Research graph
References from Numerical and experimental optimization of gating design, pouring parameters, and degassing for gravity-cast A356 aluminum tensile specimens. Local targets link to admitted publications; unresolved targets remain external evidence.
An investigation on the mechanical and tribological properties of an ultrasonic-assisted stir casting Al-Cu-Mg matrix-based composite reinforced with agro waste ash particles
10.46793/aeletters.2024.9.1.5 · 2024 · External reference
Determination of tribological properties of aluminum cylinder by application of Taguchi method and ANN-based model
2018 · External reference
Stir cast AA 6351/graphene/TiB2/rice husk ash composite: fabrication and assessment of mechanical properties
10.1177/09544062231213182 · 2024 · External reference
Microstructural, mechanical, and cavitation erosion analysis of stir casted AA6063, doped with SiC and Er2O3 particulates
10.1177/09544062251339987 · 2025 · External reference
Application of metal matrix nanocomposites in engineering
10.46793/adeletters.2024.3.4.5 · 2024 · External reference
Yield improvement for sand casting product using casting Simulation Tool
10.37934/aram.134.1.90104 · 2025 · External reference
Simulation study of sand casting by using runner & gates modification in gating system
10.22214/ijraset.2024.61586 · 2024 · External reference
Study on the optimization of investment casting process of exhaust elbow for high-power engine
10.3390/met14040481 · 2024 · External reference
10.3390/met12040656
10.3390/met12040656 · External reference
Uneven distribution of cooling rate, microstructure and mechanical properties for A356-T6 wheels fabricated by low pressure die casting
10.1016/j.jmapro.2024.08.001 · 2024 · External reference
Desain Gating System dan parameter proses Pengecoran untuk Mengatasi Cacat Rongga Poros Engkol
2017 · External reference
Optimization design of a gating system for sand casting aluminium A356 using a Taguchi method and multi-objective culture-based QPSO algorithm
2016 · External reference
Interaction of tool and process design on the mechanical and tribological behaviour of an injection-moulded polyamide-steel gear set
2023 · External reference
Progress in materials science modelling of defects in aluminium cast products
2022 · External reference
Effects of microporosity on tensile properties of A356 aluminum alloy
10.1016/j.msea.2007.01.130 · 2007 · External reference
Effect of gating system design on the quality of aluminum alloy castings
10.3390/met14030312 · 2024 · External reference
Numerical optimization of gating system parameters for a magnesium alloy casting with multiple performance characteristics
10.1016/j.jmatprotec.2007.08.036 · 2008 · External reference
Altair inspire cast simulation approach in optimization of casting parameters of JIS H 5202 tensile test specimens: bridging the gap between solidification theory and experimental validation
10.55927/fjst.v4i10.271 · 2025 · External reference
Analysis and simulation of die filling in gravity die casting using MAGMA Software
2015 · External reference
Design, simulation and fabrication of gravity die casting mould to achieve complete mould filling
2013 · External reference
Effect of process variables and melt treatment conditions during cooling slope semi solid slurry generation process of Al-7Si-0.3 Mg alloy
2022 · External reference
Lightweight design of the large arm of palletizing robot based on Inspire software
2025 · External reference
Mould design improvement and flaw analysis for investment casting process using numerical computation with experimental validation
2025 · External reference
Optimization of investment casting process parameters of hydraulic flange using artificial neural network technique
2025 · External reference
Refinement of A356 alloy using continuous rheological extrusion Al-Ti-V-B master alloy
10.1007/s41230-025-3135-0 · 2025 · External reference
Unresolved reference
2023 · External reference
Effects of strain rate on stress-strain curves in 2024 aluminum alloy after solution heat treatment
10.2320/matertrans.mt-la2022020 · 2024 · External reference
Integrated design of castings: effect of porosity on mechanical performance
2012 · External reference
Evaluating production process improvement strategies in a manufacturing SME : a case study
2024 · External reference
A novel design of multiplexer based on the cellular interaction in quantum dot technology with energy dissipation analysis
2024 · External reference
Analisis dan optimalisasi desain produk aluminium A356 berdasarkan standar JIS H 5202 menggunakan altair inspire cast
10.70609/metrotech.v5i1.8439 · 2026 · External reference
Study on cold forging process design for automotive components of Al 6061 alloys
10.14445/22315381/ijett-v72i5p112 · 2024 · External reference
Gas entrainment behavior of aluminum alloy engine crankcases during the low-pressure-die-casting process
10.1016/j.jmatprotec.2018.11.016 · 2019 · External reference
Porosity, hydrogen and bifilm content in Al alloy castings
10.1016/j.msea.2011.01.084 · 2011 · External reference
Characteristics of mold filling and entrainment of oxide film in low pressure casting of A356 alloy
10.1016/j.msea.2014.12.058 · 2015 · External reference
Simulation-driven product development of cast components with allowance for process-induced material behaviour
2020 · External reference
Revealing the structure and evolution of entrained oxide film in Mg–Y alloy castings
10.1007/s10853-021-06333-y · 2021 · External reference
The effect of holding liquid aluminum alloys on oxide film content
10.1007/s11663-010-9439-4 · 2011 · External reference
Consumption of entrained gases within bifilms during a Mg-alloy casting process
10.1007/s11663-021-02237-z · 2021 · External reference
The effect of hidden damage on local process variability in Al-10 pct Si alloy high-pressure die castings
10.1007/s11663-024-03344-3 · 2025 · External reference
Analysis of the quality of incoming AlSi9Mn alloy ingots
10.1007/s40962-023-01146-y · 2024 · External reference
Complete casting handbook: metal casting processes, metallurgy, techniques and design
2011 · External reference
Revealing the structure and evolution of entrained oxide film in Mg–Y alloy castings
10.1007/s10853-021-06333-y · ExternalCitation · doi-reference
The effect of holding liquid aluminum alloys on oxide film content
10.1007/s11663-010-9439-4 · ExternalCitation · doi-reference
Consumption of entrained gases within bifilms during a Mg-alloy casting process
10.1007/s11663-021-02237-z · ExternalCitation · doi-reference
The effect of hidden damage on local process variability in Al-10 pct Si alloy high-pressure die castings
10.1007/s11663-024-03344-3 · ExternalCitation · doi-reference
Analysis of the quality of incoming AlSi9Mn alloy ingots
10.1007/s40962-023-01146-y · ExternalCitation · doi-reference
Refinement of A356 alloy using continuous rheological extrusion Al-Ti-V-B master alloy
10.1007/s41230-025-3135-0 · ExternalCitation · doi-reference
Uneven distribution of cooling rate, microstructure and mechanical properties for A356-T6 wheels fabricated by low pressure die casting
10.1016/j.jmapro.2024.08.001 · ExternalCitation · doi-reference
Numerical optimization of gating system parameters for a magnesium alloy casting with multiple performance characteristics
10.1016/j.jmatprotec.2007.08.036 · ExternalCitation · doi-reference
Gas entrainment behavior of aluminum alloy engine crankcases during the low-pressure-die-casting process
10.1016/j.jmatprotec.2018.11.016 · ExternalCitation · doi-reference
Effects of microporosity on tensile properties of A356 aluminum alloy
10.1016/j.msea.2007.01.130 · ExternalCitation · doi-reference
Porosity, hydrogen and bifilm content in Al alloy castings
10.1016/j.msea.2011.01.084 · ExternalCitation · doi-reference
Characteristics of mold filling and entrainment of oxide film in low pressure casting of A356 alloy
10.1016/j.msea.2014.12.058 · ExternalCitation · doi-reference
Stir cast AA 6351/graphene/TiB2/rice husk ash composite: fabrication and assessment of mechanical properties
10.1177/09544062231213182 · ExternalCitation · doi-reference
Microstructural, mechanical, and cavitation erosion analysis of stir casted AA6063, doped with SiC and Er2O3 particulates
10.1177/09544062251339987 · ExternalCitation · doi-reference
Study on cold forging process design for automotive components of Al 6061 alloys
10.14445/22315381/ijett-v72i5p112 · ExternalCitation · doi-reference
Simulation study of sand casting by using runner & gates modification in gating system
10.22214/ijraset.2024.61586 · ExternalCitation · doi-reference
Effects of strain rate on stress-strain curves in 2024 aluminum alloy after solution heat treatment
10.2320/matertrans.mt-la2022020 · ExternalCitation · doi-reference
10.3390/met12040656
10.3390/met12040656 · ExternalCitation · doi-reference
Effect of gating system design on the quality of aluminum alloy castings
10.3390/met14030312 · ExternalCitation · doi-reference
Study on the optimization of investment casting process of exhaust elbow for high-power engine
10.3390/met14040481 · ExternalCitation · doi-reference
Yield improvement for sand casting product using casting Simulation Tool
10.37934/aram.134.1.90104 · ExternalCitation · doi-reference
Application of metal matrix nanocomposites in engineering
10.46793/adeletters.2024.3.4.5 · ExternalCitation · doi-reference
An investigation on the mechanical and tribological properties of an ultrasonic-assisted stir casting Al-Cu-Mg matrix-based composite reinforced with agro waste ash particles
10.46793/aeletters.2024.9.1.5 · ExternalCitation · doi-reference
Altair inspire cast simulation approach in optimization of casting parameters of JIS H 5202 tensile test specimens: bridging the gap between solidification theory and experimental validation
10.55927/fjst.v4i10.271 · ExternalCitation · doi-reference
Analisis dan optimalisasi desain produk aluminium A356 berdasarkan standar JIS H 5202 menggunakan altair inspire cast
10.70609/metrotech.v5i1.8439 · ExternalCitation · doi-reference
