Research graph
References from Multiphysics coupled numerical simulation of millisecond pulse laser drilling in TC4 alloy: Hole shape evolution and thermal-fluid behavior under pulse width control. Local targets link to admitted publications; unresolved targets remain external evidence.
Laser micromachining for biomedical applications
10.1007/s11837-009-0130-7 · 2009 · External reference
Laser beam machining—A review
10.1016/j.ijmachtools.2007.10.017 · 2008 · External reference
Laser drilling of structural ceramics—A review
10.1016/j.jeurceramsoc.2016.10.031 · 2017 · External reference
High-power spatiotemporal mode-locked Yb-doped fiber laser based on transverse modes division control
10.1364/ol.568362 · 2025 · External reference
Three-stage training strategy phase unwrapping method for high speckle noises
10.1364/oe.544968 · 2024 · External reference
Dual-beam laser drilling process for thick carbon fiber reinforced plastic composites plates
10.1016/j.jmatprotec.2020.116590 · 2020 · External reference
Process modeling and optimization in laser drilling of bulk metallic glasses based on GABPNN and machine vision
10.1016/j.optlastec.2023.110502 · 2024 · External reference
10.1016/j.mtcomm.2023.105962
10.1016/j.mtcomm.2023.105962 · External reference
Effects of recast layer on fatigue performance of laser-drilled holes in nickel-based superalloy
10.1016/j.jmatprotec.2022.117821 · 2023 · External reference
10.1016/j.matpr.2022.11.483
10.1016/j.matpr.2022.11.483 · External reference
Study on hole wall morphology and defects in burst mode of femtosecond laser drilling
10.1016/j.jmapro.2024.07.081 · 2024 · External reference
Process applicability and hole wall microstructure evolution mechanism of femtosecond laser spiral drilling
10.1016/j.optlastec.2023.109941 · 2024 · External reference
Surface morphology and microstructure of the hole sidewall during drilling of Polyether-Ether-Ketone(PEEK) via single-pulse laser
10.1016/j.jmapro.2022.09.023 · 2022 · External reference
A multiphase flow model simulation of water jet-guided laser drilling in 304 stainless steel
10.1016/j.jmapro.2024.04.043 · 2024 · External reference
Laser drilling velocity in metals
10.1063/1.322578 · 1976 · External reference
An analytical model for laser drilling incorporating effects of exothermic reaction, pulse width and hole geometry
10.1016/j.ijheatmasstransfer.2005.10.002 · 2006 · External reference
Analytical model for the laser drilling of metals with absorption within the vapour
10.1088/0022-3727/32/8/016 · 1999 · External reference
A computationally efficient model of convective heat transfer and solidification characteristics during keyhole mode laser welding
10.1063/1.2537587 · 2007 · External reference
Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium
10.1088/0022-3727/40/18/037 · 2007 · External reference
Analysis of multi-phase interaction and its effects on keyhole dynamics with a multi-physics numerical model
10.1088/0022-3727/47/34/345501 · 2014 · External reference
A new approach to compute multi-reflections of laser beam in a keyhole for heat transfer and fluid flow modelling in laser welding
10.1088/0022-3727/46/50/505305 · 2013 · External reference
Level set method for two-phase incompressible flows under magnetic fields
10.1016/j.cpc.2010.02.002 · 2010 · External reference
Numerical simulation of melt hydrodynamics induced hole blockage in Quasi-CW fiber laser micro-drilling of TiAl6V4
10.1016/j.jmatprotec.2018.06.038 · 2018 · External reference
Unresolved reference
External reference
A generalized thermal modeling for laser drilling process—II. Numerical simulation and results
10.1016/s0017-9310(96)00369-9 · 1997 · External reference
A generalized thermal modeling for laser drilling process—I. Mathematical modeling and numerical methodology
10.1016/s0017-9310(96)00368-7 · 1997 · External reference
A Model for Laser Hole Drilling in Metals
10.1006/jcph.1996.0086 · 1996 · External reference
Three-dimensional thermal simulation of nanosecond laser ablation for semitransparent material
10.1016/j.apsusc.2013.06.048 · 2013 · External reference
A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems—I. Model formulation
10.1016/0017-9310(87)90094-9 · 1987 · External reference
3D heat transfer model of hybrid laser Nd : Yag-MAG welding of a S355 steel and experimental validation
10.1016/j.ijheatmasstransfer.2010.12.010 · 2011 · External reference
Experimental and numerical analysis of molten pool dynamics in adjustable ring-mode laser welding of TC4 titanium alloys
10.1016/j.ijthermalsci.2025.110548 · 2026 · External reference
Determination of the thermophysical properties of liquid and solid Ti–6Al–4V alloy
10.1007/s00339-016-9783-6 · 2016 · External reference
Precise Measurements of Thermophysical Properties of Liquid Ti–6Al–4V (Ti64) Alloy on Board the International Space Station
10.1002/adem.202000169 · 2020 · External reference
10.1002/adem.202502957
10.1002/adem.202502957 · External reference
Surface Tension and Viscosity of Industrial Ti-Alloys measured by the Oscillating Drop Method on Board Parabolic flights
10.1515/htmp.2008.27.6.401 · 2008 · External reference
A study on transient molten pool dynamics in laser polishing of Ti6Al4V using numerical simulation
10.1016/j.jmapro.2021.03.045 · 2021 · External reference
Investigating the recast layer formed during the laser trepan drilling of Inconel 718 using the Taguchi method
10.1007/s00170-006-0454-1 · 2007 · External reference
Numerical simulation of process dynamics during laser beam drilling with short pulses
10.1007/s00339-011-6702-8 · 2012 · External reference
Characteristics of spatter formation under the effects of different laser parameters during laser drilling
10.1016/s0924-0136(01)00910-4 · 2001 · External reference
The effect of laser peak power and pulse width on the hole geometry repeatability in laser percussion drilling
10.1016/s0030-3992(01)00048-2 · 2001 · External reference
10.3390/ma18153719
10.3390/ma18153719 · External reference
10.3788/aos201737.0214001
10.3788/aos201737.0214001 · External reference
Unresolved reference
1932 · External reference
10.1017/s0022112062210592
10.1017/s0022112062210592 · External reference
10.1017/s0022112062210592
10.1017/s0022112062210592 · External reference
10.1098/rspa.1950.0052
10.1098/rspa.1950.0052 · External reference
Rayleigh-Taylor instability and laser-pellet fusion
10.1103/physrevlett.33.761 · 1974 · External reference
Self‐consistent growth rate of the Rayleigh–Taylor instability in an ablatively accelerating plasma
10.1063/1.865099 · 1985 · External reference
NUMERICAL SIMULATION OF LASER BOMBARDMENT ON METAL SURFACE SPLASHING PROCESS
2023 · External reference
Rayleigh-Taylor instability and laser-pellet fusion
10.1103/physrevlett.33.761 · 1974 · External reference
Physical study of spatter and melt pool dynamics during millisecond laser metals drilling
10.1016/j.optcom.2020.126627 · 2021 · External reference
Experimental and Numerical Study of Ejection during Millisecond Laser Drilling
2018 · External reference
Study of keyhole behaviour for full penetration Nd–Yag CW laser welding
10.1088/0022-3727/38/12/005 · 2005 · External reference
Modelling of high-density laser-material interaction using fast level set method
10.1088/0022-3727/34/3/320 · 2001 · External reference
Precise Measurements of Thermophysical Properties of Liquid Ti–6Al–4V (Ti64) Alloy on Board the International Space Station
10.1002/adem.202000169 · ExternalCitation · doi-reference
10.1002/adem.202502957
10.1002/adem.202502957 · ExternalCitation · doi-reference
A Model for Laser Hole Drilling in Metals
10.1006/jcph.1996.0086 · ExternalCitation · doi-reference
Investigating the recast layer formed during the laser trepan drilling of Inconel 718 using the Taguchi method
10.1007/s00170-006-0454-1 · ExternalCitation · doi-reference
Numerical simulation of process dynamics during laser beam drilling with short pulses
10.1007/s00339-011-6702-8 · ExternalCitation · doi-reference
Determination of the thermophysical properties of liquid and solid Ti–6Al–4V alloy
10.1007/s00339-016-9783-6 · ExternalCitation · doi-reference
Laser micromachining for biomedical applications
10.1007/s11837-009-0130-7 · ExternalCitation · doi-reference
A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems—I. Model formulation
10.1016/0017-9310(87)90094-9 · ExternalCitation · doi-reference
Three-dimensional thermal simulation of nanosecond laser ablation for semitransparent material
10.1016/j.apsusc.2013.06.048 · ExternalCitation · doi-reference
Level set method for two-phase incompressible flows under magnetic fields
10.1016/j.cpc.2010.02.002 · ExternalCitation · doi-reference
An analytical model for laser drilling incorporating effects of exothermic reaction, pulse width and hole geometry
10.1016/j.ijheatmasstransfer.2005.10.002 · ExternalCitation · doi-reference
3D heat transfer model of hybrid laser Nd : Yag-MAG welding of a S355 steel and experimental validation
10.1016/j.ijheatmasstransfer.2010.12.010 · ExternalCitation · doi-reference
Laser beam machining—A review
10.1016/j.ijmachtools.2007.10.017 · ExternalCitation · doi-reference
Experimental and numerical analysis of molten pool dynamics in adjustable ring-mode laser welding of TC4 titanium alloys
10.1016/j.ijthermalsci.2025.110548 · ExternalCitation · doi-reference
Laser drilling of structural ceramics—A review
10.1016/j.jeurceramsoc.2016.10.031 · ExternalCitation · doi-reference
A study on transient molten pool dynamics in laser polishing of Ti6Al4V using numerical simulation
10.1016/j.jmapro.2021.03.045 · ExternalCitation · doi-reference
Surface morphology and microstructure of the hole sidewall during drilling of Polyether-Ether-Ketone(PEEK) via single-pulse laser
10.1016/j.jmapro.2022.09.023 · ExternalCitation · doi-reference
A multiphase flow model simulation of water jet-guided laser drilling in 304 stainless steel
10.1016/j.jmapro.2024.04.043 · ExternalCitation · doi-reference
Study on hole wall morphology and defects in burst mode of femtosecond laser drilling
10.1016/j.jmapro.2024.07.081 · ExternalCitation · doi-reference
Numerical simulation of melt hydrodynamics induced hole blockage in Quasi-CW fiber laser micro-drilling of TiAl6V4
10.1016/j.jmatprotec.2018.06.038 · ExternalCitation · doi-reference
Dual-beam laser drilling process for thick carbon fiber reinforced plastic composites plates
10.1016/j.jmatprotec.2020.116590 · ExternalCitation · doi-reference
Effects of recast layer on fatigue performance of laser-drilled holes in nickel-based superalloy
10.1016/j.jmatprotec.2022.117821 · ExternalCitation · doi-reference
10.1016/j.matpr.2022.11.483
10.1016/j.matpr.2022.11.483 · ExternalCitation · doi-reference
10.1016/j.mtcomm.2023.105962
10.1016/j.mtcomm.2023.105962 · ExternalCitation · doi-reference
Physical study of spatter and melt pool dynamics during millisecond laser metals drilling
10.1016/j.optcom.2020.126627 · ExternalCitation · doi-reference
Process applicability and hole wall microstructure evolution mechanism of femtosecond laser spiral drilling
10.1016/j.optlastec.2023.109941 · ExternalCitation · doi-reference
Process modeling and optimization in laser drilling of bulk metallic glasses based on GABPNN and machine vision
10.1016/j.optlastec.2023.110502 · ExternalCitation · doi-reference
A generalized thermal modeling for laser drilling process—I. Mathematical modeling and numerical methodology
10.1016/s0017-9310(96)00368-7 · ExternalCitation · doi-reference
A generalized thermal modeling for laser drilling process—II. Numerical simulation and results
10.1016/s0017-9310(96)00369-9 · ExternalCitation · doi-reference
The effect of laser peak power and pulse width on the hole geometry repeatability in laser percussion drilling
10.1016/s0030-3992(01)00048-2 · ExternalCitation · doi-reference
Characteristics of spatter formation under the effects of different laser parameters during laser drilling
10.1016/s0924-0136(01)00910-4 · ExternalCitation · doi-reference
10.1017/s0022112062210592
10.1017/s0022112062210592 · ExternalCitation · doi-reference
A computationally efficient model of convective heat transfer and solidification characteristics during keyhole mode laser welding
10.1063/1.2537587 · ExternalCitation · doi-reference
Laser drilling velocity in metals
10.1063/1.322578 · ExternalCitation · doi-reference
Self‐consistent growth rate of the Rayleigh–Taylor instability in an ablatively accelerating plasma
10.1063/1.865099 · ExternalCitation · doi-reference
Analytical model for the laser drilling of metals with absorption within the vapour
10.1088/0022-3727/32/8/016 · ExternalCitation · doi-reference
Modelling of high-density laser-material interaction using fast level set method
10.1088/0022-3727/34/3/320 · ExternalCitation · doi-reference
Study of keyhole behaviour for full penetration Nd–Yag CW laser welding
10.1088/0022-3727/38/12/005 · ExternalCitation · doi-reference
Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium
10.1088/0022-3727/40/18/037 · ExternalCitation · doi-reference
A new approach to compute multi-reflections of laser beam in a keyhole for heat transfer and fluid flow modelling in laser welding
10.1088/0022-3727/46/50/505305 · ExternalCitation · doi-reference
Analysis of multi-phase interaction and its effects on keyhole dynamics with a multi-physics numerical model
10.1088/0022-3727/47/34/345501 · ExternalCitation · doi-reference
10.1098/rspa.1950.0052
10.1098/rspa.1950.0052 · ExternalCitation · doi-reference
Rayleigh-Taylor instability and laser-pellet fusion
10.1103/physrevlett.33.761 · ExternalCitation · doi-reference
Three-stage training strategy phase unwrapping method for high speckle noises
10.1364/oe.544968 · ExternalCitation · doi-reference
High-power spatiotemporal mode-locked Yb-doped fiber laser based on transverse modes division control
10.1364/ol.568362 · ExternalCitation · doi-reference
Surface Tension and Viscosity of Industrial Ti-Alloys measured by the Oscillating Drop Method on Board Parabolic flights
10.1515/htmp.2008.27.6.401 · ExternalCitation · doi-reference
10.3390/ma18153719
10.3390/ma18153719 · ExternalCitation · doi-reference
10.3788/aos201737.0214001
10.3788/aos201737.0214001 · ExternalCitation · doi-reference
