Research graph
References from Deformation and recrystallization behaviors under isothermal hot compression of a novel Cu-bearing excess-Si 6xxx aluminum alloy. Local targets link to admitted publications; unresolved targets remain external evidence.
High-temperature mechanical properties of constructional 6082-T6 aluminum alloy extrusion
10.1016/j.istruc.2023.01.043 · 2023 · External reference
Hot compression deformation behavior and processing maps of Al–0.5 Mg–0.4 Si–0.1 Cu alloy
10.1016/j.jmrt.2022.07.027 · 2022 · External reference
Clustering and precipitation in Al-Mg-Si alloys during linear heating
10.1016/j.jmst.2021.11.062 · 2022 · External reference
Synergistic enhancement of strength and corrosion resistance in Al-Mg-Si alloys through chemical composition design via machine learning approaches
2025 · External reference
Investigating the effects of extrusion temperature and speed on the mechanical properties of high-strength Al-Mg-Si alloys using machine learning methods
10.1016/j.msea.2026.149858 · 2026 · External reference
The structural and compositional evolution of precipitates in Al-Mg-Si-Cu alloy
10.1016/j.actamat.2017.12.036 · 2018 · External reference
Effect of large deformation conditions on recrystallization microstructure evolution of aluminum-silicon alloy
10.1016/j.jallcom.2025.179978 · 2025 · External reference
Flow stress and microstructural evolution of a novel Al-0.8 Mg-1.0 Si-0.6 Cu-0.4 Mn-0.1 Zr alloy during high strain rate compression deformation
10.1016/j.jallcom.2025.185214 · 2025 · External reference
Constitutive equation and processing maps of an Al-Mg-Si aluminum alloy: determination and application in simulating extrusion process of complex profiles
10.1016/j.matdes.2015.12.113 · 2016 · External reference
Optimization of hot workability of an Al-Mg-Si alloy using processing maps
10.1007/bf00349653 · 1995 · External reference
Effect of prerecovery annealing on microstructure and mechanical properties of AA8021 aluminum alloy used for aluminum plastic films
10.1002/adem.202500195 · 2025 · External reference
Study on hot deformation behavior and intrinsic workability of 6063 aluminum alloys using 3D processing map
10.1016/j.jallcom.2017.04.156 · 2017 · External reference
Characterization of hot deformation behavior and constitutive modeling of Al-Mg-Si-Mn-Cr alloy
10.1007/s10853-018-3116-4 · 2019 · External reference
Hot compression deformation behavior and microstructure evolution of Al-0.5 Mg-0.4 Si alloy
10.1016/j.jallcom.2024.175282 · 2024 · External reference
Hot deformation and processing map of a typical Al–Zn–Mg–Cu alloy
10.1016/j.jallcom.2012.10.114 · 2013 · External reference
3D processing map and hot deformation behavior of 6A02 aluminum alloy
10.1016/j.jallcom.2018.01.299 · 2018 · External reference
Hot deformation behavior and processing map development of cryorolled AA6063 alloy under compression and tension
10.1016/j.ijmecsci.2020.106100 · 2021 · External reference
The effect of α‐Al (MnCr) Si dispersoids on activation energy and workability of Al‐Mg‐Si‐Cu alloys during hot deformation
2020 · External reference
Investigation of hot deformation behavior and optimization of hot workability for a novel Zr, Sc alloyed Al-Mg-Mn alloy
10.1016/j.jallcom.2025.178943 · 2025 · External reference
Characterization of hot deformation behavior and constitutive modeling of Al-Mg-Si-Mn-Cr alloy
10.1007/s10853-018-3116-4 · 2019 · External reference
Recrystallized fine grains induced by nanoparticles in Al-Si-Mg-Cu-based alloy sheets
10.1016/j.msea.2020.139791 · 2020 · External reference
Effect of Mn/Cr ratio on precipitation behaviors of α-Al (FeMnCr) Si dispersoids and mechanical properties of Al-Mg-Si-Cu alloys
10.1016/j.msea.2022.144269 · 2022 · External reference
Phase relations and precipitation in Al-Mg-Si alloys with Cu additions
10.1016/s0079-6425(03)00031-8 · 2004 · External reference
The effect of Cu addition on the precipitation sequence in the Al-Si-Mg-Cr alloy
10.3390/ma15228221 · 2022 · External reference
Microstructural evolution and mechanical properties of an Ω cross-section Al-Zn-Mg-Zr aluminum alloy profile based on hot extrusion
2025 · External reference
Microstructure and mechanical properties of Al-Zn-Mg-Zr alloy curved profile with asymmetrical cross-section based on self-bending extrusion
2025 · External reference
Recent advances in the application of orientation imaging
10.1016/s0304-3991(96)00104-0 · 1997 · External reference
Hot deformation and dynamic recrystallization in Al-Mg-Si alloy
10.1016/j.matchar.2021.110976 · 2021 · External reference
Recrystallized cube grains in an Al–Mg–Si alloy dependent on prior cold rolling
10.1080/02670836.2019.1612592 · 2019 · External reference
Analysis of hot deformation behavior of Al 5083–TiC nanocomposite using constitutive and dynamic material models
10.1016/j.matdes.2011.12.049 · 2012 · External reference
Advances in microstructural understanding of wrought aluminum alloys
10.1007/s11661-020-05908-9 · 2020 · External reference
Hot deformation behavior and 3D processing maps of AA7020 aluminum alloy
10.1016/j.jallcom.2020.156113 · 2020 · External reference
Hot tensile deformation behavior and microstructure evolution of 7075 aluminum alloy sheet
10.1016/j.jmrt.2023.02.062 · 2023 · External reference
Hot deformation behavior and microstructural evolution of homogenized 7050 aluminum alloy during compression at elevated temperature
10.1016/j.msea.2010.11.016 · 2011 · External reference
A new method for evaluation of friction in bulk metal forming
10.1016/j.jmatprotec.2004.03.029 · 2004 · External reference
Modified Arrhenius constitutive model and simulation verification of 2A12-T4 aluminum alloy during hot compression
10.1016/j.jmrt.2023.07.190 · 2023 · External reference
Determination of a constitutive relationship for AZ31B magnesium alloy and validation through comparison between simulated and real extrusion
10.1016/j.jmatprotec.2005.09.021 · 2006 · External reference
Superplastic behavior and deformation mechanism of 7B04 Al-alloy
2018 · External reference
The deformation behavior and processing maps in the isothermal compression of 7A09 aluminum alloy
10.1016/j.msea.2011.10.120 · 2012 · External reference
Effect of strain rate upon plastic flow of steel
10.1063/1.1707363 · 1944 · External reference
Constitutive modeling for elevated temperature flow behavior of 42CrMo steel
10.1016/j.commatsci.2007.08.011 · 2008 · External reference
A modified Arrhenius constitutive model of 2219-O aluminum alloy based on hot compression with simulation verification
10.1016/j.jmrt.2022.06.080 · 2022 · External reference
Physically based constitutive modeling for Ti17 alloy with original basketweave microstructure in β forging: a comparison of three approaches
10.1016/j.matchar.2021.111455 · 2021 · External reference
Modified Arrhenius constitutive model and simulation verification of 2A12-T4 aluminum alloy during hot compression
10.1016/j.jmrt.2023.07.190 · 2023 · External reference
Constitutive behavior and processing map of T2 pure copper deformed from 293 to 1073 K
10.1007/s11665-018-3210-4 · 2018 · External reference
An investigation on unstable flow during hot deformation of Inconel X750 superalloy using 3D processing map and shear band formation criterion
10.1016/j.jallcom.2024.177207 · 2025 · External reference
Evolution of hot processing map and microstructure of as-forged nickel-based superalloy during hot deformation
10.1016/j.jmrt.2023.05.060 · 2023 · External reference
Effects of strain and strain rate on dynamic recrystallization and solid-state welding behaviors of aluminum alloys
10.1016/j.jmrt.2024.02.138 · 2024 · External reference
A study of dynamic recovery and recrystallisation mechanisms in aluminium alloy AA7050 at different thermomechanical processing conditions
10.1016/j.msea.2024.147117 · 2024 · External reference
Dynamic recrystallisation: a quantitative study on grain boundary characteristics and dependence on temperature and strain rate in an aluminium alloy
10.1016/j.actamat.2024.120266 · 2024 · External reference
Effect of grain boundary Widmanstätten α colony on the anisotropic tensile properties of directed energy deposited Ti-6Al-4V alloy
10.1016/j.jmst.2023.09.057 · 2024 · External reference
A review of dynamic recrystallization phenomena in metallic materials
10.1016/j.matdes.2016.09.012 · 2016 · External reference
A review of microstructural evolution and modelling of aluminium alloys under hot forming conditions
10.3390/met10111516 · 2020 · External reference
