Research graph
References from Fracture resistance and surface roughness assessment of digitally fabricated interim bridges. Local targets link to admitted publications; unresolved targets remain external evidence.
Physical and mechanical properties of 3D-Printed provisional crowns and fixed dental prosthesis resins compared to CAD/CAM milled and conventional provisional resins: a systematic review and meta-analysis
10.3390/polym14132691 · 2022 · External reference
The occlusal precision of milled versus printed provisional crowns
10.1016/j.jdent.2021.103924 · 2022 · External reference
Dimensional accuracy of extrusion- and photopolymerization-based 3D printers: in vitro study comparing printed casts
10.1016/j.prosdent.2019.11.011 · 2021 · External reference
Comparison of the accuracy of resin-composite crowns fabricated by three-dimensional printing and milling methods
10.4012/dmj.2022-074 · 2022 · External reference
Degree of conversion of 3D printing resins used for splints and orthodontic appliances under different postpolymerization conditions
10.1007/s00784-023-04893-8 · 2023 · External reference
A review of dental composites: challenges, chemistry aspects, filler influences, and future insights
2022 · External reference
Effects of pontic span and fiber reinforcement on fracture strength of multi-unit provisional fixed partial dentures
10.1016/j.jds.2018.11.008 · 2019 · External reference
The span length and cross-sectional design affect values of strength
10.1016/j.dental.2004.05.009 · 2005 · External reference
The clinical potential of 3D-Printed crowns reinforced with Zirconia and glass silica microfillers
10.3390/jfb14050267 · 2023 · External reference
In vitro study of fracture strength of provisional crown materials
10.4047/jap.2015.7.1.27 · 2015 · External reference
The fracture resistance of 3D-printed versus milled provisional crowns: an in vitro study
10.1371/journal.pone.0285760 · 2023 · External reference
Comparison of intaglio surface trueness of interim dental crowns fabricated with sla 3d printing, dlp 3d printing, and milling technologies
10.3390/healthcare9080983 · 2021 · External reference
Accuracy of additively manufactured and milled interim 3-Unit fixed dental prostheses
10.1111/jopr.13454 · 2022 · External reference
Fracture resistance of three-unit fixed dental prostheses fabricated with milled and 3D printed composite-based materials
2021 · External reference
In vitro resistance of reinforced interim fixed partial dentures
10.1067/mpr.2003.29 · 2003 · External reference
Marginal integrity of temporary bridges constructed by CAD/CAM, three dimensional printer and conventional method
10.21608/dsu.2023.194261.1161 · 2023 · External reference
A comparison of three core buildup materials used in conjunction with two post systems in endodontically treated anterior teeth
10.1016/s0099-2399(89)80072-x · 1989 · External reference
Effect of connector design on fracture resistance in Zirconia-based fixed partial dentures for upper anterior region
10.2209/tdcpublication.2015-0034 · 2016 · External reference
Influence of remaining coronal tooth structure location on the fracture resistance of restored endodontically treated anterior teeth
10.1016/j.prosdent.2006.02.026 · 2006 · External reference
Influence of conventional, CAD-CAM, and 3D printing fabrication techniques on the marginal integrity and surface roughness and wear of interim crowns
10.3390/app11198964 · 2021 · External reference
Surface properties of polymer resins fabricated with subtractive and additive manufacturing techniques
10.3390/polym13234077 · 2021 · External reference
In vitro comparison of the surface roughness of polymethyl methacrylate and bis-acrylic resins for interim restorations before and after polishing
10.1016/j.prosdent.2021.02.009 · 2021 · External reference
Strain gauge analysis and fracture resistance of implant-supported PEKK hybrid abutments restored with two crown materials: an in vitro study
10.17219/dmp/170311 · 2023 · External reference
Comparative analysis of fracture resistance between cad/cam materials for interim fixed prosthesis
10.3390/ma14247791 · 2021 · External reference
Fracture load of 3D-Printed interim three-unit fixed dental prostheses: impact of printing orientation and post-curing time
10.3390/polym15071737 · 2023 · External reference
Evaluation of fracture resistance and marginal fit of implant-supported interim crowns fabricated by conventional, additive and subtractive methods
10.1186/s12903-024-04597-9 · 2024 · External reference
Influence of aging process and restoration thickness on the fracture resistance of provisional crowns: a comparative study
10.1016/j.sdentj.2023.07.017 · 2023 · External reference
Fracture load of 4-unit interim fixed partial dentures using 3D-printed and traditionally manufactured materials
10.1016/j.prosdent.2022.12.013 · 2023 · External reference
Three-unit reinforced polyetheretherketone composite FDPs: influence of fabrication method on load-bearing capacity and failure types
10.4012/dmj.2013-345 · 2015 · External reference
Mode of failure and finite element analysis of custom-made PEEK post–core (milled and pressed)
10.1007/s10266-025-01084-7 · 2025 · External reference
Fracture resistance of analog and CAD-CAM long-span fixed provisional restorations: an in vitro experimental study
2025 · External reference
Materials in digital dentistry—A review
10.1111/jerd.12566 · 2020 · External reference
Measurement of the maximum bite force in the natural dentition with a gnathodynamometer
10.18044/medinform.201412.70 · 2014 · External reference
Marginal and internal gaps, surface roughness and fracture resistance of provisional crowns fabricated with 3D printing and milling systems
10.2341/22-095-l · 2023 · External reference
Influence of printing orientation on mechanical properties of aged 3D-printed restorative resins
10.1016/j.dental.2024.02.023 · 2024 · External reference
Stress distribution in all-ceramic posterior 4-unit fixed dental prostheses supported in different ways: finite element analysis
10.1097/id.0000000000000429 · 2016 · External reference
Comparison of surface roughness and color stainability of 3-dimensionally printed interim prosthodontic material with conventionally fabricated and CAD-CAM milled materials
10.1016/j.prosdent.2021.01.027 · 2022 · External reference
Machining characteristics and surface integrity of yttria stabilized tetragonal zirconia in high speed deep grinding
10.1016/s0921-5093(02)00466-5 · 2003 · External reference
Surface quality achieved by polishing and by varnishing of temporary crown and fixed partial denture resins clinical implications
10.1016/s0022-3913(99)70053-3 · 1999 · External reference
The effect of three polishing systems on the surface roughness of four hybrid composites: a profilometric and scanning electron microscopy study
10.1016/s0022-3913(96)90343-1 · 1996 · External reference
