016/0022-3913(87)90051-5 · 1987 · External reference
Influence of metal and resin on the finishing line of cobalt-chromium denture. Part 3. Studies on finishing line structure
1994 · External reference
The significance of adhesive denture base resin
1989 · External reference
Bond strength of 4-META acrylic resin denture base to cobalt chromium alloy
10.1016/0022-3913(88)90216-8 · 1988 · External reference
Silane to enhance the bond between polymethyl methacrylate and titanium
10.1016/s0022-3913(05)80070-8 · 1995 · External reference
The effect of a novel silane blend system on resin bond strength to silica-coated Ti substrate
10.1016/j.jdent.2005.09.007 · 2006 · External reference
Effect of drying time of 3-methacryloxypropyltrimethoxysilane on the shear bond strength of a composite resin to silica-coated base/noble alloys
10.1016/j.dental.2003.10.003 · 2004 · External reference
An introduction to silanes and their clinical applications in dentistry
2004 · External reference
Comparison of four fluoride etchants in bonding between titanium and a self-curing luting agent
10.4012/dmj.25.345 · 2006 · External reference
Spark erosion as a metal-resin bonding system
10.1016/j.dental.2006.01.009 · 2007 · External reference
Effect of surface preparation on the bond strength of heat-polymerized denture base resin to commercially pure titanium and cobalt-chromium alloy
10.4012/dmj.2010-089 · 2011 · External reference
Comparative evaluation of effect of metal primer and sandblasting on the shear bond strength between heat cured acrylic denture base resin and cobalt-chromium alloy: an in vitro study
10.4103/0976-237x.161895 · 2015 · External reference
Effect of adhesive primers on bonding strength of heat cure denture base resin to cast titanium and cobalt-chromium alloy
10.4047/jap.2009.1.1.41 · 2009 · External reference
Effectiveness of adhesive systems for a Co-Cr removable partial denture alloy
10.1111/j.1532-849x.1998.tb00171.x · 1998 · External reference
CRIS guidelines (checklist for reporting In-vitro studies): a concept note on the need for standardized guidelines for improving quality and transparency in reporting in-vitro studies in experimental dental research
10.4103/0972-0707.136338 · 2014 · External reference
Hot isostatic pressing as an alternative thermo-mechanical treatment for metallic full-arch implant-supported frameworks obtained by additive and subtractive manufacturing technology: vertical and horizontal fit, screw removal torque, and stress analysis
10.1111/jopr.13842 · 2024 · External reference
Influence of salivary pH on the surface, mechanical, physical, and cytotoxic properties of resins for 3D printed and heat-polymerized denture base
2025 · External reference
Effects of long-term cinnamaldehyde immersion on the surface roughness and color of heat-polymerized denture base resin
10.1016/j.prosdent.2022.07.002 · 2022 · External reference
Digital workflow in full-arch implant rehabilitation with segmented minimally veneered monolithic zirconia fixed dental prostheses: 2-year clinical follow-up
10.1111/jerd.12323 · 2018 · External reference
Effect of thermal cycling on the flexural strength and hardness of new generation denture base materials
10.1111/jopr.13615 · 2023 · External reference
3D printed denture base resins: glazing as an alternative to improve surface, mechanical, and microbiological properties
2024 · External reference
Effect of the incorporation of silica blow spun nanofibers containing silver nanoparticles (SiO2/Ag) on the mechanical, physicochemical, and biological properties of a low-viscosity bulk-fill composite resin
10.1016/j.dental.2021.08.012 · 2021 · External reference
The influence of polishing techniques on pre-polymerized CAD/CAM acrylic resin denture bases
10.19082/5452 · 2017 · External reference
Cast, milled and EBM-manufactured titanium, differences in porcelain shear bond strength
10.4012/dmj.2016-404 · 2018 · External reference
Influence of thermo-mechanical cycling on porcelain bonding to cobalt-chromium and titanium dental alloys fabricated by casting, milling, and selective laser melting
10.1016/j.jpor.2017.08.007 · 2018 · External reference
Can sterilization methods influence surface properties of resin composites? A purpose for previewing bias in laboratory bacterial adhesion tests
10.1002/jemt.23979 · 2022 · External reference
