Research graph
References from Abrasive slurry jet focusing using a shadow mask for the micromachining of helical channels. Local targets link to admitted publications; unresolved targets remain external evidence.
Evaluation of the heat transfer performance of helical coils of non-circular tubes
10.1631/jzus.a1000296 · 2011 · External reference
Analysis of mixing in a helical microchannel
2020 · External reference
Simulation of helical flows in microchannels
10.1002/aic.10071 · 2004 · External reference
Two-phase flow structures in a helically coiled microchannel: an experimental investigation
10.1063/5.0171004 · 2023 · External reference
Lab on a rod: size-based particle separation and sorting in a helical channel
10.1063/5.0030917 · 2020 · External reference
3D-printed microfluidic device for the detection of pathogenic bacteria using size-based separation in helical channel with trapezoid cross-section
2015 · External reference
3D helical membranes for process intensification of membrane separation via generation of Dean vortices
10.1016/j.memsci.2022.120969 · 2022 · External reference
Inertial particle separation in helical channels: a calibrated numerical analysis
10.1063/5.0030930 · 2020 · External reference
Continuous separation of cells and particles in microfluidic systems
10.1039/b915999c · 2010 · External reference
The origins and the future of microfluidics
10.1038/nature05058 · 2006 · External reference
Effect of entrained air in abrasive water jet micro-machining: reduction of channel width and waviness using slurry entrainment
10.1016/j.wear.2015.10.008 · 2015 · External reference
A thick SU-8 mask for microabrasive jet machining on glass
10.1007/s00170-008-1520-7 · 2009 · External reference
Erosion behaviour and pattern transfer accuracy of protecting masks for micro-abrasive blasting
10.1016/j.jmatprotec.2003.10.037 · 2004 · External reference
Implementation of a shadow mask for direct writing in abrasive jet micro-machining
10.1016/j.jmatprotec.2015.04.007 · 2015 · External reference
Model for patterned erosion
10.1016/s0043-1648(99)00177-5 · 1999 · External reference
An analytical solution for mechanical etching of glass by powder blasting
10.1023/a:1020359220269 · 2002 · External reference
Surface evolution models for abrasive jet micromachining of holes in glass and polymethylmethacrylate (PMMA)
10.1088/0960-1317/17/11/003 · 2007 · External reference
Abrasive jet micromachining of polymethylmethacrylate
10.1016/j.wear.2007.01.063 · 2007 · External reference
Tapered mask and its effect on the fluid flow and machining efficiency of a multiphase jet
10.1016/j.jmapro.2020.01.006 · 2020 · External reference
Accuracy of the pattern transfer from the metal mask to the workpiece surface during multiphase jet machining
10.1007/s00170-019-04607-z · 2020 · External reference
Masked micro-channel machining in aluminum alloy and borosilicate glass using abrasive water jet micro-machining
10.1016/j.jmapro.2018.08.017 · 2018 · External reference
Integration of CFD simulated abrasive waterjet flow dynamics with the material removal model for kerf geometry prediction in overlapped erosion on Ti-6Al-4V alloy
10.1016/j.simpat.2023.102788 · 2023 · External reference
Prediction and mechanism of surface evolution in high-pressure slurry jet micro-machining of channels
10.1016/j.precisioneng.2023.04.003 · 2023 · External reference
Modelling framework to predict shallow-to-deep geometries of milled pockets by incorporating the effect of waterjet flow on nonplanar target
10.1007/s00170-024-14364-3 · 2024 · External reference
Modeling eroded topography in masked abrasive slurry jet pocket milling
10.1016/j.ijmecsci.2024.109830 · 2025 · External reference
Tape’n roll inertial microfluidics
10.1016/j.sna.2019.111630 · 2019 · External reference
Abrasive jet turning of glass and PMMA rods and the micro-machining of helical channels
10.1016/j.precisioneng.2018.03.010 · 2018 · External reference
Micro-abrasive air jet machining technology for fabrication of helical grooves on bovine bone
2025 · External reference
Abrasive slurry jet machining of maskless helical micro-channels on rods: process modeling using computational fluid dynamics
10.1016/j.powtec.2025.121196 · 2025 · External reference
Modeling abrasive slurry jet machined micro-channel topography on curved surfaces
10.1016/j.precisioneng.2025.10.007 · 2026 · External reference
Biocompatibly coated 304 stainless steel as superior corrosion-resistant implant material to 316L steel
10.1007/s11665-013-0590-3 · 2013 · External reference
Jet properties and mixing chamber flow in a high-pressure abrasive slurry jet: part II—machining rates and CFD modeling
10.1007/s00170-018-3041-3 · 2019 · External reference
Unresolved reference
2024 · External reference
The critical raw materials in cutting tools for machining applications: a review
10.3390/ma13061377 · 2020 · External reference
Reassessment of the scale-determining equation for advanced turbulence models
10.2514/3.10041 · 1988 · External reference
Wall function boundary conditions including heat transfer and compressibility
10.2514/1.3539 · 2004 · External reference
Unresolved reference
2022 · External reference
Numerical investigation on the internal flow and the particle movement in the abrasive waterjet nozzle
10.1016/j.powtec.2016.09.089 · 2017 · External reference
Unresolved reference
2011 · External reference
Drag coefficient and terminal velocity of spherical and nonspherical particles
10.1016/0032-5910(89)80008-7 · 1989 · External reference
Ultra-fast X-ray particle velocimetry measurements within an abrasive water jet
10.1007/s00348-013-1476-8 · 2013 · External reference
A coefficient of restitution model for particle–surface collision of particles with a wide range of mechanical characteristics
10.1016/j.apt.2021.10.023 · 2021 · External reference
Practical estimation of erosion damage caused by solid particle impact: part 1: effects of impact parameters on a predictive equation
10.1016/j.wear.2005.01.039 · 2005 · External reference
Some reflections on the past and future of erosion
10.1016/0043-1648(95)07188-1 · 1995 · External reference
Unresolved reference
2008 · External reference
Unresolved reference
2010 · External reference
Mathematical modelling of abrasive waterjet footprints for arbitrarily moving jets: part I—single straight paths
10.1016/j.ijmachtools.2011.09.010 · 2012 · External reference
Dean flow-coupled inertial focusing in curved channels
10.1063/1.4884306 · 2014 · External reference
The lateral migration of solid particles in a laminar flow near a plane
10.1016/0301-9322(77)90001-5 · 1977 · External reference
Simulation of helical flows in microchannels
10.1002/aic.10071 · ExternalCitation · doi-reference
A thick SU-8 mask for microabrasive jet machining on glass
10.1007/s00170-008-1520-7 · ExternalCitation · doi-reference
Jet properties and mixing chamber flow in a high-pressure abrasive slurry jet: part II—machining rates and CFD modeling
10.1007/s00170-018-3041-3 · ExternalCitation · doi-reference
Accuracy of the pattern transfer from the metal mask to the workpiece surface during multiphase jet machining
10.1007/s00170-019-04607-z · ExternalCitation · doi-reference
Modelling framework to predict shallow-to-deep geometries of milled pockets by incorporating the effect of waterjet flow on nonplanar target
10.1007/s00170-024-14364-3 · ExternalCitation · doi-reference
Ultra-fast X-ray particle velocimetry measurements within an abrasive water jet
10.1007/s00348-013-1476-8 · ExternalCitation · doi-reference
Biocompatibly coated 304 stainless steel as superior corrosion-resistant implant material to 316L steel
10.1007/s11665-013-0590-3 · ExternalCitation · doi-reference
Drag coefficient and terminal velocity of spherical and nonspherical particles
10.1016/0032-5910(89)80008-7 · ExternalCitation · doi-reference
Some reflections on the past and future of erosion
10.1016/0043-1648(95)07188-1 · ExternalCitation · doi-reference
The lateral migration of solid particles in a laminar flow near a plane
10.1016/0301-9322(77)90001-5 · ExternalCitation · doi-reference
A coefficient of restitution model for particle–surface collision of particles with a wide range of mechanical characteristics
10.1016/j.apt.2021.10.023 · ExternalCitation · doi-reference
Mathematical modelling of abrasive waterjet footprints for arbitrarily moving jets: part I—single straight paths
10.1016/j.ijmachtools.2011.09.010 · ExternalCitation · doi-reference
Modeling eroded topography in masked abrasive slurry jet pocket milling
10.1016/j.ijmecsci.2024.109830 · ExternalCitation · doi-reference
Masked micro-channel machining in aluminum alloy and borosilicate glass using abrasive water jet micro-machining
10.1016/j.jmapro.2018.08.017 · ExternalCitation · doi-reference
Tapered mask and its effect on the fluid flow and machining efficiency of a multiphase jet
10.1016/j.jmapro.2020.01.006 · ExternalCitation · doi-reference
Erosion behaviour and pattern transfer accuracy of protecting masks for micro-abrasive blasting
10.1016/j.jmatprotec.2003.10.037 · ExternalCitation · doi-reference
Implementation of a shadow mask for direct writing in abrasive jet micro-machining
10.1016/j.jmatprotec.2015.04.007 · ExternalCitation · doi-reference
3D helical membranes for process intensification of membrane separation via generation of Dean vortices
10.1016/j.memsci.2022.120969 · ExternalCitation · doi-reference
Numerical investigation on the internal flow and the particle movement in the abrasive waterjet nozzle
10.1016/j.powtec.2016.09.089 · ExternalCitation · doi-reference
Abrasive slurry jet machining of maskless helical micro-channels on rods: process modeling using computational fluid dynamics
10.1016/j.powtec.2025.121196 · ExternalCitation · doi-reference
Abrasive jet turning of glass and PMMA rods and the micro-machining of helical channels
10.1016/j.precisioneng.2018.03.010 · ExternalCitation · doi-reference
Prediction and mechanism of surface evolution in high-pressure slurry jet micro-machining of channels
10.1016/j.precisioneng.2023.04.003 · ExternalCitation · doi-reference
Modeling abrasive slurry jet machined micro-channel topography on curved surfaces
10.1016/j.precisioneng.2025.10.007 · ExternalCitation · doi-reference
Integration of CFD simulated abrasive waterjet flow dynamics with the material removal model for kerf geometry prediction in overlapped erosion on Ti-6Al-4V alloy
10.1016/j.simpat.2023.102788 · ExternalCitation · doi-reference
Tape’n roll inertial microfluidics
10.1016/j.sna.2019.111630 · ExternalCitation · doi-reference
Practical estimation of erosion damage caused by solid particle impact: part 1: effects of impact parameters on a predictive equation
10.1016/j.wear.2005.01.039 · ExternalCitation · doi-reference
Abrasive jet micromachining of polymethylmethacrylate
10.1016/j.wear.2007.01.063 · ExternalCitation · doi-reference
Effect of entrained air in abrasive water jet micro-machining: reduction of channel width and waviness using slurry entrainment
10.1016/j.wear.2015.10.008 · ExternalCitation · doi-reference
Model for patterned erosion
10.1016/s0043-1648(99)00177-5 · ExternalCitation · doi-reference
An analytical solution for mechanical etching of glass by powder blasting
10.1023/a:1020359220269 · ExternalCitation · doi-reference
The origins and the future of microfluidics
10.1038/nature05058 · ExternalCitation · doi-reference
Continuous separation of cells and particles in microfluidic systems
10.1039/b915999c · ExternalCitation · doi-reference
Dean flow-coupled inertial focusing in curved channels
10.1063/1.4884306 · ExternalCitation · doi-reference
Lab on a rod: size-based particle separation and sorting in a helical channel
10.1063/5.0030917 · ExternalCitation · doi-reference
Inertial particle separation in helical channels: a calibrated numerical analysis
10.1063/5.0030930 · ExternalCitation · doi-reference
Two-phase flow structures in a helically coiled microchannel: an experimental investigation
10.1063/5.0171004 · ExternalCitation · doi-reference
Surface evolution models for abrasive jet micromachining of holes in glass and polymethylmethacrylate (PMMA)
10.1088/0960-1317/17/11/003 · ExternalCitation · doi-reference
Evaluation of the heat transfer performance of helical coils of non-circular tubes
10.1631/jzus.a1000296 · ExternalCitation · doi-reference
Wall function boundary conditions including heat transfer and compressibility
10.2514/1.3539 · ExternalCitation · doi-reference
Reassessment of the scale-determining equation for advanced turbulence models
10.2514/3.10041 · ExternalCitation · doi-reference
The critical raw materials in cutting tools for machining applications: a review
10.3390/ma13061377 · ExternalCitation · doi-reference
