References

Promoting sustainability through water hydraulic technology—the effect of water hydraulic in industrial scissor lift

10.4028/www.scientific.net/amm.315.488 · 2013 · External reference

The difference in tribological characteristics between CFRPEEK and stainless steel under water lubrication in friction testing machine and axial piston pump

10.3390/lubricants11040158 · 2023 · External reference

Effect of materials on the noise of a water hydraulic pump used in submersible

10.1016/j.oceaneng.2016.12.022 · 2017 · External reference

Experimental investigation and theoretical evaluation on the leakage mechanisms of seawater hydraulic axial piston pump under sea depth circumstance

10.1016/j.engfailanal.2022.106848 · 2022 · External reference

A hybrid of CFD and PSO optimization design method of the integrated slipper/swashplate structure in seawater hydraulic axial piston pump

10.1080/19942060.2022.2132421 · 2022 · External reference

Development of a friction test apparatus for simulating the ultra-high pressure environment of the deep ocean

10.1016/j.wear.2020.203294 · 2020 · External reference

Wear failure analysis of suction valve for high pressure and large flow water hydraulic plunger pump

10.1016/j.engfailanal.2022.106095 · 2022 · External reference

A review of the influence of environmental humidity and water on friction, lubrication and wear

10.1016/0301-679x(90)90053-r · 1990 · External reference

Effect of oil temperature on tribological behavior of a lubricated steel−steel contact

10.1016/j.wear.2015.01.064 · 2015 · External reference

Inhibition of water-accelerated rolling-contact fatigue

10.1115/1.3451546 · 1971 · External reference

Water deteriorates lubricating oils: Removal of water in lubricating oils using a robust superhydrophobic membrane

10.1039/d0nr03305g · 2020 · External reference

Understanding the effect of water on the transient decomposition of zinc dialkyldithiophosphate (ZDDP)

10.1016/j.triboint.2021.106855 · 2021 · External reference

Additives depletion by water contamination and its influences on engine oil performance

10.1007/s11249-024-01876-y · 2024 · External reference

An assessment of the effect of relative humidity on the decomposition of the ZDDP antiwear additive

10.1007/s11249-021-01446-6 · 2021 · External reference

XPS analysis on the influence of water on the evolution of zinc dialkyldithiophosphate-derived reaction layer in lubricated rolling contacts

10.1002/sia.4853 · 2012 · External reference

A robust membrane with dual superlyophobicity for solving water-caused lubricant deterioration and water contamination

10.1007/s40544-022-0677-7 · 2023 · External reference

Effects of water and oxygen during rolling contact lubrication

10.1016/0043-1648(68)90536-x · 1968 · External reference

Boundary lubrication behavior and mechanism analysis of oil–water emulsion

10.3901/jme.2019.09.048 · 2019 · External reference

An experimental study on the flow characteristics for oil-Water Emulsions

2005 · External reference

Friction behavior of oil film bearing in oil–water two-phase flow lubricated rolling mill

2016 · External reference

Lubricating properties of water in oil emulsions

10.1115/1.2164464 · 2006 · External reference

Evaluation of microhardness, tribological properties, and corrosion resistance of CrFeNiNbTi high-entropy alloy coating deposited by laser cladding

10.1007/s11665-021-06107-2 · 2021 · External reference

The effect of temperature on the unlubricated sliding wear of 5 CrNiMo steel against 40 MnB steel in the range 400–600 °C

10.1016/s0301-679x(98)00039-5 · 1998 · External reference

Structural characteristics and sliding friction properties of 40CrNiMo steel after broadband laser hardening

10.3390/coatings11111282 · 2021 · External reference

Friction and wear behaviors of steel/bronze tribopairs lubricated by oil with serpentine natural mineral additive

10.1016/j.wear.2020.203387 · 2020 · External reference

An investigation on the tribological behaviors of steel/copper and steel/steel friction pairs via lubrication with a graphene additive

10.1007/s40544-019-0327-x · 2021 · External reference

Study on the microorganization and wear resistance of complex brass and silicon manganese brass in the key friction pair of plunger pump

2025 · External reference

Wear products and tribochemical reactions during friction of a brass–steel pair

10.1016/j.wear.2020.203517 · 2020 · External reference

Effect of different atmospheres on dry friction behavior of steel sliding against brass at high speed

10.1007/s11434-009-0575-7 · 2009 · External reference

The effect of oxygen on the tribological behavior of CrNiMo steel

10.1108/00368791211208660 · 2012 · External reference

An experimental study of the tribological behaviour of the brass/steel pair

10.1016/s0924-0136(99)00491-4 · 2000 · External reference

Impact of oil-in-water emulsion composition and preparation method on emulsion physical properties and friction behaviors

10.1007/s11249-014-0393-1 · 2014 · External reference

Materials screening of matching pairs in a water hydraulic piston pump

10.1108/00368790910953695 · 2009 · External reference

Investigation of microstructural, hardness, and wear properties of AlCrCuFeNi high entropy alloys produced by hot-pressing with the enhancement of manufacturability through electroless Ag incorporation

10.1016/j.triboint.2024.110277 · 2025 · External reference

Study of the liquid resistance effect of water-in-oil emulsions in porous media

10.1016/j.petsci.2024.07.019 · 2024 · External reference

Water-in-oil Pickering emulsions stabilized solely by a naturally occurring steroidal sapogenin: Diosgenin

10.1016/j.foodres.2021.110573 · 2021 · External reference

Water droplets in oil at the inlet of an EHD contact: A dual experimental and numerical investigation

10.1016/j.triboint.2022.108015 · 2023 · External reference

Phase behavior of Pickering emulsions stabilized by graphene oxide sheets and resins

10.1021/acs.energyfuels.7b02672 · 2017 · External reference

Infrared spectroscopic analysis of the composition of an oil/water interfacial film

10.1021/acs.energyfuels.7b01022 · 2017 · External reference

The acid test for water structure

10.1038/nchem.2465 · 2016 · External reference

Base lubricants for green stamping: The effects of their structure and viscosity on tribological performance

10.1007/s40544-022-0706-6 · 2023 · External reference

Improving tribological performance of electrified steel interfaces in e-mobility systems using ash-sulfur-less oil additives based on amine salts-phosphoric esters

10.1016/j.triboint.2025.110561 · 2025 · External reference

Friction and wear study for the new method of laser-induced cavitation micro-texturing on 7050 aluminum alloy

10.1016/j.matdes.2025.113796 · 2025 · External reference

Tribological behavior of femtosecond laser-textured leaded brass

10.1016/j.triboint.2021.107115 · 2021 · External reference

Influence of the gas environment on the transferred film of the brass (Cu64Zn36)/steel AISI 1045 couple

10.1016/j.wear.2008.12.059 · 2009 · External reference

Effect of tempering conditions on microstructure evolution and sliding wear behaviour of continuously cooled carbide-free bainitic steel

10.1016/j.triboint.2025.110519 · 2025 · External reference

Exploring viscosity metrics for hydrogen-bond dominated liquid superlubricity using ionic liquid analogue models

10.1016/j.colsurfa.2025.136614 · 2025 · External reference

Coefficient of friction of dry sliding Al6061-T6 alloy under different loading conditions

10.1108/wje-06-2020-0212 · 2021 · External reference

Lubricated wear behavior of leaded α+β brass

10.1016/j.triboint.2011.12.016 · 2012 · External reference

Influence of iron dilution on plastic deformation mechanisms in cobalt-based alloys: Consequence of phase transformations on tribological behavior

10.1016/j.wear.2023.204845 · 2023 · External reference

Microstructure and texture development in (FeCoCrNi)94Al2Ti4 alloy processed by asymmetric hot-rolling

10.1016/j.jmrt.2024.12.220 · 2025 · External reference

MXene/Biomass-derived activated carbon composite for supercapacitor applications

10.1016/j.carbon.2025.120101 · 2025 · External reference

In situ atmospheric cold micro-PECVD of uniform superhydrophobic silica on internal surface of tubes for improving anti-corrosion and anti-impact behaviors

10.1016/j.surfcoat.2024.131640 · 2025 · External reference

Tribological and micro-milling performance of surfactant-free microwave plasma-modified Al2O3 nanoparticles biodegradable lubricants

10.1016/j.jclepro.2025.144969 · 2025 · External reference

Fe-doped Co3O4 anchored on hollow carbon nanocages for efficient electrocatalytic oxygen evolution

10.1016/s1872-5813(22)60080-x · 2023 · External reference

Preparation of Sn-doped Ga2O3 thin films and their solar-blind photoelectric detection performance

10.1088/1674-4926/44/6/062805 · 2023 · External reference

Study the outdoor corrosion performance of Sn- and Mo-additional low alloy steel based on big data technology

10.1016/j.jmrt.2025.01.105 · 2025 · External reference

Nanocrystalline iron pyrophosphate-regulated amorphous phosphate overlayer for enhancing solar water oxidation

10.1007/s40820-022-00955-w · 2022 · External reference

Corrosion behavior of 2205 duplex stainless steel in NaCl solutions containing sulfide ions

10.1016/j.corsci.2022.110240 · 2022 · External reference

Extracellular polysaccharides of Tenacibaculum mesophilum D-6 play a major role during its corrosion protection for X80 carbon steel in seawater

10.1016/j.corsci.2025.112811 · 2025 · External reference

Corrosion inhibition of steel in 3.5% NaCl by rice straw extract

10.1016/j.jiec.2018.10.030 · 2019 · External reference

Corrosion fatigue crack initiation and initial propagation mechanism of E690 steel in simulated seawater

10.1016/j.msea.2017.09.078 · 2017 · External reference

Corrosion behaviour of a quenched and partitioned medium carbon steel in 3.5 wt% NaCl solution

10.1016/j.corsci.2017.10.027 · 2018 · External reference

Contact and rubbing of flat surfaces

10.1063/1.1721448 · 1953 · External reference

The effects of simultaneous laser nitriding and texturing on surface hardness and tribological properties of Ti6Al4V

10.1016/j.surfcoat.2022.128358 · 2022 · External reference

Significant efficiency improvement of conventional tempering by a novel flash tempering technique

10.1016/j.jmrt.2023.06.153 · 2023 · External reference

Localized corrosion of low-carbon steel at the nanoscale

10.1038/s41529-019-0078-1 · 2019 · External reference

Effect of tempering temperature on hydrogen embrittlement of SCM440 tempered martensitic steel

10.3390/ma16165709 · 2023 · External reference

Hot pack rolling nearly lamellar Ti–44Al–8Nb–(W, B, Y) alloy with different rolling reductions: Lamellar colonies evolution and tensile properties

10.1016/j.matdes.2017.02.053 · 2017 · External reference

Evolution of microstructures, dislocation density and arrangement during deformation of low carbon lath martensitic steels

10.1016/j.msea.2020.139039 · 2020 · External reference

Dynamic hardness evolution in metals from impact induced gradient dislocation density

10.1016/j.actamat.2023.118807 · 2023 · External reference

The combined influence of grain size distribution and dislocation density on hardness of interstitial free steel

10.1016/j.jmst.2019.11.025 · 2020 · External reference

A novel Ni–Mo–W–V martensitic steel for hot working dies: Improved elevated-temperature mechanical properties and wear resistance via thermally stable MC nanoprecipitates

10.1016/j.triboint.2025.110618 · 2025 · External reference

Basics of mixed lubrication

10.1002/ls.3010160102 · 2003 · External reference

Molecular dynamics simulation of the stribeck curve: Boundary lubrication, mixed lubrication, and hydrodynamic lubrication on the atomistic level

10.1007/s40544-023-0745-y · 2023 · External reference

Influence of external magnetic field on the tribological performance of magnetic fluids in different lubrication regimes

10.26599/frict.2025.9440979 · 2025 · External reference

EHL line contact central and minimum film thickness equations for lubricants with linear piezoviscous behavior

10.1016/j.triboint.2011.05.009 · 2011 · External reference

Passivity breakdown of high purity iron and AISI 4340 steel in 0.5M NaCl solution

10.1016/0010-938x(76)90115-3 · 1976 · External reference