Research graph
References from Investigation of crack initiation, and mechanical behavior of polypropylene and polymer-based composites under plastic deformation in automotive brake fluid reservoirs. Local targets link to admitted publications; unresolved targets remain external evidence.
Polypropylene film.
10.1007/978-981-96-3029-5_2 · 2025 · External reference
Research and application of polypropylene: a review
10.1186/s11671-023-03952-z · 2024 · External reference
Structure-property relationship in isotactic polypropylene under contrasting processing conditions
10.3390/polym17141889 · 2025 · External reference
Unresolved reference
External reference
Unresolved reference
2019 · External reference
Polypropylene compounds for automotive applications
2010 · External reference
An overview of hydraulic brake fluid contamination.
2019 · External reference
Measurement of brake fluid boiling point
2025 · External reference
Research on and analysis of brake fluid impact on brake system performance
2025 · External reference
Failure locus of an ABS-based compound manufactured through photopolymerization
10.3390/polym14183822 · 2022 · External reference
A methodology to predict the fatigue life under multi-axial loading of carbon fiber-reinforced polymer composites considering anisotropic mechanical behavior
10.3390/ma16051952 · 2023 · External reference
Triaxial mechanical properties and mechanism of waterborne polyurethane-reinforced road demolition waste as road bases
10.3390/polym14132725 · 2022 · External reference
Effects of stress triaxiality ratio on the heat build-up of polyamide 11 under loading
10.1016/j.mechmat.2020.103375 · 2020 · External reference
Effect of triaxial stress constraint on the deformation and fracture of polymers
10.1007/bf02486573 · 2002 · External reference
A major leak in a crude oil tank: Predictable and unexpected root causes
2019 · External reference
Triaxiality and plastic-strain-dependent proposed PEAK parameter for predicting crack formation in polypropylene polymer reservoir subjected to pressure load
10.3390/polym16152128 · 2024 · External reference
Correlation of material and processing time scales with structure development in isotactic polypropylene crystallization
10.1021/ma025948n · 2003 · External reference
Environmental toxicity and decomposition of polyethylene
10.1016/j.ecoenv.2022.113933 · 2022 · External reference
A comprehensive review of the recent developments in thermoplastics and rubber blends-based composites and nanocomposites
10.1002/pc.27712 · 2023 · External reference
The influence of the water level in the brake fluid on the rate of increase in temperature and boiling point of the brake fluid.
2020 · External reference
Disc brakes for heavy vehicles: an experimental study of temperatures and cracks
10.1177/0954407014550843 · 2015 · External reference
Influence of injection molding parameters and distance from gate on the mechanical properties of injection-molded polypropylene
10.3390/polym17081012 · 2025 · External reference
Enhancing the fire resistance of ablative materials: role of the polymeric matrix and silicon carbide reinforcement
10.3390/polym16172454 · 2024 · External reference
Thermochemical and microstructural assessment of polypropylene modified asphalt concrete for sustainable pavement applications
10.1007/s44290-025-00350-5 · 2025 · External reference
Mechanical and thermal properties of polypropylene, polyoxymethylene and poly(methyl methacrylate) modified with adhesive resins
10.3390/jcs8100384 · 2024 · External reference
Effect of filler treatments on the crystallization, mechanical properties, morphologies and heat resistance of polypropylene/phlogopite composites
2019 · External reference
Preparation and mechanical properties of polypropylene / montmorillonite nanocomposites - After grafted with hard/soft grafting agent
10.1016/j.icheatmasstransfer.2010.12.030 · 2011 · External reference
Unresolved reference
1998 · External reference
Unresolved reference
External reference
Advances and applications of metal-polymer hybrid for load-bearing body-in-white structural components: a comprehensive review
10.1007/s00170-024-13792-5 · 2024 · External reference
Mechanical and physical properties of PP and HDPE
10.11648/j.es.20190402.12 · 2019 · External reference
Thermal performance analysis of integrated energy management system for mold cooling/heat pump/material preheating of injection-molding machine
10.3390/sym17050637 · 2025 · External reference
Overview of injection molding technology for processing polymers and their composites
2020 · External reference
Injection molding manufacturing process: review of case-based reasoning applications
10.1007/s10845-019-01481-0 · 2020 · External reference
A comprehensive study of energy conservation in electric-hydraulic injection-molding equipment
10.3390/en10111768 · 2017 · External reference
Advanced Injection Molding Methods: Review
10.3390/ma16175802 · 2023 · External reference
Process parameter optimization of plastic injection molding: a review
10.1007/s12588-015-9115-2 · 2015 · External reference
Preparation of polypropylene single-polymer composites by injection molding
10.1002/app.39411 · 2013 · External reference
Unresolved reference
External reference
Injection Molding Process Optimization of Polypropylene using Orthogonal Experiment Method Based on Tensile Strength
10.1088/1757-899x/612/3/032102 · 2019 · External reference
Advancements in welding technology: a comprehensive review of techniques, materials, and applications
2025 · External reference
The temperature distribution during heating in hot plate welding process
10.1051/matecconf/201925402033 · 2019 · External reference
Principles of joining of thermoplastics by welding and technological innovations–Part 1
2012 · External reference
Modeling the interrelationship between the parameters for improving weld strength in plastic hot plate welding: A DEMATEL approach
10.1177/0095244318824779 · 2019 · External reference
A correlation between the variable melt flow index and the molecular mass distribution of virgin and recycled polypropylene used in the manufacturing of battery cases
10.1016/j.polymertesting.2013.09.009 · 2013 · External reference
Melt flow Index (MFI) analysis of sago based thermoplastic starch blend with polypropylene and polyethylene
2023 · External reference
Research on Temperature and Humidity Decoupling Control of Constant Temperature and Humidity Test Chamber
10.1088/1757-899x/711/1/012104 · 2020 · External reference
Unresolved reference
External reference
Preparation of polypropylene single-polymer composites by injection molding
10.1002/app.39411 · ExternalCitation · doi-reference
A comprehensive review of the recent developments in thermoplastics and rubber blends-based composites and nanocomposites
10.1002/pc.27712 · ExternalCitation · doi-reference
Polypropylene film.
10.1007/978-981-96-3029-5_2 · ExternalCitation · doi-reference
Effect of triaxial stress constraint on the deformation and fracture of polymers
10.1007/bf02486573 · ExternalCitation · doi-reference
Advances and applications of metal-polymer hybrid for load-bearing body-in-white structural components: a comprehensive review
10.1007/s00170-024-13792-5 · ExternalCitation · doi-reference
Injection molding manufacturing process: review of case-based reasoning applications
10.1007/s10845-019-01481-0 · ExternalCitation · doi-reference
Process parameter optimization of plastic injection molding: a review
10.1007/s12588-015-9115-2 · ExternalCitation · doi-reference
Thermochemical and microstructural assessment of polypropylene modified asphalt concrete for sustainable pavement applications
10.1007/s44290-025-00350-5 · ExternalCitation · doi-reference
Environmental toxicity and decomposition of polyethylene
10.1016/j.ecoenv.2022.113933 · ExternalCitation · doi-reference
Preparation and mechanical properties of polypropylene / montmorillonite nanocomposites - After grafted with hard/soft grafting agent
10.1016/j.icheatmasstransfer.2010.12.030 · ExternalCitation · doi-reference
Effects of stress triaxiality ratio on the heat build-up of polyamide 11 under loading
10.1016/j.mechmat.2020.103375 · ExternalCitation · doi-reference
A correlation between the variable melt flow index and the molecular mass distribution of virgin and recycled polypropylene used in the manufacturing of battery cases
10.1016/j.polymertesting.2013.09.009 · ExternalCitation · doi-reference
Correlation of material and processing time scales with structure development in isotactic polypropylene crystallization
10.1021/ma025948n · ExternalCitation · doi-reference
The temperature distribution during heating in hot plate welding process
10.1051/matecconf/201925402033 · ExternalCitation · doi-reference
Injection Molding Process Optimization of Polypropylene using Orthogonal Experiment Method Based on Tensile Strength
10.1088/1757-899x/612/3/032102 · ExternalCitation · doi-reference
Research on Temperature and Humidity Decoupling Control of Constant Temperature and Humidity Test Chamber
10.1088/1757-899x/711/1/012104 · ExternalCitation · doi-reference
Mechanical and physical properties of PP and HDPE
10.11648/j.es.20190402.12 · ExternalCitation · doi-reference
Modeling the interrelationship between the parameters for improving weld strength in plastic hot plate welding: A DEMATEL approach
10.1177/0095244318824779 · ExternalCitation · doi-reference
Disc brakes for heavy vehicles: an experimental study of temperatures and cracks
10.1177/0954407014550843 · ExternalCitation · doi-reference
Research and application of polypropylene: a review
10.1186/s11671-023-03952-z · ExternalCitation · doi-reference
A comprehensive study of energy conservation in electric-hydraulic injection-molding equipment
10.3390/en10111768 · ExternalCitation · doi-reference
Mechanical and thermal properties of polypropylene, polyoxymethylene and poly(methyl methacrylate) modified with adhesive resins
10.3390/jcs8100384 · ExternalCitation · doi-reference
A methodology to predict the fatigue life under multi-axial loading of carbon fiber-reinforced polymer composites considering anisotropic mechanical behavior
10.3390/ma16051952 · ExternalCitation · doi-reference
Advanced Injection Molding Methods: Review
10.3390/ma16175802 · ExternalCitation · doi-reference
Triaxial mechanical properties and mechanism of waterborne polyurethane-reinforced road demolition waste as road bases
10.3390/polym14132725 · ExternalCitation · doi-reference
Failure locus of an ABS-based compound manufactured through photopolymerization
10.3390/polym14183822 · ExternalCitation · doi-reference
Triaxiality and plastic-strain-dependent proposed PEAK parameter for predicting crack formation in polypropylene polymer reservoir subjected to pressure load
10.3390/polym16152128 · ExternalCitation · doi-reference
Enhancing the fire resistance of ablative materials: role of the polymeric matrix and silicon carbide reinforcement
10.3390/polym16172454 · ExternalCitation · doi-reference
Influence of injection molding parameters and distance from gate on the mechanical properties of injection-molded polypropylene
10.3390/polym17081012 · ExternalCitation · doi-reference
Structure-property relationship in isotactic polypropylene under contrasting processing conditions
10.3390/polym17141889 · ExternalCitation · doi-reference
Thermal performance analysis of integrated energy management system for mold cooling/heat pump/material preheating of injection-molding machine
10.3390/sym17050637 · ExternalCitation · doi-reference
