References

Unresolved reference

External reference

Understanding and modeling of gain boundary pinning in Inconel718

2012 · External reference

Selective growth of low stored energy grains during δ sub-solvus annealing in the inconel 718 nickel-based superalloy

10.1007/s11661-015-3035-9 · 2015 · External reference

Heat treatments of Inconel 718 nickel-based superalloy: a Review

10.1007/s12540-024-01812-8 · 2025 · External reference

Characterization of recrystallization and second-phase particles in solution-treated additively manufactured alloy 718

10.1007/s11661-019-05560-y · 2020 · External reference

The recrystallization process in some polycrystalline metals

10.1098/rspa.1962.0080 · 1962 · External reference

A combined approach to solving applied metal forming problems

10.3390/cryst15020101 · 2025 · External reference

Influence of alloying and certain structural factors on the set of characteristics of disk billets made of granulated heat-resistant nickel alloys EP741NP, VZh750P, VZh751P, VZh752P and VZh753P

2019 · External reference

On the notch sensitivity of disk granulated heat-resistant nickel alloys

10.24412/0321-4664-2023-1-33-49 · 2023 · External reference

Distribution of alloying element atoms between γ- and γ’-Phase particles in a heat-resistant nickel alloy

10.1134/s0031918x22020028 · 2022 · External reference

Fatigue stress analysis of the DV-2 engine turbine disk

10.1108/aeat-03-2018-0096 · 2019 · External reference

Microstructural characterization of coatings produced by selective laser melting of Ni-Powder on titanium alloy substrate

10.18178/ijmerr.9.7.954-959 · 2020 · External reference

Fine grains within narrow temperature range by tuning strain-induced boundary migration dominated recrystallization for selective laser melted inconel 718

10.1016/j.scriptamat.2022.114882 · 2022 · External reference

Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline inconel 718

10.1016/j.ijfatigue.2018.04.018 · 2018 · External reference

Study on creep properties and deformation mechanisms of novel nickel‐based deposited metal

10.1002/adem.202500182 · 2025 · External reference

The influence of the starting grain size during high-temperature grain boundary engineering of Ni-Base superalloy RR1000

10.1002/9781119075646.ch49 · 2016 · External reference

Ex-situ observation of the short crack initiation and propagation behaviour of nickel-base wrought alloy inconel 718 for critical rotating components under fatigue conditions at elevated temperatures

10.1016/j.engfracmech.2024.109850 · 2024 · External reference

Elasto-plastic deformation analysis of rotating disc beyond its limit speed

10.1016/j.ijpvp.2011.11.001 · 2012 · External reference

An efficient mesh-free approach for the determination of stresses intensity factors

10.1016/j.enganabound.2021.08.001 · 2021 · External reference

The welding and brazing of alloy 718

1964 · External reference

Effect of residual stress induced by different cooling methods in heat treatment on the fatigue crack propagation behaviour of GH4169 disc

10.3390/ma15155228 · 2022 · External reference

Topology optimization of a gas-turbine engine part

10.1088/1757-899x/177/1/012077 · 2017 · External reference

Deformation-mechanism maps: the plasticity and creep of metals and ceramics

1982 · External reference

Fatigue resistance of the grain size transition zone in a dual microstructure superalloy disk

10.1016/j.ijfatigue.2010.09.022 · 2011 · External reference

A review of microstructure phenomena during manufacture of polycrystalline Ni-based superalloys

10.1080/02670836.2022.2069332 · 2022 · External reference

Effect of thermomechanical treatment on the formation of gradient structure and mechanical properties in a disk made of powder-metallurgy nickel-based superalloy

10.1134/s0031918x19040057 · 2019 · External reference

Theory of crystallization and technology of granulated heat-resistant nickel alloys

2016 · External reference

Unresolved reference

External reference

The effect of dual microstructure heat treatment on an advanced nickel-base disk alloy

10.7449/2004/superalloys_2004_323_329 · 2004 · External reference

A crystal plasticity model incorporating the effects of precipitates in superalloys: application to tensile, compressive, and cyclic deformation of inconel 718

10.1016/j.ijplas.2017.09.006 · 2017 · External reference

Microstructural impact on fatigue crack growth behavior of alloy 718

10.3390/met12050710 · 2022 · External reference

Achieving high strength and ductility in inconel 718: tailoring grain structure through micron-sized carbide additives in PBF-LB/M additive manufacturing

10.1080/17452759.2024.2396064 · 2024 · External reference

In-situ SEM-EBSD investigation of the low-cycle fatigue deformation behavior of Inconel 718 at grain-scale

10.1016/j.jmrt.2023.04.143 · 2023 · External reference

The deformation and ageing of mild steel: III discussion of results

10.1088/0370-1301/64/9/303 · 1951 · External reference

Effect of initial powder particle size on the hot workability of powder metallurgy Ni-based superalloys

10.1016/j.matdes.2020.108926 · 2020 · External reference

Atomistic simulation Study of grain boundary segregation and grain boundary migration in Ni-Cr alloys

10.3390/met14040454 · 2024 · External reference

A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures—Ii. The effect of second-phase particles

10.1016/s1359-6454(97)00173-0 · 1997 · External reference

Unresolved reference

2012 · External reference

Unresolved reference

2021 · External reference

Fatigue crack propagation behavior of the grain size transition zone in a dual microstructure turbine disc

10.1016/j.ijfatigue.2023.107647 · 2023 · External reference

Factors affecting the cut width in the wire-cut electrical discharge machining of VV751P heat-resistant nickel alloy

10.3103/s1068798x24701387 · 2024 · External reference

Effect of stabilization annealing on fatigue crack propagation behavior of inconel 706 alloy at 25 and 650 °C

10.1016/j.jmrt.2024.05.030 · 2024 · External reference

Crystal plasticity-based finite element simulations of load reversals and hat-shaped draw-bending for predicting the springback behavior of dual-phase steel sheets

10.1016/j.ijsolstr.2024.112924 · 2024 · External reference

Description of the behavior of an inconel 718 alloy disk using a multi-level physically oriented constitutive model

10.54708/19926502_2025_2921083 · 2025 · External reference

Grain size sensitive modelling of the nonlinear behaviour and fatigue damage of inconel 718 superalloy

10.1016/j.ijfatigue.2024.108422 · 2024 · External reference

Using the smith-watson-topper parameter and its modifications to calculate the fatigue life of metals: the state-of-the-art

10.3390/ma15103481 · 2022 · External reference

Comparative analysis of machine learning methods for solving the problem of predicting failures in gas turbine engines

10.46793/aeletters.2025.10.3.5 · 2025 · External reference

Full-field vs. homogenization methods to predict microstructure–property relations for polycrystalline materials

10.1007/978-1-4419-0643-4_11 · 2011 · External reference

A review of damage, void evolution, and fatigue life prediction models

10.3390/met11040609 · 2021 · External reference

High temperature corrosion-fatigue behavior of a shot peened nickel based superalloy

10.1016/j.corsci.2022.110577 · 2022 · External reference

Study on high-temperature low-cycle fatigue behavior of the FGH96 superalloy based on internal stress division

10.3390/met13101705 · 2023 · External reference

The integration of ANN and FEA and its application to property prediction of dual-performance turbine disks

10.3390/ma17133045 · 2024 · External reference

Effect of post-dynamic recrystallization on microstructure evolution of GH141 superalloy after gradient thermal deformation

10.1007/s12613-024-3074-6 · 2025 · External reference

Quality, microstructure, and properties of metal alloys

10.3390/ma16083019 · 2023 · External reference

Gradient microstructure evolution under thermo-mechanical coupling effects for a nickel-based powder metallurgy superalloy-dynamic recrystallization coexist with static recrystallization

10.1016/j.jmatprotec.2021.117142 · 2021 · External reference

An improved grain growth model and its application in gradient heat treatment of aero-engine turbine discs

10.3390/ma16196584 · 2023 · External reference

Study on the coupled creep‐fatigue damage characteristics of single crystal blade tenons under high‐speed rotation and high‐temperature environments

10.1111/ffe.70096 · 2025 · External reference

Influence of heat treatment on the high temperature properties of inconel 718 fabricated via laser beam powder bed fusion

10.1016/j.jmrt.2025.05.140 · 2025 · External reference

Cavity nucleation and growth in nickel-based alloys during creep

10.3390/ma15041495 · 2022 · External reference

Dual-phase polycrystalline crystal plasticity model revealing the relationship between microstructural characteristics and mechanical properties in additively manufactured maraging steel

10.1016/j.ijplas.2024.104058 · 2024 · External reference

Airworthiness qualification of a high-pressure turbine disk for a low bypass turbofan engine

10.1007/s11668-022-01582-8 · 2023 · External reference

An examination of the constitutive equation for elevated temperature plasticity

10.1016/s0921-5093(01)01115-7 · 2002 · External reference

Experimental correlations for high-temperature creep

1969 · External reference

Unresolved reference

External reference

Crack growth in laser powder bed fusion fabricated alloy 718 at 650 °C under static and cyclic loading

10.1016/j.ijfatigue.2025.108810 · 2025 · External reference

Unresolved reference

1961 · External reference

The cleavage strength of polycrystals

1953 · External reference

Analytical computation of stress intensity factor for multi-physics problems

10.1088/1757-899x/1306/1/012009 · 2024 · External reference

Influence of powder particle size on the microstructure of a hot isostatically pressed superalloy

10.1016/j.jmrt.2021.12.081 · 2022 · External reference

Modeling creep and long-term strength of thick-walled pipes under combined loading by axial force, torque, and internal pressure

10.18500/1816-9791-2018-18-4-484-495 · 2018 · External reference

Study of a granulated heat-resistant nickel alloy using atom probe tomography

10.31857/s001532302001012x · 2020 · External reference

Characterization of nanosized clusters and transition layers of contacting γ- and γ’-Phases in a Ni-Based superalloy

10.1134/s0031918x23600215 · 2023 · External reference

Macrophenomenological modeling to determinean efficient grain structure for the gas turbine engine disk

10.54708/19926502_2025_29110747 · 2025 · External reference

Predicting stress and creep life in inconel 718 blade-disk attachments

10.1016/j.engfailanal.2019.104226 · 2020 · External reference

10.1007/978-3-031-49507-6

10.1007/978-3-031-49507-6 · 2024 · External reference

A stress-strain function for the fatigue of metals

1970 · External reference

Investigation of the ni-co-cr alloy microstructure for the manufacturing of combustion chamber GTE by selective laser melting

10.1007/s00170-018-3166-4 · 2019 · External reference

Unresolved reference

External reference

Investigation of plastic deformation behavior of a grain-size gradient nickel-based superalloy

10.1016/j.jallcom.2024.175587 · 2024 · External reference

Unresolved reference

2011 · External reference

Effects of the stored energy inside the deformation zones of metal workpieces on the machining and service processes of machined parts: a review

10.1007/s00170-025-16279-z · 2025 · External reference

Microstructure-property relationships in directly aged alloy 718 turbine disks

10.1016/j.msea.2020.138967 · 2020 · External reference

High temperature deformation of inconel 718

10.1016/j.jmatprotec.2006.04.072 · 2006 · External reference

Multilevel models in physical mesomechanics of metals and alloys: results and prospects

10.1134/s1029959921040056 · 2021 · External reference

Nickel-based superalloys heat resistance BRANN simulation and analytical approximation

2019 · External reference

Computational study of the feasibility of implementing turbine disks with functionally graded characteristics to reduce their mass and increase strength

2018 · External reference

The development of columnar grain and single crystal high temperature materials through directional solidification

10.1016/0025-5416(70)90050-9 · 1970 · External reference

Mechanisms of abnormal grain growth in a powder metallurgy nickel-based superalloy

10.1016/j.jallcom.2025.182757 · 2025 · External reference

Deformation and evolution of life in crystalline materials: an integrated creep-fatigue theory

10.1201/b22348 · 2019 · External reference

A true-stress creep model based on deformation mechanisms for polycrystalline materials

10.1007/s11665-012-0191-6 · 2012 · External reference

Fatigue crack propagation analysis in an aero-engine turbine disc using computational methods and spin test

10.1016/j.tafmec.2022.103745 · 2023 · External reference

Prediction of cyclic damage in metallic alloys with crystal plasticity modeling enhanced by machine learning

10.1016/j.mtla.2022.101388 · 2022 · External reference

Investigation of the precipitation behavior and its role on creep deformation and failure mechanisms at high temperatures for a turbine disk alloy

10.1016/j.matchar.2024.113833 · 2024 · External reference

An increase in the performance of parts made of heat-resistant steels and alloys

10.1007/978-3-031-32774-2_28 · 2023 · External reference

Effect of hot forging on formation of a fine-grained structure and mechanical properties of a powder metallurgy nickel base superalloy

10.22226/2410-3535-2023-4-414-419 · 2023 · External reference

A unified microstructure-based constitutive model for a Ni-Based superalloy and its application in the forging processes of disk

10.3390/ma18112526 · 2025 · External reference

Modeling and simulation of dynamic recrystallization for inconel 718 in the presence of δ phase particles using a developed cellular automaton model

10.1088/1361-651x/aafc18 · 2019 · External reference

Thermal load sensitivity analysis and mass reduction design of heat pipe turbine disk

10.1007/978-981-97-3998-1_87 · 2024 · External reference