Contact and support
Need help, have a question, or want to contact the ResearchHub team?
© 2026 ResearchHub. Built for responsible scholarly connection.
Privacy-aware community infrastructureResearch graph
References from Plastic deformation mechanism of negative rake angle tools in low-speed cutting. Local targets link to admitted publications; unresolved targets remain external evidence.
Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: from mechanisms to application
10.1016/j.cja.2021.08.011 · 2022 · External reference
Recent innovations in laser additive manufacturing of titanium alloys
10.1088/2631-7990/ad2545 · 2024 · External reference
The influence of interface morphology on the interfacial bonding behavior and mechanical properties of TC4/TA2 composite plates
10.1016/j.msea.2025.148401 · 2025 · External reference
Micro-zone cutting temperature measurement using a nitrogen-extracted boron and hydrogen co-doped diamond tool for ultra-precision machining[J]
10.1016/j.ijmachtools.2024.104244 · 2025 · External reference
Frictional dynamics of tool-chip interactions in ultra-precision cutting of titanium alloy utilizing a PFPE-coated diamond tool[J]
10.1016/j.jmapro.2025.06.054 · 2025 · External reference
Grindability and microstructural effect of nickel-based superalloys in magnetic field-assisted ultra-precision grinding[J]
10.1016/j.ijmachtools.2025.104284 · 2025 · External reference
Enhancing machining efficiency of Ti-6Al-4V through multi-axial ultrasonic vibration-assisted machining and hybrid nanofluid minimum quantity lubrication
10.1016/j.jmapro.2024.03.073 · 2024 · External reference
Modeling of Ti-6Al-4V machining force considering material microstructure evolution
10.1007/s00170-016-9964-7 · 2017 · External reference
Negative rake milling[J]
10.1049/jipe.1945.0019 · 1945 · External reference
An analysis of saw-toothed chip formation[J]
10.1016/s0007-8506(07)63273-9 · 1982 · External reference
Mechanics of saw-tooth chip formation in metal cutting[J]
10.1115/1.2831200 · 1999 · External reference
Deformation-induced αʹʹ and ω transition mechanisms and dislocation dynamics in the early stages of adiabatic shearing of a dual-phase titanium alloy[J]
2025 · External reference
Concerning elastic and plastic components of deformation[J]
10.1016/0020-7683(80)90013-x · 1980 · External reference
A fundamental study of cutting employing orthogonal negative rake tools[J]
1983 · External reference
An investigation of the influence of feed and rake angle on the ratio of feed force to cutting force when machining with negative rake angle tools[J]
10.1016/s0007-8506(07)61376-6 · 1984 · External reference
Macro plastic deformation of cutting edge-a method for maximum utilization of cutting tool[J]
10.1016/s0007-8506(07)61173-1 · 1992 · External reference
Finite element analysis of the rake angle effects in orthogonal metal cutting[J]
10.1016/0020-7403(95)00036-w · 1995 · External reference
An experimental study of the effect of cutting speed on chip breaking[J]
10.1016/0924-0136(95)01845-x · 1996 · External reference
Machined surface plastic strain in orthogonal cutting by subsequent recrystallizations technique[J]
10.1016/0043-1648(96)06921-9 · 1996 · External reference
On chip formation in cutting metallic materials using tools with a large negative rake[J]
10.3103/s1063457611040058 · 2011 · External reference
Friction in orthogonal cutting finite elements models with large negative rake angle[J]
2016 · External reference
Mechanical behavior of material removal under various rake angle diamond tool ultra-precision cutting of titanium alloy[J]
10.1016/j.jmrt.2025.07.225 · 2025 · External reference
el.Cutting characteristics and wear mechanisms of SiCp/Al composites machined by PCD milling cutters with varied negative rake angles[J]
10.1016/j.jmapro.2025.07.043 · 2025 · External reference
el.Thermal-mechanical model for cutting with negative rake angle based on a modified slip-line field approach[J]
10.1016/j.ijmecsci.2019.105167 · 2019 · External reference
el.Cutting temperature prediction in negative-rake-angle machining with chamfered insert based on a modified slip-line field model[J]
10.1016/j.ijmecsci.2019.105273 · 2020 · External reference
Elastic and plastic chip deformation mechanism in 1D vibration-assisted metal cutting[J]
10.1016/j.procir.2018.05.027 · 2018 · External reference
Material instability under localized severe plastic deformation during high speed turning of titanium alloy Ti-6.5AL-2Zr-1Mo-1V[J]
10.1016/j.jmatprotec.2018.09.002 · 2019 · External reference
Application of 3D imaging for analyzing the chip groove shapes of cutting inserts[J]
10.3390/app14073134 · 2024 · External reference
A study on mechanisms of saw-tooth chip formation in hard turning under hybrid nanofluid-assisted MQL environment [J]
10.1177/16878132241289286 · 2024 · External reference
Chip formation and morphology in cryogenic machining of Al-SiC composites [J]
2025 · External reference
Molecular dynamics simulation study on the nano-cutting mechanism of polycrystalline layered aluminum film using negative rake angle cutting tools and micro-laser assistance[J]
2025 · External reference
Towards understanding the surface strengthening mechanism in negative rake angle cutting of additively manufactured stainless steel[J]
10.1016/j.cirp.2025.04.071 · 2025 · External reference
Coupling effects of laser assistance and tool rake angle on brittle-ductile transition in monocrystalline silicon[J]
10.1016/j.jmrt.2025.08.060 · 2025 · External reference
10.1016/j.measurement.2024.116461
10.1016/j.measurement.2024.116461 · External reference
Defects formation mechanism of selective laser melted Al2O3 /TC4 composites based on numerical and experimental results[J]
10.1016/j.optlastec.2025.114345 · 2026 · External reference
Catastrophic thermoplastic shear[J]
10.1115/1.3629585 · 1964 · External reference
Modeling of Ti-6Al-4V machining force considering material microstructure evolution
10.1007/s00170-016-9964-7 · ExternalCitation · doi-reference
Finite element analysis of the rake angle effects in orthogonal metal cutting[J]
10.1016/0020-7403(95)00036-w · ExternalCitation · doi-reference
Concerning elastic and plastic components of deformation[J]
10.1016/0020-7683(80)90013-x · ExternalCitation · doi-reference
Machined surface plastic strain in orthogonal cutting by subsequent recrystallizations technique[J]
10.1016/0043-1648(96)06921-9 · ExternalCitation · doi-reference
An experimental study of the effect of cutting speed on chip breaking[J]
10.1016/0924-0136(95)01845-x · ExternalCitation · doi-reference
Towards understanding the surface strengthening mechanism in negative rake angle cutting of additively manufactured stainless steel[J]
10.1016/j.cirp.2025.04.071 · ExternalCitation · doi-reference
Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: from mechanisms to application
10.1016/j.cja.2021.08.011 · ExternalCitation · doi-reference
Micro-zone cutting temperature measurement using a nitrogen-extracted boron and hydrogen co-doped diamond tool for ultra-precision machining[J]
10.1016/j.ijmachtools.2024.104244 · ExternalCitation · doi-reference
Grindability and microstructural effect of nickel-based superalloys in magnetic field-assisted ultra-precision grinding[J]
10.1016/j.ijmachtools.2025.104284 · ExternalCitation · doi-reference
el.Thermal-mechanical model for cutting with negative rake angle based on a modified slip-line field approach[J]
10.1016/j.ijmecsci.2019.105167 · ExternalCitation · doi-reference
el.Cutting temperature prediction in negative-rake-angle machining with chamfered insert based on a modified slip-line field model[J]
10.1016/j.ijmecsci.2019.105273 · ExternalCitation · doi-reference
Enhancing machining efficiency of Ti-6Al-4V through multi-axial ultrasonic vibration-assisted machining and hybrid nanofluid minimum quantity lubrication
10.1016/j.jmapro.2024.03.073 · ExternalCitation · doi-reference
Frictional dynamics of tool-chip interactions in ultra-precision cutting of titanium alloy utilizing a PFPE-coated diamond tool[J]
10.1016/j.jmapro.2025.06.054 · ExternalCitation · doi-reference
el.Cutting characteristics and wear mechanisms of SiCp/Al composites machined by PCD milling cutters with varied negative rake angles[J]
10.1016/j.jmapro.2025.07.043 · ExternalCitation · doi-reference
Material instability under localized severe plastic deformation during high speed turning of titanium alloy Ti-6.5AL-2Zr-1Mo-1V[J]
10.1016/j.jmatprotec.2018.09.002 · ExternalCitation · doi-reference
Mechanical behavior of material removal under various rake angle diamond tool ultra-precision cutting of titanium alloy[J]
10.1016/j.jmrt.2025.07.225 · ExternalCitation · doi-reference
Coupling effects of laser assistance and tool rake angle on brittle-ductile transition in monocrystalline silicon[J]
10.1016/j.jmrt.2025.08.060 · ExternalCitation · doi-reference
10.1016/j.measurement.2024.116461
10.1016/j.measurement.2024.116461 · ExternalCitation · doi-reference
The influence of interface morphology on the interfacial bonding behavior and mechanical properties of TC4/TA2 composite plates
10.1016/j.msea.2025.148401 · ExternalCitation · doi-reference
Defects formation mechanism of selective laser melted Al2O3 /TC4 composites based on numerical and experimental results[J]
10.1016/j.optlastec.2025.114345 · ExternalCitation · doi-reference
Elastic and plastic chip deformation mechanism in 1D vibration-assisted metal cutting[J]
10.1016/j.procir.2018.05.027 · ExternalCitation · doi-reference
Macro plastic deformation of cutting edge-a method for maximum utilization of cutting tool[J]
10.1016/s0007-8506(07)61173-1 · ExternalCitation · doi-reference
An investigation of the influence of feed and rake angle on the ratio of feed force to cutting force when machining with negative rake angle tools[J]
10.1016/s0007-8506(07)61376-6 · ExternalCitation · doi-reference
An analysis of saw-toothed chip formation[J]
10.1016/s0007-8506(07)63273-9 · ExternalCitation · doi-reference
Negative rake milling[J]
10.1049/jipe.1945.0019 · ExternalCitation · doi-reference
Recent innovations in laser additive manufacturing of titanium alloys
10.1088/2631-7990/ad2545 · ExternalCitation · doi-reference
Mechanics of saw-tooth chip formation in metal cutting[J]
10.1115/1.2831200 · ExternalCitation · doi-reference
Catastrophic thermoplastic shear[J]
10.1115/1.3629585 · ExternalCitation · doi-reference
A study on mechanisms of saw-tooth chip formation in hard turning under hybrid nanofluid-assisted MQL environment [J]
10.1177/16878132241289286 · ExternalCitation · doi-reference
On chip formation in cutting metallic materials using tools with a large negative rake[J]
10.3103/s1063457611040058 · ExternalCitation · doi-reference
Application of 3D imaging for analyzing the chip groove shapes of cutting inserts[J]
10.3390/app14073134 · ExternalCitation · doi-reference
