References

Porous metal for orthopedics implants

10.11138/ccmbm/2013.10.2.111 · 2013 · External reference

The rational design, biofunctionalization and biological properties of orthopedic porous titanium implants: a review

10.3389/fbioe.2025.1548675 · 2025 · External reference

Additively manufactured controlled porous orthopedic joint replacement designs to reduce bone stress shielding: a systematic review

10.1186/s13018-022-03492-9 · 2023 · External reference

Titanium for orthopedic applications: an overview of surface modification to improve biocompatibility and prevent bacterial biofilm formation

10.1016/j.isci.2020.101745 · 2020 · External reference

Lattice structures and functionally graded materials applications in additive manufacturing of orthopedic implants: a review

10.3390/jmmp1020013 · 2017 · External reference

Biocompatibility in orthopedic implants: advancements and challenges

10.26634/jms.12.1.20893 · 2024 · External reference

Biological strategies for improved osseointegration and osteoinduction of porous metal orthopedic implants

10.1089/ten.teb.2014.0333 · 2015 · External reference

Medical applications of porous biomaterials: features of porosity and tissue‐specific implications for biocompatibility

10.1002/adhm.202102087 · 2022 · External reference

Enhanced osseointegration of titanium implants by surface modification with silicon-doped titania nanotubes

10.2147/ijn.s270311 · 2020 · External reference

Role of implants surface modification in osseointegration: a systematic review

10.1002/jbm.a.36829 · 2020 · External reference

A comprehensive review of surface modification techniques for enhancing the biocompatibility of 3D-printed titanium implants

10.3390/coatings13111917 · 2023 · External reference

Porous materials for bone engineering

10.4028/www.scientific.net/msf.250.151 · 1997 · External reference

Additive Manufacturing of Orthopedic Implants

10.1007/978-3-319-89542-0_2 · 2018 · External reference

Innovative 3D printing technologies and advanced materials revolutionizing orthopedic surgery: current applications and future directions

10.3389/fbioe.2025.1542179 · 2025 · External reference

Atomic layer deposition of tantalum oxide films on 3D-printed Ti6Al4V scaffolds with enhanced osteogenic property for orthopedic implants

10.1021/acsbiomaterials.3c00217 · 2023 · External reference

Beyond hype: unveiling the real challenges in clinical translation of 3D printed bone scaffolds and the fresh prospects of bioprinted organoids

10.1186/s12951-024-02759-z · 2024 · External reference

Review of 3D-printed bioceramic/biopolymer composites for bone regeneration: fabrication methods, technologies and functionalized applications

10.1088/1758-5090/adcbd7 · 2025 · External reference

A review on polymers for biomedical applications on hard and soft tissues and prosthetic limbs

10.3390/polym15194034 · 2023 · External reference

Advancement in biomedical implant materials—a mini review

10.3389/fbioe.2024.1400918 · 2024 · External reference

Ceramic materials for biomedical applications: an overview on properties and fabrication processes

10.3390/jfb14030146 · 2023 · External reference

Bioceramic composites for orthopaedic applications: a comprehensive review of mechanical, biological, and microstructural properties

10.1016/j.ceramint.2020.09.214 · 2021 · External reference

Research progress of metal-based additive manufacturing in medical implants

10.1515/rams-2023-0148 · 2023 · External reference

Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering

10.1016/j.addr.2016.04.015 · 2016 · External reference

Perspective Chapter: Additive Manufactured Zirconia-Based Bio-Ceramics for Biomedical Applications

10.5772/intechopen.101979 · 2022 · External reference

Functionalization of TiO2 for better performance as orthopedic implants

10.3390/ma15196868 · 2022 · External reference

Predicting the output dimensions, porosity and elastic modulus of additive manufactured biomaterial structures targeting orthopedic implants

10.1016/j.jmbbm.2019.07.023 · 2019 · External reference

A review on polylactic acid-based blends/composites and the role of compatibilizers in biomedical engineering applications

10.1002/pen.26626 · 2024 · External reference

Polylactic acid bioabsorbable implants of the hand: a review

10.1016/j.jham.2024.100053 · 2024 · External reference

Structural, mechanical, and in-vitro characterization of hydroxyapatite loaded PLA composites

10.1016/j.molstruc.2024.137862 · 2024 · External reference

A comprehensive review of biodegradable synthetic polymer-ceramic composites and their manufacture for biomedical applications

10.1016/j.bioactmat.2018.11.003 · 2019 · External reference

Hydroxyapatite biomaterials: a comprehensive review of their properties, structures, medical applications, and fabrication methods

10.48309/jcr.2024.415051.1253 · 2024 · External reference

The role of bioceramics for bone regeneration: history, mechanisms, and future perspectives

10.3390/biomimetics9040230 · 2024 · External reference

Exploring the frontier of polylactic acid/hydroxyapatite composites in bone regeneration and their revolutionary biomedical applications—a review

10.1177/07316844241278045 · 2026 · External reference

Calcium phosphate ceramic systems in growth factor and drug delivery for bone tissue engineering: a review

10.1016/j.actbio.2011.11.017 · 2012 · External reference

A systematic review of the contribution of additive manufacturing toward orthopedic applications

10.1021/acsomega.4c04870 · 2024 · External reference

Polyetheretherketone and its composites for bone replacement and regeneration

10.3390/polym12122858 · 2020 · External reference

Bone mechanical properties in healthy and diseased states

10.1146/annurev-bioeng-062117-121139 · 2018 · External reference

A review on PLA-based biodegradable materials for biomedical applications

10.1016/j.giant.2024.100261 · 2024 · External reference

Recent advances in metal particle reinforced polylactic acid biocomposites via additive manufacturing for biomedical applications

10.1007/s13369-025-10555-6 · 2026 · External reference

Fabrication and properties of PLA/β-TCP scaffolds using liquid crystal display (LCD) photocuring 3D printing for bone tissue engineering

10.3389/fbioe.2024.1273541 · 2024 · External reference

Fabrication of the porous hydroxyapatite implant by 3D printing

10.36410/jcpr.2013.14.4.513 · 2013 · External reference

Influence of porosity and pore-size distribution in Ti6Al4 V foam on physicomechanical properties, osteogenesis, and quantitative validation of bone ingrowth by micro-computed tomography

10.1021/acsami.7b13960 · 2017 · External reference

Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants

10.1016/j.actbio.2009.11.011 · 2010 · External reference

High-strength, porous additively manufactured implants with optimized mechanical osseointegration

10.1016/j.biomaterials.2021.121206 · 2021 · External reference

Do surface porosity and pore size influence mechanical properties and cellular response to PEEK?

10.1007/s11999-016-4833-0 · 2016 · External reference

Additive manufactured porous biomaterials targeting orthopedic implants: a suitable combination of mechanical, physical and topological properties

10.1016/j.msec.2019.110342 · 2020 · External reference

In vitro and in vivo study of additive manufactured porous Ti6Al4V scaffolds for repairing bone defects

10.1038/srep34072 · 2016 · External reference

Effects of pore interconnectivity on bone regeneration in carbonate apatite blocks

10.1093/rb/rbac010 · 2022 · External reference

An integrated experimental and analytical approach for the analysis of the mechanical interaction between metal porous scaffolds and bone: implications for stress shielding in orthopedic implants

10.3389/fbioe.2025.1562367 · 2025 · External reference

Effects of elastic modulus of porous implants on success rate of implant surgery—an in vivo study using miniature swine model

10.1016/j.matdes.2024.112819 · 2024 · External reference

Additively manufactured gradient porous Ti-6Al-4V hip replacement implants embedded with cell-laden gelatin methacryloyl hydrogels

10.1021/acsami.0c20751 · 2021 · External reference

Optimizing scaffold pore size for tissue engineering: insights across various tissue types

10.3389/fbioe.2024.1444986 · 2024 · External reference

Enhanced osteoblast response to porosity and resolution of additively manufactured Ti-6Al-4V constructs with trabeculae-inspired porosity

10.1089/3dp.2015.0038 · 2016 · External reference

Porous metal implants: processing, properties, and challenges

10.1088/2631-7990/acdd35 · 2023 · External reference

Fabrication methods of porous metals for use in orthopaedic applications

10.1016/j.biomaterials.2005.12.002 · 2006 · External reference

Porous metals in orthopedics

2018 · External reference

Metal material, properties and design methods of porous biomedical scaffolds for additive manufacturing: a review

10.3389/fbioe.2021.641130 · 2021 · External reference

Porous titanium for medical implants

10.62184/mmc.jmmc100020241 · 2024 · External reference

The effect of scaffold architecture on properties of direct 3D fiber deposition of porous Ti6Al4V for orthopedic implants

10.1002/jbm.a.32330 · 2010 · External reference

Fabrication aspects of porous biomaterials in orthopedic applications: a review

10.1021/acsbiomaterials.7b00615 · 2018 · External reference

A pore way to heal and regenerate: 21st century thinking on biocompatibility

10.1093/rb/rbw006 · 2016 · External reference

Utilizing biomaterial surface properties to improve orthopedic hip implant safety and function in a safe-by-design approach

10.3389/fbioe.2025.1504883 · 2025 · External reference

Biocompatibility issues with modern implants in bone—a review for clinical orthopedics

10.2174/1874325000802010066 · 2008 · External reference

A review of the biocompatibility of implantable devices: current challenges to overcome foreign body response

10.1177/193229680800200610 · 2008 · External reference

Unraveling and harnessing the immune response at the cell–biomaterial interface for tissue engineering purposes

10.1002/adhm.202301939 · 2024 · External reference

Porous scaffolds for bone regeneration

10.1016/j.jsamd.2020.01.007 · 2020 · External reference

Controlling porous titanium/soft tissue interactions with an innovative surface chemical treatment: responses of macrophages and fibroblasts

10.1016/j.msec.2020.110845 · 2020 · External reference

Role of surface quality on biocompatibility of implants—a review

10.1016/j.stlm.2022.100082 · 2022 · External reference

Assessing microstructural, biomechanical, and biocompatible properties of TiNb alloys for potential use as load-bearing implants

10.3390/jfb15090253 · 2024 · External reference

Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: a review

10.1016/j.bioactmat.2018.12.003 · 2019 · External reference

Porous metal materials for applications in orthopedic field: a review on mechanisms in bone healing

10.1016/j.jot.2024.08.003 · 2024 · External reference

Osseointegration of functionally-graded Ti6Al4V porous implants: histology of the pore network

10.1016/j.bioadv.2023.213697 · 2023 · External reference

Applications of 3D printing technology in orthopedic treatment

10.1155/2021/9892456 · 2021 · External reference

Three-dimensional printing in orthopaedic surgery: current applications and future developments

10.5435/jaaosglobal-d-20-00230 · 2021 · External reference

Laser sintering approaches for bone tissue engineering

10.3390/polym14122336 · 2022 · External reference

Three-dimensional printing methods for bioceramic-based scaffold fabrication for craniomaxillofacial bone tissue engineering

10.3390/jfb15030060 · 2024 · External reference

Introduction to fused deposition modeling

2021 · External reference

Fused filament printing of specialized biomedical devices: a state-of-the art review of technological feasibilities with PEEK

10.1108/rpj-06-2020-0139 · 2021 · External reference

Basics of fused deposition modelling (FDM)

10.1007/978-3-030-48259-6_1 · 2020 · External reference

Challenges of fused deposition modeling 3D printing in pharmaceutical applications: where are we now?

10.1016/j.addr.2021.05.020 · 2021 · External reference

Revolutionizing biomedical engineering: extrusion-based hydroxyapatite printing for scaffold construction: a review

10.1016/j.hybadv.2024.100227 · 2024 · External reference

Advancements and limitations in 3D printing materials and technologies: a critical review

10.3390/polym15112519 · 2023 · External reference

Research on application of SLA technology in the 3D printing technology

10.4028/www.scientific.net/amm.401-403.938 · 2013 · External reference

Additive manufacturing technologies with emphasis on stereolithography 3D printing in pharmaceutical and medical applications: a review

10.1016/j.ijpx.2023.100159 · 2023 · External reference

Compatibility analysis of 3D printer resin for biological applications

10.1049/mnl.2016.0530 · 2016 · External reference

3D printing of ceramics: advantages, challenges, applications, and perspectives

10.1111/jace.20043 · 2024 · External reference

Binder jetting: a review of process, materials, and methods

10.1016/j.addma.2019.05.031 · 2019 · External reference

Metal binder jetting additive manufacturing: a literature review

10.1115/1.4047430 · 2020 · External reference

Method of formulating geopolymer for 3D printing for construction applications

10.1016/j.matdes.2016.07.136 · 2016 · External reference

Microstructural development during additive manufacturing of biomedical grade Ti-6Al-4V alloy by three-dimensional binder jetting: material aspects and mechanical properties

10.1007/s00170-023-11661-1 · 2023 · External reference

Additive manufacturing processes: selective laser melting, electron beam melting and binder jetting—selection guidelines

10.3390/ma10060672 · 2017 · External reference

3D printing of polymer matrix composites: a review and prospective

10.1016/j.compositesb.2016.11.034 · 2017 · External reference

3D-printing technologies for electrochemical applications

10.1039/c5cs00714c · 2016 · External reference

Sterility of 3D-printed orthopedic implants using fused deposition modeling

10.3928/01477447-20191031-07 · 2020 · External reference

Unresolved reference

2023 · External reference

Materials for 3D printing in healthcare sector: a review

10.1177/09544119241289731 · 2024 · External reference

Stereolithography (SLA): An Innovative Additive Manufacturing Process

10.5281/zenodo.14016091 · 2024 · External reference

Improved biocompatibility in laser-polished implants

10.3390/biomimetics9100642 · 2024 · External reference

Insights into the future of manufacturing and designing NiTi-Cu shape memory alloys with powder sintering-based process binder jet additive manufacturing: a short review

10.1007/s40830-025-00538-9 · 2025 · External reference

Effect of FDM process parameters on the mechanical properties of CFR-PEEK

10.1007/s12008-022-00944-8 · 2019 · External reference

Binder jetting additive manufacturing of hydroxyapatite powders: effects of adhesives on geometrical accuracy and green compressive strength

10.1016/j.addma.2020.101645 · 2020 · External reference

Comparative analysis of 3D printing technologies (FDM and SLA) for the production of complex geometry parts

2024 · External reference

Evaluation and validation of the shape accuracy of FDM fabricated medical models

10.4028/www.scientific.net/amr.83-86.275 · 2009 · External reference

Application and evaluation of fused deposition modeling technique in customized medical products

10.1016/j.ijpharm.2023.122999 · 2023 · External reference

The application and challenge of binder jet 3D printing technology in pharmaceutical manufacturing

10.3390/pharmaceutics14122589 · 2022 · External reference

Study of microstructure and mechanical properties of 17–4 PH stainless steel produced via binder jetting

10.1080/00325899.2023.2202950 · 2023 · External reference

Effect of feedstock bimodal powder mixture and infiltration process on mechanical behaviour of binder jetting processed 316L stainless steel

10.1080/00325899.2023.2213005 · 2023 · External reference

Secondary stability achieved in dental implants with a calcium-coated sandblasted, large-grit, acid-etched (SLA) surface and a chemically modified SLA surface placed without mechanical engagement: a preclinical study

10.1111/clr.13848 · 2021 · External reference

The biocompatibility of SLA-treated titanium implants

10.1088/1748-6041/3/2/025011 · 2008 · External reference

Investigation of mechanical and biological properties of FDM 3D-printed PLA scaffolds with radial gradient porosity for tissue engineering

10.21203/rs.3.rs-944744/v1 · 2021 · External reference

Enhancing NiTi implants through binder jetting: microstructure, impurity control, and post-processing optimization

10.31399/asm.cp.smst2024p0016 · 2024 · External reference

Enhancing mechanical performance of hydroxyapatite-based bone implants via citric acid post-processing in binder jetting additive manufacturing

10.1088/1748-605x/ad7566 · 2024 · External reference

Evaluation of biocompatibility and osseointegration of multi‐component TiAl6V4 titanium alloy implants

10.1002/jor.25974 · 2024 · External reference

Comparison of osseointegration in novel laser-textured and SLA implants

10.5455/aim.2023.31.137-140 · 2023 · External reference

Biological and biomechanical properties of chemically modified SLA titanium implants in vitro and in vivo

10.4028/www.scientific.net/kem.309-311.399 · 2006 · External reference

Improved osseointegration of long-term stored SLA implant by hydrothermal sterilization

10.1016/j.jmbbm.2015.08.038 · 2016 · External reference

Biocompatibility characterization of cryogenically treated FDM printed thermoplastic polyurethane

10.1016/j.matpr.2023.09.049 · 2023 · External reference

Cost and benefit analysis of fused deposition modelling (FDM) technique and selective laser sintering (SLS) for fabrication of customised foot orthoses

2009 · External reference

Market and application review of large scale additive manufacturing

2024 · External reference

Binder jetting additive manufacturing comparative study

10.1088/1742-6596/2616/1/012002 · 2023 · External reference

3D-printed medical implants: recent trends and challenges

10.1007/s44174-024-00221-0 · 2024 · External reference

An overview of 3D printed metal implants in orthopedic applications: present and future perspectives

10.1016/j.heliyon.2023.e17718 · 2023 · External reference

Material–structure integrated design for ultra-broadband all-dielectric metamaterial absorber

10.1088/1361-648x/ac431e · 2021 · External reference

Dynamic topology optimization of 3D-printed transtibial orthopedic implant using tunable isotropic porous metamaterials

10.1016/j.jmbbm.2024.106479 · 2024 · External reference

Integrating artificial intelligence in orthopedic care: advancements in bone care and future directions

10.3390/bioengineering12050513 · 2025 · External reference

Sensor‐enabled orthopedic implants for musculoskeletal monitoring

10.1002/adsr.202400138 · 2025 · External reference

Smart implants in orthopedic surgery, improving patient outcomes: a review

10.2147/ieh.s133518 · 2018 · External reference

The application and the development of 3D printing technology in biosensors

10.1007/978-981-95-7538-1_6 · 2026 · External reference

Research on the application of additive manufacturing technology in precision electronic components

10.1007/978-981-95-7538-1_23 · 2026 · External reference

Review: 3D printing techniques, materials and applications in zinc-air and zinc-ion batteries

10.1007/s10853-026-12794-w · 2026 · External reference

3D printing of LFP and graphene-based electrodes via DIW and FDM for high-performance energy storage devices: opportunities and perspectives

10.1016/j.jiec.2026.06.035 · 2026 · External reference

Near-infrared smart responsive orthopedic implants with synergistic antimicrobial and bone integration-promoting properties

10.1016/j.jot.2025.03.015 · 2025 · External reference

Unresolved reference

2017 · External reference

Biological evaluation of medical devices—part 1: evaluation and testing within a risk management process

2018 · External reference

FROM thermoformed to directly printed and 4D clear aligners: a critical narrative review of materials, manufacturing variables and clinical translation

10.1007/s40964-026-01776-8 · 2026 · External reference

Medical devices—Quality management systems—requirements for regulatory purposes

2016 · External reference

Additive manufacturing of metal load-bearing implants 2: surface modification and clinical challenges

10.1002/cite.202300172 · 2024 · External reference

Unresolved reference

2017 · External reference

Current status and challenges of additive manufacturing in orthopaedics: an overview

10.1016/j.jcot.2018.05.008 · 2019 · External reference