Research graph
References from Influence of sulphur on component mixing during laser additive manufacturing process: From single-track to multi-track. Local targets link to admitted publications; unresolved targets remain external evidence.
Investigation of laser cladding using Inconel 625-Enhanced Fe-based coatings: microstructure, wear behavior, and corrosion resistance properties
10.1016/j.apsusc.2025.162398 · 2025 · External reference
Experimental and numerical investigation of the Ti-Ni-Cu coating on AZ91D magnesium alloy by laser surface-modification: the microstructure, wear and corrosion behavior
10.1016/j.triboint.2025.110565 · 2025 · External reference
Investigating the influence of target distance in laser offline measurement based on self-mixing interference and its potential for monitoring additive manufacturing processes
2025 · External reference
Numerical simulation and experimental analysis of thermal conduction and stress in laser cladding repair of thin-walled parts
10.1016/j.optlastec.2024.111897 · 2025 · External reference
Thermal life assessment of laser powder-directed energy deposited NiCrAlY/CuCrZr bimetallic clad for rocket nozzle applications
10.1016/j.surfcoat.2024.131532 · 2024 · External reference
Thermal simulation and experimental study on TiCN/Ni60 cladding coating assisted by electromagnetic
2025 · External reference
The influence of sulphur content on the quality of laser cutting of steel
10.1016/j.jmatprotec.2007.04.103 · 2007 · External reference
Modeling metal deposition in heat transfer analyses of additive manufacturing processes
10.1016/j.finel.2014.04.003 · 2014 · External reference
Discrete element modeling of selective laser sintering additive manufacturing processes
2023 · External reference
Microstructural evolution and anti-corrosion properties of laser cladded Ti based coating on Q235 steel
10.1016/j.surfcoat.2024.130383 · 2024 · External reference
Rapid preparation of nanocrystalline high-entropy alloy coating with extremely low dilution rate and excellent corrosion resistance via ultra-high-speed laser cladding
10.1016/j.intermet.2024.108346 · 2024 · External reference
Dynamic evolution of temperature field, flow field, and solidification behavior during multilayer multitrack laser cladding
10.1016/j.surfcoat.2024.131010 · 2024 · External reference
Metallic alloy droplet impact and solidification under an alternating magnetic field: scaling laws and regime maps
10.1016/j.ijthermalsci.2024.109645 · 2025 · External reference
Electromagnetic effects on the solidification of a metallic alloy droplet impacting onto a surface
10.1016/j.colsurfa.2024.134806 · 2024 · External reference
Analytical and numerical investigation of successive metallic alloy droplets impacting onto a surface: regime maps and scaling laws based on energy analysis
10.1016/j.colsurfa.2024.135941 · 2025 · External reference
Statistical and machine learning approaches integrated with CFD for effective thermal conductivity prediction of NEPCMs in natural convection between horizontal concentric cylinders
2026 · External reference
A multiphase modeling for investigating temperature history, flow field and solidification microstructure evolution of FeCoNiCrTi coating by laser cladding
10.1016/j.optlastec.2023.110197 · 2024 · External reference
Numerical study on the effect of pressure and nozzle dimension on particle distribution and velocity in laser cladding under vacuum base on CFD
10.1016/j.jmapro.2016.05.019 · 2016 · External reference
A review of the flow behavior of laser cladding pools based on inclined substrates
10.1016/j.jmapro.2024.04.045 · 2024 · External reference
Revealing multiphysics effects on microstructure characteristics in powder-fed laser cladding based on a comprehensive model
10.1016/j.jmrt.2024.02.001 · 2024 · External reference
Finite element simulation analysis of flow heat transfer behavior and molten pool characteristics during 0Cr16Ni5Mo1 laser cladding
10.1016/j.jmrt.2024.03.154 · 2024 · External reference
Modeling of solidification process during multi-track laser cladding with 3D cellular automata coupling gas-liquid interface tracking and solute suppression nucleation
10.1016/j.jmatprotec.2023.117927 · 2023 · External reference
The inclined morphology and molten pool of laser cladding under different cladding methods
10.1016/j.optlastec.2024.111445 · 2025 · External reference
The suppression of liquation cracking in the repair process of non-weldable K447A superalloys by laser surface remelting-assisted laser cladding
10.1016/j.surfcoat.2024.131637 · 2025 · External reference
Modeling of the effect of powder parameters on laser cladding using coaxial nozzle
10.1016/j.surfcoat.2018.12.002 · 2019 · External reference
Scaling laws and numerical modelling of the laser direct energy deposition
10.1016/j.ijheatmasstransfer.2023.124717 · 2023 · External reference
Numerical simulation and surface morphology of laser cladding of Ni-based C276 alloy coatings on AerMet100 steel surface
10.1016/j.jmrt.2023.10.045 · 2023 · External reference
Synchronous optimization of surface flatness and interfacial bonding strength in laser cladding by Marangoni flow
10.1016/j.jmapro.2024.07.043 · 2024 · External reference
Microstructures and high-temperature tensile properties of a Co-Al-W-based superalloy prepared by laser additive manufacturing
10.1016/j.jallcom.2024.178378 · 2025 · External reference
A multi-level capture algorithm for accelerating cellular automata predictions of grain structure and texture in additive manufacturing
2025 · External reference
Influence of oxygen content on melt pool dynamics in metal additive manufacturing: high-fidelity modeling with experimental validation
10.1016/j.actamat.2023.118824 · 2023 · External reference
Study on the visualization of laser cladding molten pool flow field based on attention mechanism
10.1016/j.jmapro.2024.12.034 · 2025 · External reference
Influence of NbC particles on microstructure and wear properties of AlCoCrFeNi2.1 eutectic high-entropy alloy coatings prepared by laser cladding
10.1016/j.surfcoat.2025.131963 · 2025 · External reference
Multicomponent multiphase modeling of dissimilar laser cladding process with high-speed steel on medium carbon steel
10.1016/j.ijheatmasstransfer.2019.118990 · 2020 · External reference
Asymmetric molten pool morphology in wire-arc directed energy deposition: evolution mechanism and suppression strategy
2022 · External reference
A comprehensive analytical model for laser powder-fed additive manufacturing
2016 · External reference
A novel model of laser energy attenuation by powder particles for laser solid forming
10.1016/j.ijmachtools.2019.103440 · 2019 · External reference
In-situ NbC reinforced Fe-based coating by laser cladding: simulation and experiment
10.1016/j.surfcoat.2021.127027 · 2021 · External reference
Mesoscopic evolution of molten pool during selective laser melting of superalloy Inconel 738 at elevating preheating temperature
10.1016/j.matdes.2021.110355 · 2022 · External reference
Evolution of melt pool motion and temperature field based on powder scale modeling during laser directed energy deposition process
10.1016/j.applthermaleng.2024.122564 · 2024 · External reference
Development of thermo-mechanical simulation of WC/Inconel 625 metal matrix composites laser cladding and optimization of process parameters
2024 · External reference
Numerical simulation study on the formation mechanism of hydroxyapatite-silver gradient bioactive ceramic coatings under wide-band laser cladding
10.1016/j.optlastec.2023.109412 · 2023 · External reference
Surface-tension of binary metal - surface-active solute systems under conditions relevant to welding metallurgy
10.1007/bf02657748 · 1988 · External reference
Numerical simulation and experimental study on the evolution of multi-field coupling in laser cladding process by disk lasers
10.1007/s40194-019-00725-0 · 2019 · External reference
Numerical simulation of heat transfer and fluid flow during nanosecond pulsed laser processing of Fe78Si9B13 amorphous alloys
10.1016/j.ijheatmasstransfer.2021.121003 · 2021 · External reference
Influence of laser power, scanning speed, and power-to-scanning speed ratio on elemental mixing during laser cladding of sulphur-containing matrix
10.1016/j.aej.2025.12.003 · 2026 · External reference
Multi-physics field coupling and microstructure numerical simulation of laser cladding for engine crankshaft based on CA-FE method and experimental study
10.1016/j.surfcoat.2022.128396 · 2022 · External reference
Element mixing and solidification behavior during multi-track overlapping laser deposition of Cr-based alloys
10.1016/j.ijthermalsci.2025.109890 · 2025 · External reference
Surface-tension of binary metal - surface-active solute systems under conditions relevant to welding metallurgy
10.1007/bf02657748 · ExternalCitation · doi-reference
Numerical simulation and experimental study on the evolution of multi-field coupling in laser cladding process by disk lasers
10.1007/s40194-019-00725-0 · ExternalCitation · doi-reference
Influence of oxygen content on melt pool dynamics in metal additive manufacturing: high-fidelity modeling with experimental validation
10.1016/j.actamat.2023.118824 · ExternalCitation · doi-reference
Influence of laser power, scanning speed, and power-to-scanning speed ratio on elemental mixing during laser cladding of sulphur-containing matrix
10.1016/j.aej.2025.12.003 · ExternalCitation · doi-reference
Evolution of melt pool motion and temperature field based on powder scale modeling during laser directed energy deposition process
10.1016/j.applthermaleng.2024.122564 · ExternalCitation · doi-reference
Investigation of laser cladding using Inconel 625-Enhanced Fe-based coatings: microstructure, wear behavior, and corrosion resistance properties
10.1016/j.apsusc.2025.162398 · ExternalCitation · doi-reference
Electromagnetic effects on the solidification of a metallic alloy droplet impacting onto a surface
10.1016/j.colsurfa.2024.134806 · ExternalCitation · doi-reference
Analytical and numerical investigation of successive metallic alloy droplets impacting onto a surface: regime maps and scaling laws based on energy analysis
10.1016/j.colsurfa.2024.135941 · ExternalCitation · doi-reference
Modeling metal deposition in heat transfer analyses of additive manufacturing processes
10.1016/j.finel.2014.04.003 · ExternalCitation · doi-reference
Multicomponent multiphase modeling of dissimilar laser cladding process with high-speed steel on medium carbon steel
10.1016/j.ijheatmasstransfer.2019.118990 · ExternalCitation · doi-reference
Numerical simulation of heat transfer and fluid flow during nanosecond pulsed laser processing of Fe78Si9B13 amorphous alloys
10.1016/j.ijheatmasstransfer.2021.121003 · ExternalCitation · doi-reference
Scaling laws and numerical modelling of the laser direct energy deposition
10.1016/j.ijheatmasstransfer.2023.124717 · ExternalCitation · doi-reference
A novel model of laser energy attenuation by powder particles for laser solid forming
10.1016/j.ijmachtools.2019.103440 · ExternalCitation · doi-reference
Metallic alloy droplet impact and solidification under an alternating magnetic field: scaling laws and regime maps
10.1016/j.ijthermalsci.2024.109645 · ExternalCitation · doi-reference
Element mixing and solidification behavior during multi-track overlapping laser deposition of Cr-based alloys
10.1016/j.ijthermalsci.2025.109890 · ExternalCitation · doi-reference
Rapid preparation of nanocrystalline high-entropy alloy coating with extremely low dilution rate and excellent corrosion resistance via ultra-high-speed laser cladding
10.1016/j.intermet.2024.108346 · ExternalCitation · doi-reference
Microstructures and high-temperature tensile properties of a Co-Al-W-based superalloy prepared by laser additive manufacturing
10.1016/j.jallcom.2024.178378 · ExternalCitation · doi-reference
Numerical study on the effect of pressure and nozzle dimension on particle distribution and velocity in laser cladding under vacuum base on CFD
10.1016/j.jmapro.2016.05.019 · ExternalCitation · doi-reference
A review of the flow behavior of laser cladding pools based on inclined substrates
10.1016/j.jmapro.2024.04.045 · ExternalCitation · doi-reference
Synchronous optimization of surface flatness and interfacial bonding strength in laser cladding by Marangoni flow
10.1016/j.jmapro.2024.07.043 · ExternalCitation · doi-reference
Study on the visualization of laser cladding molten pool flow field based on attention mechanism
10.1016/j.jmapro.2024.12.034 · ExternalCitation · doi-reference
The influence of sulphur content on the quality of laser cutting of steel
10.1016/j.jmatprotec.2007.04.103 · ExternalCitation · doi-reference
Modeling of solidification process during multi-track laser cladding with 3D cellular automata coupling gas-liquid interface tracking and solute suppression nucleation
10.1016/j.jmatprotec.2023.117927 · ExternalCitation · doi-reference
Numerical simulation and surface morphology of laser cladding of Ni-based C276 alloy coatings on AerMet100 steel surface
10.1016/j.jmrt.2023.10.045 · ExternalCitation · doi-reference
Revealing multiphysics effects on microstructure characteristics in powder-fed laser cladding based on a comprehensive model
10.1016/j.jmrt.2024.02.001 · ExternalCitation · doi-reference
Finite element simulation analysis of flow heat transfer behavior and molten pool characteristics during 0Cr16Ni5Mo1 laser cladding
10.1016/j.jmrt.2024.03.154 · ExternalCitation · doi-reference
Mesoscopic evolution of molten pool during selective laser melting of superalloy Inconel 738 at elevating preheating temperature
10.1016/j.matdes.2021.110355 · ExternalCitation · doi-reference
Numerical simulation study on the formation mechanism of hydroxyapatite-silver gradient bioactive ceramic coatings under wide-band laser cladding
10.1016/j.optlastec.2023.109412 · ExternalCitation · doi-reference
A multiphase modeling for investigating temperature history, flow field and solidification microstructure evolution of FeCoNiCrTi coating by laser cladding
10.1016/j.optlastec.2023.110197 · ExternalCitation · doi-reference
The inclined morphology and molten pool of laser cladding under different cladding methods
10.1016/j.optlastec.2024.111445 · ExternalCitation · doi-reference
Numerical simulation and experimental analysis of thermal conduction and stress in laser cladding repair of thin-walled parts
10.1016/j.optlastec.2024.111897 · ExternalCitation · doi-reference
Modeling of the effect of powder parameters on laser cladding using coaxial nozzle
10.1016/j.surfcoat.2018.12.002 · ExternalCitation · doi-reference
In-situ NbC reinforced Fe-based coating by laser cladding: simulation and experiment
10.1016/j.surfcoat.2021.127027 · ExternalCitation · doi-reference
Multi-physics field coupling and microstructure numerical simulation of laser cladding for engine crankshaft based on CA-FE method and experimental study
10.1016/j.surfcoat.2022.128396 · ExternalCitation · doi-reference
Microstructural evolution and anti-corrosion properties of laser cladded Ti based coating on Q235 steel
10.1016/j.surfcoat.2024.130383 · ExternalCitation · doi-reference
Dynamic evolution of temperature field, flow field, and solidification behavior during multilayer multitrack laser cladding
10.1016/j.surfcoat.2024.131010 · ExternalCitation · doi-reference
Thermal life assessment of laser powder-directed energy deposited NiCrAlY/CuCrZr bimetallic clad for rocket nozzle applications
10.1016/j.surfcoat.2024.131532 · ExternalCitation · doi-reference
The suppression of liquation cracking in the repair process of non-weldable K447A superalloys by laser surface remelting-assisted laser cladding
10.1016/j.surfcoat.2024.131637 · ExternalCitation · doi-reference
Influence of NbC particles on microstructure and wear properties of AlCoCrFeNi2.1 eutectic high-entropy alloy coatings prepared by laser cladding
10.1016/j.surfcoat.2025.131963 · ExternalCitation · doi-reference
Experimental and numerical investigation of the Ti-Ni-Cu coating on AZ91D magnesium alloy by laser surface-modification: the microstructure, wear and corrosion behavior
10.1016/j.triboint.2025.110565 · ExternalCitation · doi-reference
