References

Advanced lightweight materials for automobiles: a review

10.1016/j.matdes.2022.110994 · 2022 · External reference

J. Chen, Designing Al-Ce-Si-Mg alloys for new energy vehicle thermal management: tailoring microstructure and performance through silicon content

2026 · External reference

Mechanical property prediction of aluminium alloys with varied silicon content using deep learning

10.1016/j.actamat.2024.120683 · 2025 · External reference

Vehicle giga-casting Al alloys technologies, applications, and beyond

10.1016/j.jallcom.2025.178552 · 2025 · External reference

High-pressure die-cast (HPDC) aluminium alloys for automotive applications

10.1533/9780857095466.109 · 2012 · External reference

Microstructure formation in high pressure die casting

10.1007/s12666-009-0081-2 · 2009 · External reference

Eutectic solidification and its role in casting porosity formation

10.1007/s11837-004-0254-8 · 2004 · External reference

On the formation mechanism of the ring-like microstructure of high-pressure die-cast A390 alloy

10.1016/j.matchar.2018.04.012 · 2018 · External reference

Influence of introducing Zr, Ti, Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy

10.1007/s12613-024-2882-z · 2025 · External reference

Impact of Fe intermetallic and externally solidified crystals on the tensile ductility of HPVDC thin-walled components

2026 · External reference

Mechanisms of externally solidified crystal formation in aluminum high-pressure die casting

10.1007/s00170-025-15428-8 · 2025 · External reference

Characteristics of microstructure and banded defects in die cast AM50 magnesium components

10.1179/136404605225023216 · 2005 · External reference

Understanding the formation mechanism of defect bands through ESCs evolution in non-heat-treated high-pressure die-cast AlSi9MnVZr alloy: Role of shot speeds and intensification pressure

10.1016/j.jmatprotec.2025.118915 · 2025 · External reference

On the characterization of microstructure and fracture in a high-pressure die-casting Al-10 wt%Si alloy

10.1016/j.pnsc.2019.04.008 · 2020 · External reference

Improved mechanical properties in vacuum-assist high-pressure die casting of AZ91D alloy

10.1016/j.jmatprotec.2015.12.005 · 2016 · External reference

Relationship between the 3D porosity and β-phase distributions and the mechanical properties of a high pressure die cast AZ91 Mg alloy

10.1007/s11661-013-1783-y · 2013 · External reference

Influence of porosity characteristics on the variability in mechanical properties of high pressure die casting (HPDC) AlSi7MgMn alloys

10.1016/j.jmapro.2020.04.071 · 2020 · External reference

Rheological behaviour of the mushy zone and its effect on the formation of casting defects during solidification

10.1016/s1359-6454(98)00342-5 · 1998 · External reference

Dilatant shear bands in solidifying metals

10.1038/nature05426 · 2007 · External reference

Segregation band formation in Al-Si die castings

10.1007/s11661-004-0236-z · 2004 · External reference

The thickness of defect bands in high-pressure die castings

10.1016/j.matchar.2009.06.016 · 2009 · External reference

Improved mechanical properties in vacuum-assist high-pressure die casting of AZ91D alloy

10.1016/j.jmatprotec.2015.12.005 · 2016 · External reference

Effect of runner design on the externally solidified crystals in vacuum die-cast Mg-3.0Nd-0.3Zn-0.6Zr alloy

10.1016/j.jmatprotec.2018.12.032 · 2019 · External reference

Fluidity of alloys under high-pressure die casting conditions: flow-choking mechanisms

10.1007/s11663-020-01858-0 · 2020 · External reference

Feeding mechanisms in high-pressure die castings

2010 · External reference