Research graph
References from Laser welding of critical nuclear materials: A review of mechanisms, defect control, and advanced techniques. Local targets link to admitted publications; unresolved targets remain external evidence.
Properties of zirconium alloys and their applications in light water reactors (LWRs)
2013 · External reference
Review of candidate welding processes of RAFM steels for ITER test blanket modules and DEMO
10.1016/j.jnucmat.2010.12.248 · 2011 · External reference
Low activation steels welding with PWHT and coating for ITER test blanket modules and DEMO
10.1016/j.jnucmat.2010.09.009 · 2011 · External reference
Review of candidate welding processes of RAFM steels for ITER test blanket modules and DEMO
10.1016/j.jnucmat.2010.12.248 · 2011 · External reference
Selection of fuel cladding material for nuclear fission reactors
10.1016/j.engfailanal.2011.06.010 · 2011 · External reference
Nuclear applications: zirconium alloys
2001 · External reference
Blanket cooling of a fusion reactor
10.3390/en16041890 · 2023 · External reference
Effect of laser welding parameters on the heat input and weld-bead profile
10.1016/j.jmatprotec.2005.02.060 · 2005 · External reference
A study on effect of heat input on mode of welding, microstructure and mechanical strength in pulsed laser welding of Zr-2.5 wt.%Nb alloy
10.1016/j.jnucmat.2022.153685 · 2022 · External reference
Study on weld bead surface profile and angular distortion in 6mm thick butt weld joints of SS304 using fiber laser
10.1016/j.optlaseng.2013.08.022 · 2014 · External reference
Microstructure change in the interface of co2 laser welded zirconium alloys
10.1016/j.phpro.2009.11.078 · 2009 · External reference
Studies on mechanical properties, microstructure and fracture morphology details of laser beam welded thick SS304L plates for fusion reactor applications
10.1016/j.fusengdes.2015.04.001 · 2015 · External reference
Weld bead formation and corrosion behavior of pulsed laser welded zirconium alloy
10.1007/s00170-014-6474-3 · 2015 · External reference
Effect of heat treatment on the stress corrosion cracking of alloy 690
10.1016/s0921-5093(01)01747-6 · 2002 · External reference
Nanotwins induced by pulsed laser and their hardening effect in a Zr alloy
10.1016/j.jallcom.2018.03.126 · 2018 · External reference
Characterization of microstructure and hardness of a Zr-2.5Nb alloy surface-treated by pulsed laser
10.1016/j.matchemphys.2017.06.032 · 2017 · External reference
Bimodal plate structures induced by pulsed laser in duplex-phase Zr alloy
10.1007/s11431-016-0527-6 · 2017 · External reference
Unresolved reference
1996 · External reference
Investigation of microstructures of laser surface-treated Zr702 sheet using electron channeling contrast imaging and electron backscatter diffraction techniques
10.1016/j.surfcoat.2016.03.099 · 2016 · External reference
Laser weldability of Zr-2.5Nb alloy to AISI 410 stainless steel with Ni filler
10.1016/j.jmatprotec.2017.12.003 · 2018 · External reference
Suppression of helium induced cracking in laser repair welding of highly irradiated stainless steels
10.1016/j.jnucmat.2021.153206 · 2021 · External reference
Microstructures and mechanical properties of laser welding joint of a CLAM steel with revised chemical compositions
10.1007/s11665-016-1897-7 · 2016 · External reference
Mechanical properties and microstructure characterization of Eurofer97 steel variants in EUROfusion program
10.1016/j.fusengdes.2019.03.158 · 2019 · External reference
Characterization of residual stresses in Eurofer welded specimens: measurements by neutron diffraction and comparison with weld modeling
10.1016/j.jnucmat.2010.12.051 · 2011 · External reference
Some thoughts on the mechanisms of in-reactor corrosion of zirconium alloys
10.1016/j.jnucmat.2004.09.029 · 2005 · External reference
Surface microstructural characteristics and hardness of Cr-coated Zr702 sheet processed by pulsed laser
10.1016/j.intermet.2020.106710 · 2020 · External reference
Unresolved reference
2009 · External reference
Mechanical properties of Austenitic stainless steel 304L and 316L at elevated temperatures
10.1016/j.jmrt.2015.04.001 · 2016 · External reference
Current status of materials development of nuclear fuel cladding tubes for light water reactors
10.1016/j.nucengdes.2017.02.031 · 2017 · External reference
Current status of materials development of nuclear fuel cladding tubes for light water reactors
10.1016/j.nucengdes.2017.02.031 · 2017 · External reference
Effects of heat-treatment on the extent of chromium depletion and caustic corrosion resistance of alloy 690
10.1016/j.corsci.2006.05.043 · 2007 · External reference
Pulsed laser welding of Zr1%Nb alloy
10.1016/j.net.2018.12.016 · 2019 · External reference
Pulsed laser welding of Zr 1%Nb alloy
10.1016/j.net.2018.12.016 · 2019 · External reference
A comparison of residual stresses in multi pass narrow gap laser welds and gas-tungsten arc welds in AISI 316L stainless steel
10.1016/j.ijpvp.2013.11.002 · 2014 · External reference
Measurement and modelling of the residual stresses in autogenous and narrow gap laser welded AISI grade 316L stainless steel plates
10.1016/j.ijpvp.2016.09.007 · 2016 · External reference
Microstructural characteristics of the laser welded joint of ITER correction coil sub case
10.1016/j.fusengdes.2015.06.074 · 2015 · External reference
Solidification cracking sensibility of narrow gap laser welding on ITER-grade austenitic stainless steel
10.1016/j.fusengdes.2020.112068 · 2021 · External reference
An evaluation of multipass narrow gap laser welding as a candidate process for the manufacture of nuclear pressure vessels
10.1016/j.ijpvp.2017.08.004 · 2017 · External reference
Current progress of Chinese HCCB TBM program
10.1016/j.fusengdes.2016.02.010 · 2016 · External reference
Vacuum laser welding of SA508 steel
10.1016/j.jmatprotec.2019.116269 · 2019 · External reference
Multi-scale simulation of grain/sub-grain structure evolution during solidification in laser welding of aluminum alloys
10.1016/j.ijheatmasstransfer.2019.119252 · 2020 · External reference
Assessing the environmental sustainability and justice dimensions of nuclear electricity under circular economy and energy transition frameworks
10.1016/j.jclepro.2025.144818 · 2025 · External reference
Structure and properties of welded joints in laser and arc welding Zr‐2.5% Nb alloy
10.1080/09507119309548494 · 1993 · External reference
Underwater local dry cavity laser welding of 304 stainless steel
10.1016/j.jmatprotec.2018.05.025 · 2018 · External reference
Effect of water depth on weld quality and welding process in underwater fiber laser welding
10.1016/j.matdes.2016.11.044 · 2017 · External reference
Microstructure and mechanical characteristics of a laser welded joint in SA508 nuclear pressure vessel steel
10.1016/j.msea.2014.11.056 · 2015 · External reference
Impact of neutron irradiation on mechanical performance of FeCrAl alloy laser-beam weldments
10.1016/j.jnucmat.2018.03.036 · 2018 · External reference
Development of underwater laser cladding and underwater laser seal welding techniques for reactor components
10.1299/jpes.3.51 · 2009 · External reference
Numerical simulation and laser butt welding of zr-sn-nb-fe zirconium alloy sheets
2016 · External reference
Synergistic effect of Laves phase evolution and porosity defects in nuclear-grade FeCrAl alloy laser welded joints: experiments and crystal plasticity modeling
10.1016/j.optlastec.2022.108694 · 2023 · External reference
Residual stress in a laser welded EUROFER blanket module assembly using non-destructive neutron diffraction techniques
10.1016/j.fusengdes.2013.12.041 · 2014 · External reference
Study on molten pool flow and hot cracking of narrow gap laser welding of 316LN stainless steel for fusion reactor
10.1016/j.optlastec.2024.111633 · 2025 · External reference
Microstructure and properties of inconel 718 and AISI 416 laser welded joints
10.1016/j.jmatprotec.2018.10.039 · 2019 · External reference
Defocusing techniques for multi-pass laser welding of austenitic stainless steel
10.1016/j.phpro.2015.11.017 · 2015 · External reference
Extension of the process limits in laser beam welding of thick-walled components using the laser multi-pass narrow-gap welding (Laser-MPNG) on the example of the nickel-based material Alloy 617 occ
10.1007/s40194-021-01112-4 · 2021 · External reference
C-ring stress corrosion test for Inconel 600 and Inconel 690 sleeve joint welded by Nd:YAG laser
10.1016/s0010-938x(03)00098-2 · 2004 · External reference
Comparison of fracture properties in SA508 Gr.3 and Gr.4N high strength low alloy steels for advanced pressure vessel materials
10.1016/j.ijpvp.2015.04.010 · 2015 · External reference
Laser welding of fusion relevant steels for the European DEMO
10.1016/j.fusengdes.2018.03.039 · 2018 · External reference
Welding of zirconium alloys
10.1080/09507119409548564 · 1994 · External reference
Decomposition of the Laves phase in the fusion zone of the Inconel 718/ATI 718Plus® welded joint during isothermal holding at a temperature of 649 °C
10.1016/j.matchar.2022.112560 · 2023 · External reference
Residual stresses in laser welded ASTM A387 Grade 91 steel plates
10.1016/j.msea.2013.03.046 · 2013 · External reference
Length scale effects of micro- and meso-scale tensile tests of unirradiated and irradiated Zircaloy-4 cladding
10.1016/j.jnucmat.2024.155469 · 2025 · External reference
Characterization of high strength and high toughness Ni–Mo–Cr low alloy steels for nuclear application
10.1016/j.ijpvp.2009.11.001 · 2010 · External reference
Characterization of high strength and high toughness Ni–Mo–Cr low alloy steels for nuclear application
10.1016/j.ijpvp.2009.11.001 · 2010 · External reference
Cyclic deformation behavior and dynamic strain aging of 316LN stainless steel under low cycle fatigue loadings at 550 °C
10.1016/j.msea.2021.141411 · 2021 · External reference
Process stability and parameters optimization of narrow-gap laser vertical welding with hot wire for thick stainless steel in nuclear power plant
10.1016/j.optlastec.2019.105921 · 2020 · External reference
Texture evolution and properties analysis of R60702 pure zirconium joint by fiber laser welding
10.1016/j.matchar.2021.111581 · 2021 · External reference
Weldability of irradiated stainless steel 304 materials harvested from the national research universal (NRU) reactor
10.1016/j.jnucmat.2022.154193 · 2023 · External reference
Phase analysis of hydrogen contained Zr-2.5wt%Nb CANDU pressure tube using plasmon energy loss analysis
10.1016/j.jnucmat.2021.152978 · 2021 · External reference
Microstructural characterization of laser beam and gas tungsten arc welded zirconium-2.5Nb
10.17159/2411-9717/2017/v117n10a4 · 2017 · External reference
Effects of process parameters on the bead geometry of laser beam butt welded stainless steel sheets
10.1007/s00170-006-0432-7 · 2007 · External reference
Microstructure and mechanical-property evolution of the explosive welding joint from the same RAFM steels under explosive welding and post-weld heat treatment
10.1016/j.msea.2024.147465 · 2024 · External reference
Study of underwater laser welding repair technology
10.1007/bf03266534 · 2006 · External reference
Hydrogen in zirconium alloys: a review
10.1016/j.jnucmat.2019.02.042 · 2019 · External reference
Texture development and anisotropic deformation of zircaloys
10.1016/j.pnucene.2005.09.011 · 2006 · External reference
Temperature-dependent mechanical anisotropy in textured Zircaloy cladding
10.1016/j.jnucmat.2024.155045 · 2024 · External reference
Zirconium alloys in nuclear power engineering
10.1007/s11041-005-0002-x · 2004 · External reference
Engineering aspects of a steady state tokamak reactor (SSTR)
10.1016/0920-3796(91)90220-k · 1991 · External reference
Unresolved reference
1982 · External reference
On the strengthening mechanisms of high nitrogen austenitic stainless steels
10.1016/j.matlet.2022.133502 · 2023 · External reference
A study on laser welding of Inconel 718 and evolution of strain field using digital image correlation to estimate the localized properties
10.1016/j.optlastec.2025.112472 · 2025 · External reference
Effects of boric acid and lithium hydroxide on the corrosion behaviors of 316LN stainless steel in simulating hot functional test high-temperature pressurized water
10.1016/j.corsci.2022.110157 · 2022 · External reference
Effects of boric acid and lithium hydroxide on the corrosion behaviors of 316LN stainless steel in simulating hot functional test high-temperature pressurized water
10.1016/j.corsci.2022.110157 · 2022 · External reference
Development of welding technologies for the manufacturing of European Tritium Breeder blanket modules
10.1016/j.jnucmat.2010.12.259 · 2011 · External reference
Unresolved reference
External reference
Review on development of reduced activated ferritic/martensitic steel for fusion reactor
10.1007/s42243-022-00796-2 · 2022 · External reference
Weldability of a zirconium alloy comparing resistance and pulsed laser methods
10.1016/j.nme.2019.100693 · 2019 · External reference
Unresolved reference
External reference
A review of environment-sensitive fracture in water reactor materials
10.1016/0010-938x(85)90001-0 · 1985 · External reference
Results of underwater welding with high-power-CO2-lasers
1983 · External reference
High power laser welding in hyperbaric gas and water environments
10.2351/1.4745452 · 1997 · External reference
Investigation into the underwater laser welding of steel
10.2351/1.4745360 · 1994 · External reference
High-temperature oxidation of Cr-coated laser beam welds made from E110 zirconium alloy
10.1016/j.corsci.2021.110018 · 2022 · External reference
Resistance, electron- and laser-beam welding of zirconium alloys for nuclear applications: a review
10.1016/j.net.2020.10.005 · 2021 · External reference
Methods of creation of permanent zirconium alloy joints in Reactor Art: a review
10.17580/tsm.2016.10.13 · 2016 · External reference
Effect of energy parameters of pulsed laser welding of Zr-1%Nb alloy on metal contamination with gases and properties of welds
10.1016/j.jmapro.2019.06.025 · 2019 · External reference
Corrosion and high-temperature steam oxidation of E110 alloy and its laser welds after ion irradiation
10.1016/j.corsci.2019.02.031 · 2019 · External reference
Fiber laser welding of thick AISI 304 plate in a horizontal (2G) butt joint configuration
10.1016/j.matdes.2017.01.015 · 2017 · External reference
Development of new generation reduced activation ferritic-martensitic steels for advanced fusion reactors
10.1016/j.jnucmat.2016.05.037 · 2016 · External reference
Laser welding to expand the allowable gap in bore welding for ITER blanket hydraulic connection
10.1016/j.fusengdes.2015.06.155 · 2015 · External reference
Status and key issues of reduced activation ferritic/martensitic steels as the structural material for a DEMO blanket
10.1016/j.jnucmat.2011.05.023 · 2011 · External reference
Pulsed laser spot welding of intersection points for Zircaloy-4 spacer grid assembly
10.1016/j.matdes.2013.05.037 · 2013 · External reference
Development of RAFM steel for nuclear applications with reduced manganese, silicon and carbon content
10.1016/j.nme.2021.101070 · 2021 · External reference
Advanced oxidation-resistant iron-based alloys for LWR fuel cladding
10.1016/j.jnucmat.2013.06.041 · 2014 · External reference
Investigations on laser beam welded Inconel 718 weldments
10.1016/j.matpr.2022.09.442 · 2022 · External reference
A novel method for evaluating solidification cracking susceptibility of austenitic stainless steel using trapezoidal hot cracking test during laser welding
10.1016/j.optlastec.2024.110789 · 2024 · External reference
Current design and R& D progress of the Chinese helium cooled ceramic breeder test blanket system
10.1088/1741-4326/ab0c32 · 2019 · External reference
Unresolved reference
2016 · External reference
Investigation on microstructure and properties of narrow-gap laser welding on reduced activation ferritic/martensitic steel CLF-1 with a thickness of 35 mm
10.1016/j.jnucmat.2018.02.038 · 2018 · External reference
High temperature nano-indentation on the mechanical properties of Zr and Zr–Fe alloys: experimental and theoretical analysis
10.1016/j.mechmat.2021.104053 · 2021 · External reference
Analysis of the fracture mechanism at cryogenic temperatures of thick 316LN laser welded joints
10.1016/j.fusengdes.2019.111277 · 2019 · External reference
Comparison of residual stress induced by TIG and LBW in girth weld of AISI 304 stainless steel pipes
10.1016/j.jmatprotec.2017.05.014 · 2017 · External reference
Inhomogeneity of microstructure and mechanical properties in the interlayer regions for narrow gap laser wire filling welding of 316L stainless steel
10.1016/j.optlastec.2023.110050 · 2024 · External reference
Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors
10.1016/j.jnucmat.2015.10.019 · 2015 · External reference
Underwater Laser Welding by 4 kW CW YAG Laser
10.1080/18811248.2001.9715111 · 2001 · External reference
Fiber laser welding characteristics of commercially pure zirconium (R60702) and structure-mechanics-corrosion performances of the joint
10.1016/j.ijrmhm.2018.01.023 · 2018 · External reference
Improving corrosion resistance of Zircaloy-4 via high-current pulsed Electron beam surface irradiation
10.3390/ma18010076 · 2024 · External reference
Microstructure and mechanical properties of ultra-narrow gap laser weld joint of 100 mm-thick SUS304 steel plates
10.1016/j.jmatprotec.2018.10.017 · 2019 · External reference
Microstructure and properties of underwater wet laser welded 0Cr25Ni6Mo3N duplex stainless steel joints
2023 · External reference
An origin of corrosion resistance changes of Zr alloys: effects of Sn and Nb on grain boundary strength of surface oxide
10.1016/j.actamat.2021.116804 · 2021 · External reference
Heat treatment effects on the weld joint of CLF-1 fabricated by laser welding
10.1016/j.fusengdes.2022.113097 · 2022 · External reference
Simulation of temperature field and residual stress in high-power laser self-melting welding process of CLF-1 steel medium-thick plate
10.1016/j.fusengdes.2023.113936 · 2023 · External reference
Ultra-Narrow gap fiber laser conduction welding technology for 304 stainless steel thick plates and the mechanical properties of welding joints
10.3390/coatings12010059 · 2022 · External reference
Residual stress, micro-hardness and tensile properties of ANSI 304 stainless steel thick sheet by fiber laser welding
10.1016/j.msea.2012.11.001 · 2013 · External reference
Investigation on dissimilar laser beam welding of molybdenum to zirconium via pure titanium interlayer
10.1016/j.optlastec.2020.106327 · 2020 · External reference
Optimal control of reliability failure risk contagion dynamics in nuclear power systems
10.1016/j.net.2025.104108 · 2026 · External reference
Effect of shielding conditions of local dry cavity on weld quality in underwater Nd:YAG laser welding
10.1016/j.jmatprotec.2004.12.009 · 2006 · External reference
Welding of thick stainless steel plates up to 50 mm with high brightness lasers
10.2351/1.3567961 · 2011 · External reference
Laser–material interaction and process sensing in underwater nd:yttrium–aluminum–garnet laser welding
10.2351/1.1620002 · 2003 · External reference
Improving the strength-ductility synergy and corrosion resistance of Inconel 718/316L dissimilar laser beam welding joint via post-weld heat treatment
10.1016/j.jmrt.2023.07.202 · 2023 · External reference
Outstanding ductility of flash-butt welded Inconel 718 joints after post-weld heat treatment
10.1016/j.msea.2022.143132 · 2022 · External reference
Ultrasonic vibration assisted laser welding of nickel-based alloy and Austenite stainless steel
10.1016/j.jmapro.2017.12.023 · 2018 · External reference
Neutron Bragg edge tomography characterisation of residual strain in a laser-welded Eurofer97 joint
10.1016/j.nme.2023.101462 · 2023 · External reference
Revealing the residual stress distribution in laser welded Eurofer97 steel by neutron diffraction and Bragg edge imaging
10.1016/j.jmst.2021.12.004 · 2022 · External reference
Investigation of the residual strain and deformation mechanisms in laser-welded Eurofer97 steel for fusion reactors
10.1016/j.msea.2023.145147 · 2023 · External reference
Applications of underwater laser peening in nuclear power plant maintenance
10.1016/j.egypro.2012.01.026 · 2012 · External reference
Modification of droplet morphology and arc oscillation by magnetic field in laser-MIG hybrid welding
10.1016/j.optlaseng.2020.106138 · 2020 · External reference
Hydrogen-enhanced degradation and oxide effects in zirconium alloys for nuclear applications
10.1016/j.ijhydene.2011.04.002 · 2011 · External reference
Martensitic transformation in Eurofer-97 and ODS-Eurofer steels: a comparative study
10.1016/j.jnucmat.2014.12.112 · 2015 · External reference
Materials challenges in nuclear energy
10.1016/j.actamat.2012.11.004 · 2013 · External reference
Study of underwater laser welding repair technology
10.1007/bf03266534 · ExternalCitation · doi-reference
Effects of process parameters on the bead geometry of laser beam butt welded stainless steel sheets
10.1007/s00170-006-0432-7 · ExternalCitation · doi-reference
Weld bead formation and corrosion behavior of pulsed laser welded zirconium alloy
10.1007/s00170-014-6474-3 · ExternalCitation · doi-reference
Zirconium alloys in nuclear power engineering
10.1007/s11041-005-0002-x · ExternalCitation · doi-reference
Bimodal plate structures induced by pulsed laser in duplex-phase Zr alloy
10.1007/s11431-016-0527-6 · ExternalCitation · doi-reference
Microstructures and mechanical properties of laser welding joint of a CLAM steel with revised chemical compositions
10.1007/s11665-016-1897-7 · ExternalCitation · doi-reference
Extension of the process limits in laser beam welding of thick-walled components using the laser multi-pass narrow-gap welding (Laser-MPNG) on the example of the nickel-based material Alloy 617 occ
10.1007/s40194-021-01112-4 · ExternalCitation · doi-reference
Review on development of reduced activated ferritic/martensitic steel for fusion reactor
10.1007/s42243-022-00796-2 · ExternalCitation · doi-reference
A review of environment-sensitive fracture in water reactor materials
10.1016/0010-938x(85)90001-0 · ExternalCitation · doi-reference
Engineering aspects of a steady state tokamak reactor (SSTR)
10.1016/0920-3796(91)90220-k · ExternalCitation · doi-reference
Materials challenges in nuclear energy
10.1016/j.actamat.2012.11.004 · ExternalCitation · doi-reference
An origin of corrosion resistance changes of Zr alloys: effects of Sn and Nb on grain boundary strength of surface oxide
10.1016/j.actamat.2021.116804 · ExternalCitation · doi-reference
Effects of heat-treatment on the extent of chromium depletion and caustic corrosion resistance of alloy 690
10.1016/j.corsci.2006.05.043 · ExternalCitation · doi-reference
Corrosion and high-temperature steam oxidation of E110 alloy and its laser welds after ion irradiation
10.1016/j.corsci.2019.02.031 · ExternalCitation · doi-reference
High-temperature oxidation of Cr-coated laser beam welds made from E110 zirconium alloy
10.1016/j.corsci.2021.110018 · ExternalCitation · doi-reference
Effects of boric acid and lithium hydroxide on the corrosion behaviors of 316LN stainless steel in simulating hot functional test high-temperature pressurized water
10.1016/j.corsci.2022.110157 · ExternalCitation · doi-reference
Applications of underwater laser peening in nuclear power plant maintenance
10.1016/j.egypro.2012.01.026 · ExternalCitation · doi-reference
Selection of fuel cladding material for nuclear fission reactors
10.1016/j.engfailanal.2011.06.010 · ExternalCitation · doi-reference
Residual stress in a laser welded EUROFER blanket module assembly using non-destructive neutron diffraction techniques
10.1016/j.fusengdes.2013.12.041 · ExternalCitation · doi-reference
Studies on mechanical properties, microstructure and fracture morphology details of laser beam welded thick SS304L plates for fusion reactor applications
10.1016/j.fusengdes.2015.04.001 · ExternalCitation · doi-reference
Microstructural characteristics of the laser welded joint of ITER correction coil sub case
10.1016/j.fusengdes.2015.06.074 · ExternalCitation · doi-reference
Laser welding to expand the allowable gap in bore welding for ITER blanket hydraulic connection
10.1016/j.fusengdes.2015.06.155 · ExternalCitation · doi-reference
Current progress of Chinese HCCB TBM program
10.1016/j.fusengdes.2016.02.010 · ExternalCitation · doi-reference
Laser welding of fusion relevant steels for the European DEMO
10.1016/j.fusengdes.2018.03.039 · ExternalCitation · doi-reference
Mechanical properties and microstructure characterization of Eurofer97 steel variants in EUROfusion program
10.1016/j.fusengdes.2019.03.158 · ExternalCitation · doi-reference
Analysis of the fracture mechanism at cryogenic temperatures of thick 316LN laser welded joints
10.1016/j.fusengdes.2019.111277 · ExternalCitation · doi-reference
Solidification cracking sensibility of narrow gap laser welding on ITER-grade austenitic stainless steel
10.1016/j.fusengdes.2020.112068 · ExternalCitation · doi-reference
Heat treatment effects on the weld joint of CLF-1 fabricated by laser welding
10.1016/j.fusengdes.2022.113097 · ExternalCitation · doi-reference
Simulation of temperature field and residual stress in high-power laser self-melting welding process of CLF-1 steel medium-thick plate
10.1016/j.fusengdes.2023.113936 · ExternalCitation · doi-reference
Multi-scale simulation of grain/sub-grain structure evolution during solidification in laser welding of aluminum alloys
10.1016/j.ijheatmasstransfer.2019.119252 · ExternalCitation · doi-reference
Hydrogen-enhanced degradation and oxide effects in zirconium alloys for nuclear applications
10.1016/j.ijhydene.2011.04.002 · ExternalCitation · doi-reference
Characterization of high strength and high toughness Ni–Mo–Cr low alloy steels for nuclear application
10.1016/j.ijpvp.2009.11.001 · ExternalCitation · doi-reference
A comparison of residual stresses in multi pass narrow gap laser welds and gas-tungsten arc welds in AISI 316L stainless steel
10.1016/j.ijpvp.2013.11.002 · ExternalCitation · doi-reference
Comparison of fracture properties in SA508 Gr.3 and Gr.4N high strength low alloy steels for advanced pressure vessel materials
10.1016/j.ijpvp.2015.04.010 · ExternalCitation · doi-reference
Measurement and modelling of the residual stresses in autogenous and narrow gap laser welded AISI grade 316L stainless steel plates
10.1016/j.ijpvp.2016.09.007 · ExternalCitation · doi-reference
An evaluation of multipass narrow gap laser welding as a candidate process for the manufacture of nuclear pressure vessels
10.1016/j.ijpvp.2017.08.004 · ExternalCitation · doi-reference
Fiber laser welding characteristics of commercially pure zirconium (R60702) and structure-mechanics-corrosion performances of the joint
10.1016/j.ijrmhm.2018.01.023 · ExternalCitation · doi-reference
Surface microstructural characteristics and hardness of Cr-coated Zr702 sheet processed by pulsed laser
10.1016/j.intermet.2020.106710 · ExternalCitation · doi-reference
Nanotwins induced by pulsed laser and their hardening effect in a Zr alloy
10.1016/j.jallcom.2018.03.126 · ExternalCitation · doi-reference
Assessing the environmental sustainability and justice dimensions of nuclear electricity under circular economy and energy transition frameworks
10.1016/j.jclepro.2025.144818 · ExternalCitation · doi-reference
Ultrasonic vibration assisted laser welding of nickel-based alloy and Austenite stainless steel
10.1016/j.jmapro.2017.12.023 · ExternalCitation · doi-reference
Effect of energy parameters of pulsed laser welding of Zr-1%Nb alloy on metal contamination with gases and properties of welds
10.1016/j.jmapro.2019.06.025 · ExternalCitation · doi-reference
Effect of shielding conditions of local dry cavity on weld quality in underwater Nd:YAG laser welding
10.1016/j.jmatprotec.2004.12.009 · ExternalCitation · doi-reference
Effect of laser welding parameters on the heat input and weld-bead profile
10.1016/j.jmatprotec.2005.02.060 · ExternalCitation · doi-reference
Comparison of residual stress induced by TIG and LBW in girth weld of AISI 304 stainless steel pipes
10.1016/j.jmatprotec.2017.05.014 · ExternalCitation · doi-reference
Laser weldability of Zr-2.5Nb alloy to AISI 410 stainless steel with Ni filler
10.1016/j.jmatprotec.2017.12.003 · ExternalCitation · doi-reference
Underwater local dry cavity laser welding of 304 stainless steel
10.1016/j.jmatprotec.2018.05.025 · ExternalCitation · doi-reference
Microstructure and mechanical properties of ultra-narrow gap laser weld joint of 100 mm-thick SUS304 steel plates
10.1016/j.jmatprotec.2018.10.017 · ExternalCitation · doi-reference
Microstructure and properties of inconel 718 and AISI 416 laser welded joints
10.1016/j.jmatprotec.2018.10.039 · ExternalCitation · doi-reference
Vacuum laser welding of SA508 steel
10.1016/j.jmatprotec.2019.116269 · ExternalCitation · doi-reference
Mechanical properties of Austenitic stainless steel 304L and 316L at elevated temperatures
10.1016/j.jmrt.2015.04.001 · ExternalCitation · doi-reference
Improving the strength-ductility synergy and corrosion resistance of Inconel 718/316L dissimilar laser beam welding joint via post-weld heat treatment
10.1016/j.jmrt.2023.07.202 · ExternalCitation · doi-reference
Revealing the residual stress distribution in laser welded Eurofer97 steel by neutron diffraction and Bragg edge imaging
10.1016/j.jmst.2021.12.004 · ExternalCitation · doi-reference
Some thoughts on the mechanisms of in-reactor corrosion of zirconium alloys
10.1016/j.jnucmat.2004.09.029 · ExternalCitation · doi-reference
Low activation steels welding with PWHT and coating for ITER test blanket modules and DEMO
10.1016/j.jnucmat.2010.09.009 · ExternalCitation · doi-reference
Characterization of residual stresses in Eurofer welded specimens: measurements by neutron diffraction and comparison with weld modeling
10.1016/j.jnucmat.2010.12.051 · ExternalCitation · doi-reference
Review of candidate welding processes of RAFM steels for ITER test blanket modules and DEMO
10.1016/j.jnucmat.2010.12.248 · ExternalCitation · doi-reference
Development of welding technologies for the manufacturing of European Tritium Breeder blanket modules
10.1016/j.jnucmat.2010.12.259 · ExternalCitation · doi-reference
Status and key issues of reduced activation ferritic/martensitic steels as the structural material for a DEMO blanket
10.1016/j.jnucmat.2011.05.023 · ExternalCitation · doi-reference
Advanced oxidation-resistant iron-based alloys for LWR fuel cladding
10.1016/j.jnucmat.2013.06.041 · ExternalCitation · doi-reference
Martensitic transformation in Eurofer-97 and ODS-Eurofer steels: a comparative study
10.1016/j.jnucmat.2014.12.112 · ExternalCitation · doi-reference
Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors
10.1016/j.jnucmat.2015.10.019 · ExternalCitation · doi-reference
Development of new generation reduced activation ferritic-martensitic steels for advanced fusion reactors
10.1016/j.jnucmat.2016.05.037 · ExternalCitation · doi-reference
Investigation on microstructure and properties of narrow-gap laser welding on reduced activation ferritic/martensitic steel CLF-1 with a thickness of 35 mm
10.1016/j.jnucmat.2018.02.038 · ExternalCitation · doi-reference
Impact of neutron irradiation on mechanical performance of FeCrAl alloy laser-beam weldments
10.1016/j.jnucmat.2018.03.036 · ExternalCitation · doi-reference
Hydrogen in zirconium alloys: a review
10.1016/j.jnucmat.2019.02.042 · ExternalCitation · doi-reference
Phase analysis of hydrogen contained Zr-2.5wt%Nb CANDU pressure tube using plasmon energy loss analysis
10.1016/j.jnucmat.2021.152978 · ExternalCitation · doi-reference
Suppression of helium induced cracking in laser repair welding of highly irradiated stainless steels
10.1016/j.jnucmat.2021.153206 · ExternalCitation · doi-reference
A study on effect of heat input on mode of welding, microstructure and mechanical strength in pulsed laser welding of Zr-2.5 wt.%Nb alloy
10.1016/j.jnucmat.2022.153685 · ExternalCitation · doi-reference
Weldability of irradiated stainless steel 304 materials harvested from the national research universal (NRU) reactor
10.1016/j.jnucmat.2022.154193 · ExternalCitation · doi-reference
Temperature-dependent mechanical anisotropy in textured Zircaloy cladding
10.1016/j.jnucmat.2024.155045 · ExternalCitation · doi-reference
Length scale effects of micro- and meso-scale tensile tests of unirradiated and irradiated Zircaloy-4 cladding
10.1016/j.jnucmat.2024.155469 · ExternalCitation · doi-reference
Texture evolution and properties analysis of R60702 pure zirconium joint by fiber laser welding
10.1016/j.matchar.2021.111581 · ExternalCitation · doi-reference
Decomposition of the Laves phase in the fusion zone of the Inconel 718/ATI 718Plus® welded joint during isothermal holding at a temperature of 649 °C
10.1016/j.matchar.2022.112560 · ExternalCitation · doi-reference
Characterization of microstructure and hardness of a Zr-2.5Nb alloy surface-treated by pulsed laser
10.1016/j.matchemphys.2017.06.032 · ExternalCitation · doi-reference
Pulsed laser spot welding of intersection points for Zircaloy-4 spacer grid assembly
10.1016/j.matdes.2013.05.037 · ExternalCitation · doi-reference
Effect of water depth on weld quality and welding process in underwater fiber laser welding
10.1016/j.matdes.2016.11.044 · ExternalCitation · doi-reference
Fiber laser welding of thick AISI 304 plate in a horizontal (2G) butt joint configuration
10.1016/j.matdes.2017.01.015 · ExternalCitation · doi-reference
On the strengthening mechanisms of high nitrogen austenitic stainless steels
10.1016/j.matlet.2022.133502 · ExternalCitation · doi-reference
Investigations on laser beam welded Inconel 718 weldments
10.1016/j.matpr.2022.09.442 · ExternalCitation · doi-reference
High temperature nano-indentation on the mechanical properties of Zr and Zr–Fe alloys: experimental and theoretical analysis
10.1016/j.mechmat.2021.104053 · ExternalCitation · doi-reference
Residual stress, micro-hardness and tensile properties of ANSI 304 stainless steel thick sheet by fiber laser welding
10.1016/j.msea.2012.11.001 · ExternalCitation · doi-reference
Residual stresses in laser welded ASTM A387 Grade 91 steel plates
10.1016/j.msea.2013.03.046 · ExternalCitation · doi-reference
Microstructure and mechanical characteristics of a laser welded joint in SA508 nuclear pressure vessel steel
10.1016/j.msea.2014.11.056 · ExternalCitation · doi-reference
Cyclic deformation behavior and dynamic strain aging of 316LN stainless steel under low cycle fatigue loadings at 550 °C
10.1016/j.msea.2021.141411 · ExternalCitation · doi-reference
Outstanding ductility of flash-butt welded Inconel 718 joints after post-weld heat treatment
10.1016/j.msea.2022.143132 · ExternalCitation · doi-reference
Investigation of the residual strain and deformation mechanisms in laser-welded Eurofer97 steel for fusion reactors
10.1016/j.msea.2023.145147 · ExternalCitation · doi-reference
Microstructure and mechanical-property evolution of the explosive welding joint from the same RAFM steels under explosive welding and post-weld heat treatment
10.1016/j.msea.2024.147465 · ExternalCitation · doi-reference
Pulsed laser welding of Zr 1%Nb alloy
10.1016/j.net.2018.12.016 · ExternalCitation · doi-reference
Resistance, electron- and laser-beam welding of zirconium alloys for nuclear applications: a review
10.1016/j.net.2020.10.005 · ExternalCitation · doi-reference
Optimal control of reliability failure risk contagion dynamics in nuclear power systems
10.1016/j.net.2025.104108 · ExternalCitation · doi-reference
Weldability of a zirconium alloy comparing resistance and pulsed laser methods
10.1016/j.nme.2019.100693 · ExternalCitation · doi-reference
Development of RAFM steel for nuclear applications with reduced manganese, silicon and carbon content
10.1016/j.nme.2021.101070 · ExternalCitation · doi-reference
Neutron Bragg edge tomography characterisation of residual strain in a laser-welded Eurofer97 joint
10.1016/j.nme.2023.101462 · ExternalCitation · doi-reference
Current status of materials development of nuclear fuel cladding tubes for light water reactors
10.1016/j.nucengdes.2017.02.031 · ExternalCitation · doi-reference
Study on weld bead surface profile and angular distortion in 6mm thick butt weld joints of SS304 using fiber laser
10.1016/j.optlaseng.2013.08.022 · ExternalCitation · doi-reference
Modification of droplet morphology and arc oscillation by magnetic field in laser-MIG hybrid welding
10.1016/j.optlaseng.2020.106138 · ExternalCitation · doi-reference
Process stability and parameters optimization of narrow-gap laser vertical welding with hot wire for thick stainless steel in nuclear power plant
10.1016/j.optlastec.2019.105921 · ExternalCitation · doi-reference
Investigation on dissimilar laser beam welding of molybdenum to zirconium via pure titanium interlayer
10.1016/j.optlastec.2020.106327 · ExternalCitation · doi-reference
Synergistic effect of Laves phase evolution and porosity defects in nuclear-grade FeCrAl alloy laser welded joints: experiments and crystal plasticity modeling
10.1016/j.optlastec.2022.108694 · ExternalCitation · doi-reference
Inhomogeneity of microstructure and mechanical properties in the interlayer regions for narrow gap laser wire filling welding of 316L stainless steel
10.1016/j.optlastec.2023.110050 · ExternalCitation · doi-reference
A novel method for evaluating solidification cracking susceptibility of austenitic stainless steel using trapezoidal hot cracking test during laser welding
10.1016/j.optlastec.2024.110789 · ExternalCitation · doi-reference
Study on molten pool flow and hot cracking of narrow gap laser welding of 316LN stainless steel for fusion reactor
10.1016/j.optlastec.2024.111633 · ExternalCitation · doi-reference
A study on laser welding of Inconel 718 and evolution of strain field using digital image correlation to estimate the localized properties
10.1016/j.optlastec.2025.112472 · ExternalCitation · doi-reference
Microstructure change in the interface of co2 laser welded zirconium alloys
10.1016/j.phpro.2009.11.078 · ExternalCitation · doi-reference
Defocusing techniques for multi-pass laser welding of austenitic stainless steel
10.1016/j.phpro.2015.11.017 · ExternalCitation · doi-reference
Texture development and anisotropic deformation of zircaloys
10.1016/j.pnucene.2005.09.011 · ExternalCitation · doi-reference
Investigation of microstructures of laser surface-treated Zr702 sheet using electron channeling contrast imaging and electron backscatter diffraction techniques
10.1016/j.surfcoat.2016.03.099 · ExternalCitation · doi-reference
C-ring stress corrosion test for Inconel 600 and Inconel 690 sleeve joint welded by Nd:YAG laser
10.1016/s0010-938x(03)00098-2 · ExternalCitation · doi-reference
Effect of heat treatment on the stress corrosion cracking of alloy 690
10.1016/s0921-5093(01)01747-6 · ExternalCitation · doi-reference
Structure and properties of welded joints in laser and arc welding Zr‐2.5% Nb alloy
10.1080/09507119309548494 · ExternalCitation · doi-reference
Welding of zirconium alloys
10.1080/09507119409548564 · ExternalCitation · doi-reference
Underwater Laser Welding by 4 kW CW YAG Laser
10.1080/18811248.2001.9715111 · ExternalCitation · doi-reference
Current design and R& D progress of the Chinese helium cooled ceramic breeder test blanket system
10.1088/1741-4326/ab0c32 · ExternalCitation · doi-reference
Development of underwater laser cladding and underwater laser seal welding techniques for reactor components
10.1299/jpes.3.51 · ExternalCitation · doi-reference
Microstructural characterization of laser beam and gas tungsten arc welded zirconium-2.5Nb
10.17159/2411-9717/2017/v117n10a4 · ExternalCitation · doi-reference
Methods of creation of permanent zirconium alloy joints in Reactor Art: a review
10.17580/tsm.2016.10.13 · ExternalCitation · doi-reference
Laser–material interaction and process sensing in underwater nd:yttrium–aluminum–garnet laser welding
10.2351/1.1620002 · ExternalCitation · doi-reference
Welding of thick stainless steel plates up to 50 mm with high brightness lasers
10.2351/1.3567961 · ExternalCitation · doi-reference
Investigation into the underwater laser welding of steel
10.2351/1.4745360 · ExternalCitation · doi-reference
High power laser welding in hyperbaric gas and water environments
10.2351/1.4745452 · ExternalCitation · doi-reference
Ultra-Narrow gap fiber laser conduction welding technology for 304 stainless steel thick plates and the mechanical properties of welding joints
10.3390/coatings12010059 · ExternalCitation · doi-reference
Blanket cooling of a fusion reactor
10.3390/en16041890 · ExternalCitation · doi-reference
Improving corrosion resistance of Zircaloy-4 via high-current pulsed Electron beam surface irradiation
10.3390/ma18010076 · ExternalCitation · doi-reference
