Research graph
References from Mechanical study of Twintex-TPU adhesive joints for leading-edge erosion protection of wind turbine blades. Local targets link to admitted publications; unresolved targets remain external evidence.
Validation of the multi-objective structural optimisation of a composite wind turbine blade
10.1016/j.compstruct.2018.07.114 · 2018 · External reference
Development of a structural optimization strategy for the design of next generation large thermoplastic wind turbine blades
10.1007/s00158-011-0722-z · 2012 · External reference
Composite upcycling: an experimental study on mechanical behaviour of injection moulded parts prepared from recycled material extrusion printed parts, previously prepared using glass fibre polypropylene composite industry waste
10.1016/j.jclepro.2025.145280 · 2025 · External reference
Circular economy innovation: a deep investigation on 3D printing of industrial waste polypropylene and carbon fibre composites, Resources
10.1016/j.resconrec.2024.107667 · 2024 · External reference
Design and analysis of extrusion-compression molding setup for processing of glass fiber reinforced polypropylene composites
2023 · External reference
Formability and failure mechanisms of continuous glass fiber-reinforced polypropylene composite laminates in thermoforming below the melting temperature
10.3390/polym16202885 · 2024 · External reference
Experimental evaluation of a fully recyclable thermoplastic composite
10.1016/j.compstruct.2015.12.049 · 2016 · External reference
Leading edge erosion of wind turbine blades: understanding, prevention and protection
10.1016/j.renene.2021.01.044 · 2021 · External reference
Numerical investigation of rain droplet impact on offshore wind turbine blades under different rainfall conditions: a parametric study
10.1016/j.compstruct.2020.112096 · 2020 · External reference
A novel solution for preventing leading edge erosion in wind turbine blades
2021 · External reference
Recent developments in the protection of wind turbine blades against leading edge erosion: materials solutions and predictive modelling
10.1016/j.renene.2023.118966 · 2023 · External reference
A review of thermoplastic composites on wind turbine blades
10.1016/j.compositesb.2025.112411 · 2025 · External reference
Unravelling the interphase-bond strength relationship in novel co-bonded thermoplastic-thermoset hybrid composites for leading edge protection of wind turbine blades
10.1016/j.polymertesting.2022.107856 · 2023 · External reference
Effects of contamination and erosion at the leading edge of blade tip airfoils on the annual energy production of wind turbines
10.1016/j.renene.2017.09.002 · 2018 · External reference
10.1520/mnl56-eb
10.1520/mnl56-eb · External reference
Costs of repair of wind turbine blades: influence of technology aspects
10.1002/we.2552 · 2020 · External reference
A review on rain erosion protection of wind turbine blades
10.1007/s11998-018-0134-8 · 2019 · External reference
On erosion issues associated with the leading edge of wind turbine blades
10.1088/0022-3727/46/38/383001 · 2013 · External reference
Solid particle erosion and viscoelastic properties of thermoplastic polyurethanes
10.3144/expresspolymlett.2015.18 · 2015 · External reference
Study of erosion efficiency of polymers and polymer composites
10.1016/j.polymertesting.2005.10.009 · 2006 · External reference
Continuously prepared highly conductive and stretchable SWNT/MWNT synergistically composited electrospun thermoplastic polyurethane yarns for wearable sensing
10.1039/c7tc04959e · 2018 · External reference
Cell structure and hardness evolutions of TPU foamed sheets with high hardness via a temperature rising foaming process
10.1016/j.supflu.2022.105654 · 2022 · External reference
TPU nanocomposites with good adhesive strength and water resistance for thermal sublimation transfer printing
10.1016/j.ijadhadh.2025.103972 · 2025 · External reference
Investigation of mode I fatigue crack growth in CFRP-aluminium adhesive joints: effects of loading protocols, fiber bridging, and similitude parameters
10.1016/j.engfracmech.2025.111010 · 2025 · External reference
Development of reprocessable structural adhesives based on covalent adaptable networks for wind turbine blade
10.1016/j.compositesb.2025.112519 · 2025 · External reference
Numerical simulation of adhesive-free glass fibre hydrofoil structural demonstrators under flexural bending
2025 · External reference
Composite adhesive-bonded joint reinforcement by incorporation of nano-alumina particles
2016 · External reference
Cohesive/adhesive failure interaction in ductile adhesive joints Part I: a smeared-crack model for cohesive failure
10.1016/j.ijadhadh.2016.03.009 · 2016 · External reference
On adhesively bonded joints with a mixed failure mode—an experimental and numerical study
10.1016/j.tws.2023.110987 · 2023 · External reference
Mechanical analysis of unidirectional glass fibre reinforced epoxy composite joints manufactured by adhesive bonding and co-curing techniques
10.1016/j.matdes.2025.114739 · 2025 · External reference
Unresolved reference
2005 · External reference
Unresolved reference
External reference
Unresolved reference
External reference
Unresolved reference
External reference
Unresolved reference
External reference
Unresolved reference
External reference
Unresolved reference
External reference
Fracture energy estimation of DCB specimens made of glass/epoxy: an experimental study
2013 · External reference
DCB test for the interlaminar fracture toughness of composites
2010 · External reference
Enhanced fracture resistance of thermoset/thermoplastic interfaces through crack trapping in a morphology gradient
10.1016/j.polymer.2021.123497 · 2021 · External reference
Novel co-bonded thermoplastic elastomer-epoxy/glass hybrid composites: the effect of cure temperature on the interphase morphology
2022 · External reference
Calculation of principal directional strains of layers inside carbon fiber laminates based on sequential strain measurements
10.1007/s40799-024-00752-7 · 2025 · External reference
Costs of repair of wind turbine blades: influence of technology aspects
10.1002/we.2552 · ExternalCitation · doi-reference
Development of a structural optimization strategy for the design of next generation large thermoplastic wind turbine blades
10.1007/s00158-011-0722-z · ExternalCitation · doi-reference
A review on rain erosion protection of wind turbine blades
10.1007/s11998-018-0134-8 · ExternalCitation · doi-reference
Calculation of principal directional strains of layers inside carbon fiber laminates based on sequential strain measurements
10.1007/s40799-024-00752-7 · ExternalCitation · doi-reference
A review of thermoplastic composites on wind turbine blades
10.1016/j.compositesb.2025.112411 · ExternalCitation · doi-reference
Development of reprocessable structural adhesives based on covalent adaptable networks for wind turbine blade
10.1016/j.compositesb.2025.112519 · ExternalCitation · doi-reference
Experimental evaluation of a fully recyclable thermoplastic composite
10.1016/j.compstruct.2015.12.049 · ExternalCitation · doi-reference
Validation of the multi-objective structural optimisation of a composite wind turbine blade
10.1016/j.compstruct.2018.07.114 · ExternalCitation · doi-reference
Numerical investigation of rain droplet impact on offshore wind turbine blades under different rainfall conditions: a parametric study
10.1016/j.compstruct.2020.112096 · ExternalCitation · doi-reference
Investigation of mode I fatigue crack growth in CFRP-aluminium adhesive joints: effects of loading protocols, fiber bridging, and similitude parameters
10.1016/j.engfracmech.2025.111010 · ExternalCitation · doi-reference
Cohesive/adhesive failure interaction in ductile adhesive joints Part I: a smeared-crack model for cohesive failure
10.1016/j.ijadhadh.2016.03.009 · ExternalCitation · doi-reference
TPU nanocomposites with good adhesive strength and water resistance for thermal sublimation transfer printing
10.1016/j.ijadhadh.2025.103972 · ExternalCitation · doi-reference
Composite upcycling: an experimental study on mechanical behaviour of injection moulded parts prepared from recycled material extrusion printed parts, previously prepared using glass fibre polypropylene composite industry waste
10.1016/j.jclepro.2025.145280 · ExternalCitation · doi-reference
Mechanical analysis of unidirectional glass fibre reinforced epoxy composite joints manufactured by adhesive bonding and co-curing techniques
10.1016/j.matdes.2025.114739 · ExternalCitation · doi-reference
Enhanced fracture resistance of thermoset/thermoplastic interfaces through crack trapping in a morphology gradient
10.1016/j.polymer.2021.123497 · ExternalCitation · doi-reference
Study of erosion efficiency of polymers and polymer composites
10.1016/j.polymertesting.2005.10.009 · ExternalCitation · doi-reference
Unravelling the interphase-bond strength relationship in novel co-bonded thermoplastic-thermoset hybrid composites for leading edge protection of wind turbine blades
10.1016/j.polymertesting.2022.107856 · ExternalCitation · doi-reference
Effects of contamination and erosion at the leading edge of blade tip airfoils on the annual energy production of wind turbines
10.1016/j.renene.2017.09.002 · ExternalCitation · doi-reference
Leading edge erosion of wind turbine blades: understanding, prevention and protection
10.1016/j.renene.2021.01.044 · ExternalCitation · doi-reference
Recent developments in the protection of wind turbine blades against leading edge erosion: materials solutions and predictive modelling
10.1016/j.renene.2023.118966 · ExternalCitation · doi-reference
Circular economy innovation: a deep investigation on 3D printing of industrial waste polypropylene and carbon fibre composites, Resources
10.1016/j.resconrec.2024.107667 · ExternalCitation · doi-reference
Cell structure and hardness evolutions of TPU foamed sheets with high hardness via a temperature rising foaming process
10.1016/j.supflu.2022.105654 · ExternalCitation · doi-reference
On adhesively bonded joints with a mixed failure mode—an experimental and numerical study
10.1016/j.tws.2023.110987 · ExternalCitation · doi-reference
Continuously prepared highly conductive and stretchable SWNT/MWNT synergistically composited electrospun thermoplastic polyurethane yarns for wearable sensing
10.1039/c7tc04959e · ExternalCitation · doi-reference
On erosion issues associated with the leading edge of wind turbine blades
10.1088/0022-3727/46/38/383001 · ExternalCitation · doi-reference
10.1520/mnl56-eb
10.1520/mnl56-eb · ExternalCitation · doi-reference
Solid particle erosion and viscoelastic properties of thermoplastic polyurethanes
10.3144/expresspolymlett.2015.18 · ExternalCitation · doi-reference
Formability and failure mechanisms of continuous glass fiber-reinforced polypropylene composite laminates in thermoforming below the melting temperature
10.3390/polym16202885 · ExternalCitation · doi-reference
