Research graph
References from Material parameters for the VGM and SMCS model of ADC12 cast aluminium alloy: Calibration and verification. Local targets link to admitted publications; unresolved targets remain external evidence.
Experimental study and finite element analysis on the local buckling behavior of aluminium alloy beams under concentrated loads
10.1016/j.tws.2016.04.003 · 2016 · External reference
Optimum analysis of cast aluminum joint in aluminum alloy lattice shell structures
2009 · External reference
Constitutive modeling on cyclic behaviour of AlSi12Fe cast aluminium alloy
10.1016/j.istruc.2024.108006 · 2025 · External reference
A novel rheological high pressure die-casting process for preparing large thin-walled Al-Si-Fe-Mg-Sr alloy with high heat conductivity, high plasticity and medium strength
10.1016/j.msea.2020.139040 · 2020 · External reference
Improvement in mechanical, thermal conductivity and corrosion performances of a new high-thermally conductive Al-Si-Fe alloy through a novel R-HPDC process
10.1016/j.jmatprotec.2019.116586 · 2020 · External reference
Investigation on the effects of isothermal holding temperature and time on the coarsening mechanism and rheological properties of ADC12 Al semi-solid slurry
2024 · External reference
Influence of T6 heat treatment on the microstructure and tribological properties of ADC12-GNPs composites
2023 · External reference
Effect of the microstructural characteristics of die-cast ADC12 alloy controlled by Na and Cu on the mechanical properties of the alloy
2022 · External reference
Precise analysis of effects of aging on mechanical properties of cast ADC12 aluminum alloy
10.1016/j.msea.2015.04.072 · 2015 · External reference
Experimental cyclic behaviour and constitutive modeling of ADC12 cast aluminium alloy
10.1016/j.istruc.2025.108872 · 2025 · External reference
Fatigue tests on edge cracked four-point bend steel specimens repaired by CFRP
10.1016/j.compstruct.2019.03.055 · 2019 · External reference
Numerical analysis of central mixed-mode cracking in steel plates repaired with CFRP materials
10.1016/j.tws.2019.106196 · 2019 · External reference
On fracture locus in the equivalent strain and stress triaxiality space
10.1016/j.ijmecsci.2004.02.006 · 2004 · External reference
Constitutive modeling of void shearing effect in ductile fracture of porous materials
10.1016/j.engfracmech.2007.07.022 · 2008 · External reference
Ductile damage model calibration for high-strength structural steels
10.1016/j.conbuildmat.2020.120632 · 2020 · External reference
Experimental and numerical investigation of ductile fracture for AA6061-T6 sheets at room and elevated temperatures
10.1016/j.ijmecsci.2022.107201 · 2022 · External reference
Strain-rate and stress-state dependent ductile fracture model of S690 high-strength steel
10.1016/j.jcsr.2023.107852 · 2023 · External reference
Verification of void growth-based exponential damage function for ductile crack initiation over the full range of stress triaxialities
10.1016/j.engfracmech.2022.108571 · 2022 · External reference
Strain rate dependent ductile fracture behavior of Q960 ultra-high-strength steel
10.1016/j.ijmecsci.2025.110183 · 2025 · External reference
Continuum theory of ductile rupture by void nucleation and growth: part I - yield criteria and flow rules for porous ductile media
10.1115/1.3443401 · 1977 · External reference
An analysis of ductile rupture in notched bars
10.1016/0022-5096(84)90031-0 · 1984 · External reference
Continuum damage mechanics: part I - general concepts
10.1115/1.3173661 · 1988 · External reference
A continuous damage mechanics model for ductile fracture
10.1115/1.3225775 · 1985 · External reference
Ductile fracture of WAAM steel: experiments, simulations and model calibration
10.1016/j.ijmecsci.2025.110684 · 2025 · External reference
The relationship between constraint and ductile fracture initiation as defined by micromechanical analyses
1995 · External reference
On the mechanics of ductile failure in high-strength steel subjected to multi-axial stress-states
10.1016/0022-5096(76)90024-7 · 1976 · External reference
The void growth model and the stress modified critical strain model to predict ductile fracture in structural steels
10.1061/(asce)0733-9445(2006)132:12(1907) · 2006 · External reference
Toughness parameters calibration of Chinese structural aluminum alloys
2020 · External reference
Damage predictions for the 2024-T351 aluminium alloy under both monotonic and cyclic loadings
2024 · External reference
Prediction of ductile fracture for metal alloys using a shear modified void growth model
10.1016/j.engfracmech.2017.12.042 · 2018 · External reference
Application of extended Mohr-Coulomb criterion to ductile fracture
10.1007/s10704-009-9422-8 · 2010 · External reference
Experimental and numerical investigation of ductile fracture for AA6061-T6 sheets at room and elevated temperatures
10.1016/j.ijmecsci.2022.107201 · 2022 · External reference
Ductile fracture prediction of AA6061-T6 in roll forming process
10.1016/j.mechmat.2020.103498 · 2020 · External reference
A finite element ductile failure simulation method using stress-modified fracture strain model
10.1016/j.engfracmech.2010.10.004 · 2011 · External reference
On the ductile enlargement of voids in triaxial stress fields
10.1016/0022-5096(69)90033-7 · 1969 · External reference
Material parameters in void growth model for G20Mn5QT cast steel: calibration and verification
10.1061/(asce)mt.1943-5533.0003065 · 2020 · External reference
Material parameters in void growth model for G20Mn5QT cast steel at low temperatures
10.1016/j.conbuildmat.2020.118123 · 2020 · External reference
Application of extended Mohr-Coulomb criterion to ductile fracture
10.1007/s10704-009-9422-8 · ExternalCitation · doi-reference
On the ductile enlargement of voids in triaxial stress fields
10.1016/0022-5096(69)90033-7 · ExternalCitation · doi-reference
On the mechanics of ductile failure in high-strength steel subjected to multi-axial stress-states
10.1016/0022-5096(76)90024-7 · ExternalCitation · doi-reference
An analysis of ductile rupture in notched bars
10.1016/0022-5096(84)90031-0 · ExternalCitation · doi-reference
Fatigue tests on edge cracked four-point bend steel specimens repaired by CFRP
10.1016/j.compstruct.2019.03.055 · ExternalCitation · doi-reference
Material parameters in void growth model for G20Mn5QT cast steel at low temperatures
10.1016/j.conbuildmat.2020.118123 · ExternalCitation · doi-reference
Ductile damage model calibration for high-strength structural steels
10.1016/j.conbuildmat.2020.120632 · ExternalCitation · doi-reference
Constitutive modeling of void shearing effect in ductile fracture of porous materials
10.1016/j.engfracmech.2007.07.022 · ExternalCitation · doi-reference
A finite element ductile failure simulation method using stress-modified fracture strain model
10.1016/j.engfracmech.2010.10.004 · ExternalCitation · doi-reference
Prediction of ductile fracture for metal alloys using a shear modified void growth model
10.1016/j.engfracmech.2017.12.042 · ExternalCitation · doi-reference
Verification of void growth-based exponential damage function for ductile crack initiation over the full range of stress triaxialities
10.1016/j.engfracmech.2022.108571 · ExternalCitation · doi-reference
On fracture locus in the equivalent strain and stress triaxiality space
10.1016/j.ijmecsci.2004.02.006 · ExternalCitation · doi-reference
Experimental and numerical investigation of ductile fracture for AA6061-T6 sheets at room and elevated temperatures
10.1016/j.ijmecsci.2022.107201 · ExternalCitation · doi-reference
Strain rate dependent ductile fracture behavior of Q960 ultra-high-strength steel
10.1016/j.ijmecsci.2025.110183 · ExternalCitation · doi-reference
Ductile fracture of WAAM steel: experiments, simulations and model calibration
10.1016/j.ijmecsci.2025.110684 · ExternalCitation · doi-reference
Constitutive modeling on cyclic behaviour of AlSi12Fe cast aluminium alloy
10.1016/j.istruc.2024.108006 · ExternalCitation · doi-reference
Experimental cyclic behaviour and constitutive modeling of ADC12 cast aluminium alloy
10.1016/j.istruc.2025.108872 · ExternalCitation · doi-reference
Strain-rate and stress-state dependent ductile fracture model of S690 high-strength steel
10.1016/j.jcsr.2023.107852 · ExternalCitation · doi-reference
Improvement in mechanical, thermal conductivity and corrosion performances of a new high-thermally conductive Al-Si-Fe alloy through a novel R-HPDC process
10.1016/j.jmatprotec.2019.116586 · ExternalCitation · doi-reference
Ductile fracture prediction of AA6061-T6 in roll forming process
10.1016/j.mechmat.2020.103498 · ExternalCitation · doi-reference
Precise analysis of effects of aging on mechanical properties of cast ADC12 aluminum alloy
10.1016/j.msea.2015.04.072 · ExternalCitation · doi-reference
A novel rheological high pressure die-casting process for preparing large thin-walled Al-Si-Fe-Mg-Sr alloy with high heat conductivity, high plasticity and medium strength
10.1016/j.msea.2020.139040 · ExternalCitation · doi-reference
Experimental study and finite element analysis on the local buckling behavior of aluminium alloy beams under concentrated loads
10.1016/j.tws.2016.04.003 · ExternalCitation · doi-reference
Numerical analysis of central mixed-mode cracking in steel plates repaired with CFRP materials
10.1016/j.tws.2019.106196 · ExternalCitation · doi-reference
The void growth model and the stress modified critical strain model to predict ductile fracture in structural steels
10.1061/(asce)0733-9445(2006)132:12(1907) · ExternalCitation · doi-reference
Material parameters in void growth model for G20Mn5QT cast steel: calibration and verification
10.1061/(asce)mt.1943-5533.0003065 · ExternalCitation · doi-reference
Continuum damage mechanics: part I - general concepts
10.1115/1.3173661 · ExternalCitation · doi-reference
A continuous damage mechanics model for ductile fracture
10.1115/1.3225775 · ExternalCitation · doi-reference
Continuum theory of ductile rupture by void nucleation and growth: part I - yield criteria and flow rules for porous ductile media
10.1115/1.3443401 · ExternalCitation · doi-reference
