Research graph
References from 3D Printing of Continuous-Fiber-Reinforced Composites: Advances in Multifunctional Integration and Intelligent Manufacturing. Local targets link to admitted publications; unresolved targets remain external evidence.
10.1016/j.amf.2025.200198
10.1016/j.amf.2025.200198 · External reference
Additively Manufactured Fiber-Reinforced Composites: A Review of Mechanical Behavior and Opportunities
10.1016/j.jmst.2021.11.063 · 2022 · External reference
10.3390/app142210100
10.3390/app142210100 · External reference
Neural Co-Optimization of Structural Topology, Manufacturable Layers, and Path Orientations for Fiber-Reinforced Composites
10.1145/3730922 · 2025 · External reference
Design and Extrusion-Based 3D Printing of Continuous Fiber Composites: Status, Challenges, and Opportunities
10.1021/acs.langmuir.4c00139 · 2024 · External reference
Exceptional Mechanical Performance by Spatial Printing with Continuous Fiber: Curved Slicing
2024 · External reference
10.1145/3623263.3623356
10.1145/3623263.3623356 · External reference
10.3390/polym14040819
10.3390/polym14040819 · External reference
10.1016/j.matpr.2023.11.033
10.1016/j.matpr.2023.11.033 · External reference
A Review of 3D Printing Continuous Carbon Fiber Reinforced Thermoplastic Polymers: Materials, Processes, Performance Enhancement, and Failure Analysis
10.1002/pc.29895 · 2025 · External reference
A Constitutive Model for 3D Printed Continuous Fiber Reinforced Composite Structures with Variable Fiber Content
10.1016/j.compositesb.2020.107893 · 2020 · External reference
Towards Intelligent Cooperative Robotics in Additive Manufacturing: Past, Present, and Future
10.1016/j.rcim.2024.102925 · 2025 · External reference
10.3390/ma15238521
10.3390/ma15238521 · External reference
10.3390/polym15183740
10.3390/polym15183740 · External reference
Effect of the Fiber Orientation on the Tensile and Flexural Behavior of Continuous Carbon Fiber Composites Made via Fused Filament Fabrication
10.1007/s00170-021-06997-5 · 2021 · External reference
High-Performance Carbon Fiber Reinforced Polyether-Ether-Ketone Composite Pellets 3D-Printed via Screw-Extrusion Additive Manufacturing
10.1016/j.compscitech.2023.110362 · 2024 · External reference
10.3390/polym17121601
10.3390/polym17121601 · External reference
10.3390/polym12102188
10.3390/polym12102188 · External reference
3D-Printing of Continuous Fiber: A Review of Processes, Materials and Properties
2023 · External reference
Current Approaches to Digital Twins in Additive Manufacturing: A Systematic Literature Review
10.1007/s40964-025-01262-7 · 2025 · External reference
In-Nozzle Impregnation of Continuous Textile Flax Fiber/Polyamide 6 Composite during FFF Process
10.1016/j.compositesa.2021.106725 · 2022 · External reference
An Investigation into Printing Pressure of 3D Printed Continuous Carbon Fiber Reinforced Composites
10.1016/j.compositesa.2022.107162 · 2022 · External reference
Research on the Fabrication of Continuous Carbon Fiber Reinforced Polyamide 6 Composites by Means of Ultrasonic Vibration
10.1007/s00170-023-11958-1 · 2023 · External reference
Preparation of Continuous Carbon Fiber Reinforced PA6 Prepreg Filaments with High Fiber Volume Fraction
10.1016/j.addlet.2024.100245 · 2024 · External reference
Development of Continuous Fiber Reinforced Polymer Composites Using In-Situ Co-Extrusion Towpreg Material Extrusion Process with Optimized Cooling and Evaluation of Their Mechanical Performance and Quality
10.1016/j.jsamd.2025.100966 · 2025 · External reference
Characterization of Continuous Carbon Fibre Reinforced 3D Printed Polymer Composites with Varying Fibre Volume Fractions
10.1016/j.compstruct.2021.115033 · 2022 · External reference
Performance and Failure Modes of Continuous Fibre-Reinforced Energy Absorption Tubes by Cylindrical Layered 3D Printing
10.1080/17452759.2024.2367122 · 2024 · External reference
10.3390/pr12061062
10.3390/pr12061062 · External reference
Additive Manufacturing of Fiber-Reinforced Polymer Composites: A Technical Review and Status of Design Methodologies
10.1016/j.compositesb.2023.110603 · 2023 · External reference
Towards a Digital Twin Framework in Additive Manufacturing: Machine Learning and Bayesian Optimization for Time Series Process Optimization
10.1016/j.jmsy.2024.04.023 · 2024 · External reference
Integration of Machine Learning and Digital Twin in Additive Manufacturing of Polymeric-Based Materials and Products
10.1007/s40964-025-01257-4 · 2025 · External reference
Toward a Smart Wire Arc Additive Manufacturing System: A Review on Current Developments and a Framework of Digital Twin
10.1016/j.jmsy.2023.01.012 · 2023 · External reference
10.20944/preprints202506.2516.v1
10.20944/preprints202506.2516.v1 · External reference
Systematic Review of Digital Twin Technology and Applications
10.1186/s42492-023-00137-4 · 2023 · External reference
Topology Optimization of 3D-Printed Continuous Fiber-Reinforced Composites Considering Manufacturability
10.1016/j.compscitech.2022.109727 · 2022 · External reference
Multiscale Topology Optimization and 3D Printing of Continuous Carbon Fiber Reinforced Composites Lattice Structure
10.1016/j.compositesb.2025.112691 · 2025 · External reference
Anisotropic Topology Optimization and 3D Printing for Composite Structures with Tailored Continuous Carbon Fiber Paths
10.1016/j.compositesb.2025.112371 · 2025 · External reference
10.1016/j.cjmeam.2023.100090
10.1016/j.cjmeam.2023.100090 · External reference
Effect of Fiber Volume Fraction on the Impact Strength of Fiber Reinforced Polymer Composites Made by FDM Process
10.1016/j.matpr.2020.12.262 · 2021 · External reference
3D Compaction Printing of a Continuous Carbon Fiber Reinforced Thermoplastic
10.1016/j.compositesa.2020.105985 · 2020 · External reference
Effects of Hygrothermal Aging on the Tensile and Bonding Performance of Consolidated 3D Printed Polyamide-6 Composites Reinforced with Short and Multidirectional Continuous Carbon Fibers
10.1016/j.compositesa.2022.107334 · 2023 · External reference
Thermoforming of Partially Biodegradable Hybrid Thermoplastic Composites for Bone Plate Applications
10.1016/j.compositesb.2023.111123 · 2024 · External reference
3D-Printed High-Toughness Composite Structures by Anisotropic Topology Optimization
10.1016/j.compositesb.2023.110572 · 2023 · External reference
A Novel Free-Hanging 3D Printing Method for Continuous Carbon Fiber Reinforced Thermoplastic Lattice Truss Core Structures
10.1016/j.matdes.2017.10.007 · 2018 · External reference
Experimental Investigation of Additively Manufactured Continuous Fiber Reinforced Composite Parts with Optimized Topology and Fiber Paths
2021 · External reference
Recent Progress in Non-Planar 3D Printing of Continuous Fiber-Reinforced Composites
10.1016/j.compositesa.2025.108900 · 2025 · External reference
Additive Manufacturing of Continuous Fiber Reinforced Polymer Composites: Process Planning and Intelligent Control
10.1016/j.jmapro.2025.04.015 · 2025 · External reference
Novel Application of Dual-Nozzle 3D Printer for Enhanced in-Situ Impregnation 3D Printing of Dry Continuous Fiber Reinforced Composites
10.1016/j.compositesa.2024.108231 · 2024 · External reference
10.3390/polym16060831
10.3390/polym16060831 · External reference
10.3390/polym16121622
10.3390/polym16121622 · External reference
Topology and Fiber Path Optimization of Composite Structures: A Critical Review
10.1016/j.matdes.2025.113699 · 2025 · External reference
A Review on Additive Manufacturing of Carbon Fiber-reinforced Polymers: Current Methods, Materials, Mechanical Properties, Applications and Challenges
10.1002/app.53476 · 2023 · External reference
Material Extrusion Additive Manufacturing of Continuous Fibre Reinforced Polymer Matrix Composites: A Review and Outlook
10.1016/j.compositesb.2021.109143 · 2021 · External reference
Photo Curable Resin for 3D Printed Conductive Structures
2022 · External reference
10.3390/polym15163412
10.3390/polym15163412 · External reference
High-Temperature Fracture Behavior of Carbon Fiber Reinforced PEEK Composites Fabricated via Fused Filament Fabrication
10.1016/j.compositesb.2023.110987 · 2023 · External reference
A Review on PEEK Composites—Manufacturing Methods, Properties and Applications
10.1016/j.matpr.2020.07.124 · 2020 · External reference
10.3390/ma16237311
10.3390/ma16237311 · External reference
Fabrication of a Continuous Carbon Fiber-Reinforced Phenolic Resin Composites via in Situ-Curing 3D Printing Technology
10.1016/j.coco.2023.101497 · 2023 · External reference
The Mechanical Performance of the 3D Printed Composites Produced with Continuous Carbon Fiber Reinforced Filaments Obtained via Melt Impregnation
2021 · External reference
10.3390/jcs5120325
10.3390/jcs5120325 · External reference
Experimental and Numerical Investigation on Pyrolysis and Combustion Behavior of Biomass Bast Fibers: Hemp, Flax and Ramie Fibers
10.1016/j.jaap.2024.106875 · 2025 · External reference
10.1016/j.cjmeam.2023.100092
10.1016/j.cjmeam.2023.100092 · External reference
10.1109/dtpi61353.2024.10778908
10.1109/dtpi61353.2024.10778908 · External reference
Investigating Gradient Temperature Control for Enhanced Interfacial Bonding Behavior in Material Extrusion 3D Printing Continuous Fiber Reinforced Polymer Composites
10.1016/j.euromechsol.2024.105349 · 2024 · External reference
3D Printing of Extremely Viscous Materials Using Ultrasonic Vibrations
2018 · External reference
Tailoring Interfacial Architectures in Aramid Fiber Composites: Integrated Gains in Mechanical Strength, Dielectric Performance, and Thermal Stability
10.1016/j.apsusc.2025.163575 · 2025 · External reference
Mechanical Properties of Ramie/Flax Hybrid Natural Fiber Composites under Different Conditions
10.1007/s13399-023-04628-5 · 2024 · External reference
Comparative Performance of Flax Fibers and Ramie Fibers Reinforced Functionalized Polypropylene Composites
2025 · External reference
Novel In-Line Plasma Compounding of Flax Fibre-Reinforced Pa6 Composites
10.1016/j.compositesb.2025.112753 · 2025 · External reference
10.3390/jcs9050218
10.3390/jcs9050218 · External reference
Effect of Moisture Content on the Mechanical Performance of 3D Printed Continuous Reinforced Two-Matrix Composite
10.1007/s00170-024-14041-5 · 2024 · External reference
Additive Manufacturing of Continuous Carbon Fiber/Epoxy Composites with Structured Core-Shell Towpreg: Methods, Characterization, and Mechanics
10.1016/j.compositesb.2024.112001 · 2025 · External reference
Separated 3D Printing of Continuous Carbon Fiber Reinforced Thermoplastic Polyimide
10.1016/j.compositesa.2019.04.002 · 2019 · External reference
Preparation of Pre-Impregnated Continuous Carbon Fiber Reinforced Nylon6 Filaments and the Mechanical Properties of 3D Printed Composites
10.1016/j.mtcomm.2023.106163 · 2023 · External reference
Amelioration of Interfacial Properties for CGF/PA6 Composites Fabricated by Ultrasound-Assisted FDM 3D Printing
10.1016/j.coco.2023.101551 · 2023 · External reference
10.3390/jmmp8030095
10.3390/jmmp8030095 · External reference
Artificial Intelligence-Augmented Additive Manufacturing Insights on Closed-Loop 3D Printing
10.1002/aisy.202400102 · 2024 · External reference
Three-Dimensional Printing of High-Performance Continuous Fiber-Reinforced Thermoplastic Composites: Causes and Elimination of Process-Induced Defects
10.1016/j.compositesb.2024.112080 · 2025 · External reference
10.3390/polym14091838
10.3390/polym14091838 · External reference
Development of a Continuous Fiber-Reinforced 3D Printing Process with a 6-Axis Robot Arm: Process Design and Equipment
10.1007/s00170-025-17263-3 · 2026 · External reference
Three-Dimensional Printing of Continuous-Fiber Composites by in-Nozzle Impregnation
10.1038/srep23058 · 2016 · External reference
Process-Dependent Multiscale Modeling for 3D Printing of Continuous Fiber-Reinforced Composites
2023 · External reference
Multi-Axis Additive Manufacturing Process for Continuous Fibre Reinforced Composite Parts
10.1016/j.procir.2019.09.022 · 2019 · External reference
3D Printing with Tension and Compaction: Prevention of Fiber Waviness in 3D-Printed Continuous Carbon Fiber–Reinforced Thermoplastics
10.1080/09243046.2023.2260233 · 2024 · External reference
Hybrid-Dispersion Impregnation for 3D-Printed Continuous Fibre Composites: The Processing and Mechanical Properties
10.1007/s40964-026-01616-9 · 2026 · External reference
An In-Situ Impregnation Model for Additive Manufacturing via Co-Extrusion of Continuous Fiber Bundles: A Rigorous Methodology for Determining Optimal Manufacturing Parameters
10.1016/j.compositesa.2025.109259 · 2025 · External reference
Multi-Axis Material Extrusion of Continuous Carbon Fiber Composites: Tool Design and Mechanical Characterization
10.1007/s00170-025-15749-8 · 2025 · External reference
10.3390/ma13020471
10.3390/ma13020471 · External reference
Investigating Twist Level Control for Modulating the Impregnation Process in High-Quality 3D Printed Continuous Flax Fiber/PLA Composites
10.1016/j.coco.2026.102726 · 2026 · External reference
Additive Manufacturing of PEEK-Based Continuous Fiber Reinforced Thermoplastic Composites with High Mechanical Properties
10.1016/j.compositesa.2023.107434 · 2023 · External reference
3D Microwave Printing Temperature Control of Continuous Carbon Fiber Reinforced Composites
10.1016/j.compscitech.2019.107939 · 2020 · External reference
10.1016/j.cjmeam.2022.100016
10.1016/j.cjmeam.2022.100016 · External reference
Improved Print Quality in Fused Filament Fabrication through Localized Dispensing of Hot Air around the Deposited Filament
2021 · External reference
Impregnation and Interlayer Bonding Behaviours of 3D-Printed Continuous Carbon-Fiber-Reinforced Poly-Ether-Ether-Ketone Composites
10.1016/j.compositesa.2019.03.020 · 2019 · External reference
Ultrasound-Assisted 3D Printing of Continuous Fiber-Reinforced Thermoplastic (FRTP) Composites
2019 · External reference
Influence of Post-Consolidation on Continuous Carbon-Fibre Reinforced Additively Manufactured Specimens in Bending
10.1016/j.compstruct.2023.117176 · 2023 · External reference
10.3390/jcs6050128
10.3390/jcs6050128 · External reference
10.3390/polym14030426
10.3390/polym14030426 · External reference
10.3390/polym14214659
10.3390/polym14214659 · External reference
Effects of Porosity on the Mechanical Properties of Additively Manufactured Components: A Critical Review
10.1088/2053-1591/abcc5d · 2020 · External reference
Mechanical Properties and Fracture Behavior of 3D Printed Continuous Glass Fiber Reinforced PEEK Composite
10.32604/jpm.2025.063324 · 2025 · External reference
Dual-Matrix Interface Strength of 3D Printed Continuous Carbon Fiber Reinforced Composites: Quantitative Assessment Methodology and Critical Influencing Factors
10.1016/j.addlet.2025.100303 · 2025 · External reference
10.3390/polym15173653
10.3390/polym15173653 · External reference
Predictive Modeling and Deviation Suppression in Fiber Bundle Deposition Trajectories for Co-Extrusion Additive Manufacturing of CFRTPCs
2026 · External reference
A Computer Graphics-Based Method for Efficient Generation of 3D Micromodels of CFRPs and Investigation of the Effect of Random Fiber Misalignment Phase on Fiber-Direction Compressive Strength
10.1016/j.compscitech.2026.111545 · 2026 · External reference
Enhancing Mechanical Properties of CCF/PEEK Composites by Rotary 3D Printing with Co-Regulation of Hot Compaction and Fiber Tension
10.1016/j.compscitech.2026.111603 · 2026 · External reference
Progressive Damage Analysis around In-Plane Fiber Waviness in CFRTP Laminates under Tensile and Compressive Loading
10.1016/j.compstruct.2025.119728 · 2025 · External reference
10.3390/fib13110145
10.3390/fib13110145 · External reference
Predicting Longitudinal Strength of Unidirectional Composites Using a Discrete Damage Model and Full-Field FFT-Based Simulations
10.1016/j.compstruct.2026.120281 · 2026 · External reference
Non-Local Orthotropic Damage-Plastic Model for 3D Printed Materials
10.1016/j.ijsolstr.2024.113210 · 2025 · External reference
Suppressing Torsional Deformation in MEX 3D-Printed Metal and Ceramic Components via Printing Process Optimization
10.1016/j.matdes.2026.115616 · 2026 · External reference
Optimization of 3D Printing Parameters to Minimize Residual Stresses in Maraging Steel
10.1016/j.prostr.2026.01.067 · 2026 · External reference
Path-Dependent Progressive Failure Analysis for 3D-Printed Continuous Carbon Fibre Reinforced Composites
10.1186/s10033-024-01054-0 · 2024 · External reference
Mechanical and Interfacial Analysis of 3D-Printed Two-Matrix Continuous Carbon Fibre Composites for Enhanced Structural Performance
10.1016/j.compositesa.2024.108105 · 2024 · External reference
10.3390/polym16212996
10.3390/polym16212996 · External reference
Additive Manufacturing of Continuous Fiber Reinforced Polymer Composites: Design Opportunities and Novel Applications
10.1016/j.coco.2021.100907 · 2021 · External reference
A Rigid-Flexible Gradient Interphase for High-Performance CF/PEEK Composites via Synergistic Effects of Non-Destructive Grafting and Sizing
10.1016/j.compositesb.2026.114091 · 2026 · External reference
Multiscale Analysis and Structural Effects of Interfacial Damage in 3D Angle-Interlocked Woven Composites under Shear Loading
10.1016/j.compositesb.2026.113911 · 2026 · External reference
3D Printed Continuous CF/PA6 Composites: Effect of Microscopic Voids on Mechanical Performance
10.1016/j.compscitech.2020.108077 · 2020 · External reference
Hygromechanical Properties of 3D Printed Continuous Carbon and Glass Fibre Reinforced Polyamide Composite for Outdoor Structural Applications
2019 · External reference
A Review of Structural Topology Optimization for Fiber-Reinforced Composites
10.1016/j.compositesb.2025.112393 · 2025 · External reference
A Comprehensive Review of Fiber-Reinforced Topology Optimization for Advanced Polymer Composites Produced by Automated Manufacturing
2025 · External reference
10.3390/app122111211
10.3390/app122111211 · External reference
Field-Based Toolpath Generation for 3D Printing Continuous Fibre Reinforced Thermoplastic Composites
2022 · External reference
Concurrent Optimization of Continuous Carbon Fiber-Reinforced Composites with Multi-Scale Components Considering the Manufacturing Constraint
10.1016/j.compscitech.2024.110942 · 2025 · External reference
Topology Optimization of 3D Continuous Fiber-Reinforced Composites Using Cartesian Parametrization of Fiber Orientations
10.1007/s00158-024-03863-2 · 2024 · External reference
FRC-TOuNN: Topology Optimization of Continuous Fiber Reinforced Composites Using Neural Network
10.1016/j.cad.2022.103449 · 2023 · External reference
Concurrent Level Set Topology and Fiber Orientation Optimization of Fiber-Reinforced Composite Structures
10.1007/s00158-024-03819-6 · 2024 · External reference
Manufacturability-Aware Topology and Toolpath Co-Design for Continuous Fiber-Reinforced Composites
2025 · External reference
Multi-Layer Continuous Carbon Fiber Pattern Optimization and a Spline Based Path Planning Interpretation
10.1016/j.jmapro.2025.01.038 · 2025 · External reference
Continuous Fiber Paths Optimization for Composite Structures with Stress and Manufacturing Constraints Using a Parametric Level Set Method
10.1007/s10409-025-24849-x · 2026 · External reference
Concurrent Optimization of Structural Topology and Toolpath for Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites
10.1016/j.cma.2024.117227 · 2024 · External reference
Continuous Fiber-Reinforced 2.5D Hybrid Lattice Structures with Superior Compression Performance via Self-Supporting Suspension Printing
10.1016/j.compscitech.2024.110845 · 2024 · External reference
Topology Optimization and Continuous Path Strategy for 3D Printed Continuous Fiber Composite Structures
10.1002/pc.30013 · 2025 · External reference
DGTO: Derivable Geodesics-Coupled Topology Optimization for Multi-Axis 3D Printing of Continuous Fiber-Reinforced Spatial Structures
10.1016/j.cma.2025.118419 · 2026 · External reference
A Phase-Field-Based Graded-Material Topology Optimization with Stress Constraint
10.1142/s0218202520500281 · 2020 · External reference
Global Continuous Toolpath Planning with Controllable Local Directions
10.1016/j.cad.2023.103593 · 2023 · External reference
Multi-Phase-Field Framework for Multi-Material Topology Optimization
10.1016/j.commatsci.2024.113201 · 2024 · External reference
Design Optimization of Continuous Fiber Composites with Thermo-Mechanical Coupling and Load Uncertainties
10.1016/j.coco.2024.102143 · 2024 · External reference
Hybrid Effect of 3D-Printed Coaxial Continuous Hybrid Fibre-Reinforced Composites
10.1016/j.tws.2023.110820 · 2023 · External reference
Hybrid Layout and Additive Manufacturing of Continuous Carbon/Glass Fibers Reinforced Composites, and Its Effect on Mechanical Properties
10.1016/j.compstruct.2023.117133 · 2023 · External reference
Hybrid Effects and Interactive Failure Mechanisms of Hybrid Fiber Composites under Flexural Loading: Carbon/Kevlar, Carbon/Glass, Carbon/Glass/Kevlar
10.1016/j.ast.2023.108105 · 2023 · External reference
10.3390/polym13091450
10.3390/polym13091450 · External reference
Topology Optimization of 3d-Printed Continuous Fiber-Reinforced Composites Considering Buckling Constraint
10.1016/j.engstruct.2026.122309 · 2026 · External reference
Multi-Material 3D Printing of Continuous Carbon Fibre Reinforced Thermoset Composites with Tailored Fibre Paths and Bespoke Conforming Thermoplastic Moulds
10.1016/j.compositesb.2025.112373 · 2025 · External reference
10.2514/6.2024-2288
10.2514/6.2024-2288 · External reference
Concurrent Topology and Fiber Angle Optimization for Direct Mechanical Analysis of Variable-Stiffness Fiber-Reinforced Composites
10.1016/j.compstruct.2026.120471 · 2026 · External reference
Preparation and 3D Printing of High-Thermal-Conductivity Continuous Mesophase-Pitch-Based Carbon Fiber/Epoxy Composites
10.1631/jzus.a2200413 · 2023 · External reference
Concurrent Multi-Material and Multi-Scale Design Optimization of Fiber-Reinforced Composite Material and Structures for Minimum Structural Compliance
10.1016/j.compstruct.2023.116796 · 2023 · External reference
Carbon Coated Piezoresistive Fiber Sensors: From Process Monitoring to Structural Health Monitoring of Composites—A Review
10.1016/j.compositesa.2020.106236 · 2021 · External reference
Unresolved reference
External reference
Topology Optimization for Additive Manufacturing of CFRP Structures
10.1016/j.ijmecsci.2024.108967 · 2024 · External reference
Topology Optimization of Continuous Fiber-Reinforced Composite (CFRC) Structures Considering the Residual Stress in Additive Manufacturing
10.1080/15376494.2023.2241043 · 2024 · External reference
Continuous Tow Shearing for the Automated Manufacture of Defect-Free Complex 3D Geometry Composite Parts
10.1016/j.compositesa.2024.108212 · 2024 · External reference
Performance-Driven 3D Printing of Continuous Curved Carbon Fibre Reinforced Polymer Composites: A Preliminary Numerical Study
10.1016/j.compositesb.2018.06.017 · 2018 · External reference
Toolpath Generation for High Density Spatial Fiber Printing Guided by Principal Stresses
10.1016/j.compositesb.2025.112154 · 2025 · External reference
Unlocking the Future of Precision Manufacturing: A Comprehensive Exploration of 3D Printing with Fiber-Reinforced Composites in Aerospace, Automotive, Medical, and Consumer Industries
10.1016/j.heliyon.2024.e27328 · 2024 · External reference
3D Printing of Self-Healing Materials
10.1002/adma.202305537 · 2024 · External reference
A 3D Printed Continuous Carbon Fiber Reinforced Composite with Function of Self-Detecting and Self-Healing of Internal Damages
10.1016/j.compscitech.2023.110264 · 2023 · External reference
10.3390/ma18092113
10.3390/ma18092113 · External reference
Recent Advances in Design Optimization and Additive Manufacturing of Composites: From Enhanced Mechanical Properties to Innovative Functionalities
10.1038/s44334-025-00040-1 · 2025 · External reference
10.20944/preprints202407.0887.v1
10.20944/preprints202407.0887.v1 · External reference
Advances in 3D Printing for Polymer Composites: A Review
10.1002/inf2.12568 · 2024 · External reference
Novel Microvascular Channel Method for Developing Self-Healing Functions of Composite Structures
10.1016/j.compositesa.2025.109226 · 2025 · External reference
10.3390/jmmp9060179
10.3390/jmmp9060179 · External reference
A Comprehensive Review on Fiber-Based Self-Sensing Polymer Composites for in Situ Structural Health Monitoring
10.1007/s42114-025-01413-y · 2025 · External reference
Fused Deposition Modeling 3D Printing of Continuous Natural and Regeneration Fibers Reinforced Polymer Composites and Its Mechanical Properties under Extreme Environmental Conditions—A Critical Review
10.15376/biores.20.2.zhang · 2025 · External reference
Intrinsic and Extrinsic Self-healing Fiber-reinforced Polymer Composites: A Review
10.1002/pc.27623 · 2023 · External reference
Self-Sensing and Self-Repairing of Delamination Damages of 3D Printed Hybrid Fiber Reinforced Composites
10.1016/j.jmapro.2025.05.042 · 2025 · External reference
Real-Time in-Service Structural Health Monitoring Method Based on Self-Sensing of CF/PEEK Prepreg in Automated Fiber Placement (AFP) Manufactured Parts
10.1016/j.compositesa.2025.108925 · 2025 · External reference
Integrated Self-Monitoring and Self-Healing Continuous Carbon Fiber Reinforced Thermoplastic Structures Using Dual-Material Three-Dimensional Printing Technology
10.1016/j.compscitech.2019.107986 · 2020 · External reference
Low-Velocity Impact Response and Compression Behaviour after the Impact of 3D-Printed CCFR Self-Sensing Honeycomb Structures
10.1016/j.compositesb.2023.110992 · 2023 · External reference
10.1016/j.amf.2025.200196
10.1016/j.amf.2025.200196 · External reference
Multiscale Computational Modeling of 3D Printed Continuous Fiber Reinforced Polymer Composites
10.1038/s41598-025-01556-4 · 2025 · External reference
Advances in 3D Printed Electromechanical Sensors: Performance Comparison, Trends, and Future Directions
2025 · External reference
Sensors Integration for Structural Health Monitoring in Composite Pressure Vessels: A Review
10.1016/j.compstruct.2024.118546 · 2025 · External reference
Integration of Composite-Structure Forming and Optical Fiber Sensing Using Tool-Change 3D Printing
10.1016/j.jcomc.2025.100611 · 2025 · External reference
Next-Generation Embedded Printed Sensors for Near-Field Monitoring of High-Performance Composites
10.1002/adem.202401332 · 2025 · External reference
Epoxy Composite with High Thermal Conductivity by Constructing 3D-Oriented Carbon Fiber and BN Network Structure
10.1039/d1ra04602k · 2021 · External reference
Experimental Characterization of 3D Printed PP/h-BN Thermally Conductive Composites with Highly Oriented h-BN and the Effects of Filler Size
10.1016/j.compositesa.2021.106586 · 2021 · External reference
4D Printing of Continuous Carbon Fiber Reinforced Composites with Magneto-/Electro-Induced Shape Memory Effect
10.1016/j.cej.2025.160450 · 2025 · External reference
A Review of 4D Printed Continuous Fiber-reinforced Polymer Composites: Materials, Structures, and Applications
10.1002/pc.29751 · 2025 · External reference
10.20944/preprints202310.0758.v1
10.20944/preprints202310.0758.v1 · External reference
Enhancing the Electrical Conductivity of 3D Printed Continuous Carbon Fibre Reinforced Composites via Surface Coating of MWCNT on Filaments
10.1016/j.coco.2025.102486 · 2025 · External reference
4D Printing of Liquid Crystal Elastomer Composites with Continuous Fiber Reinforcement
10.1038/s41467-024-52716-5 · 2024 · External reference
3D Printing of CNTs-Modified Continuous Carbon Fiber Composites Driven by Joule-Heat Resin Curing
10.1016/j.ijthermalsci.2025.110048 · 2025 · External reference
Evaluation of Electromagnetic Shielding Properties of High-Performance Continuous Carbon Fiber Composites Fabricated by Robotic 3D Printing
2022 · External reference
4D Printed Bio-Inspired Mesh Composite Materials with High Stretchability and Reconfigurability
10.1016/j.compscitech.2024.110503 · 2024 · External reference
Recent Advances in 4D Printing of Fiber-Reinforced Polymer Composites: A Review and Outlook
10.1016/j.compositesb.2024.111645 · 2024 · External reference
Dimensional Synergy in 3D Thermally Conductive Boron Nitride/Polymer Composites
10.1063/5.0243023 · 2025 · External reference
3D Printed Boron Nitride-Filled Continuous Carbon Fiber/Epoxy Resin Composites With Ultra-High Thermal Conductivity and Favorable Mechanical Property
10.1002/pc.70182 · 2025 · External reference
Effective Thermal Conductivity of 3D-Printed Continuous Fiber Polymer Composites
2020 · External reference
10.3390/polym15183743
10.3390/polym15183743 · External reference
Tailoring Thermal Conductivity and Printability in Boron Nitride/Epoxy Nano- and Micro-Composites for Material Extrusion 3D Printing
10.1016/j.polymer.2024.127899 · 2025 · External reference
4D Printing and Programming of Continuous Fibre-Reinforced Shape Memory Polymer Composites
10.1016/j.eurpolymj.2024.112988 · 2024 · External reference
4D Printed Continuous Fiber Reinforced Shape Memory Polymer Composites with Enhanced Mechanical Properties and Shape Memory Effects
10.1016/j.compositesa.2024.108085 · 2024 · External reference
4D-Printed Shape Memory Polymer Composites: Innovations in Smart Structures, Processing Strategies, and Application Prospects
10.1021/acsapm.5c02816 · 2025 · External reference
Electrothermal Shape Memory Behavior and Recovery Force of Four-Dimensional Printed Continuous Carbon Fiber/Polylactic Acid Composite
10.1088/1361-665x/abd912 · 2021 · External reference
3D Printing of Continuous Carbon Fibre Reinforced High-Temperature Epoxy Composites
10.1016/j.coco.2025.102397 · 2025 · External reference
Electrothermally Controlled Origami Fabricated by 4D Printing of Continuous Fiber-Reinforced Composites
10.1038/s41467-024-46591-3 · 2024 · External reference
4D-Printed Fiber-Reinforced Liquid Crystal Elastomer Composites for Multifunctional Soft Robots with Self-Heating Actuation
10.1080/17452759.2025.2499927 · 2025 · External reference
10.3390/polym14183800
10.3390/polym14183800 · External reference
Shape Memory Polymer Composites: 4D Printing, Smart Structures, and Applications
10.34133/research.0234 · 2023 · External reference
Programmable Multistability for 3D Printed Reinforced Multifunctional Composites with Reversible Shape Change
10.1016/j.compscitech.2021.109097 · 2022 · External reference
Hybrid 3D Printing of Continuous Carbon Fiber Magneto-Electric Composites for Load Real-Time Sensing and Energy Absorption
10.1002/adfm.202425794 · 2025 · External reference
4D Printing of Continuous Fiber-Reinforced Electroactive Smart Composites by Coaxial Additive Manufacturing
10.1016/j.compstruct.2023.117034 · 2023 · External reference
Deep Learning-Assisted Real-Time Defect Detection and Closed-Loop Adjustment for Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites
10.1016/j.rcim.2022.102431 · 2023 · External reference
In-Process Monitoring of Part Geometry in Fused Filament Fabrication Using Computer Vision and Digital Twins
2021 · External reference
Enhancing Additive Manufacturing Precision: Intelligent Inspection and Optimization for Defect-Free Continuous Carbon Fiber-Reinforced Polymer
10.1016/j.jcomc.2024.100451 · 2024 · External reference
Sub-Surface Thermal Measurement in Additive Manufacturing via Machine Learning-Enabled High-Resolution Fiber Optic Sensing
10.1038/s41467-024-51235-7 · 2024 · External reference
Multisensor Fusion-Based Digital Twin in Additive Manufacturing for in-situ Quality Monitoring and Defect Correction
10.1017/pds.2023.276 · 2023 · External reference
Optimising 3D-Printed Carbon Fibre Composites Using Machine Learning: Balancing Strength and Efficiency
10.1016/j.matdes.2025.114325 · 2025 · External reference
10.3390/engproc2024076096
10.3390/engproc2024076096 · External reference
Self-Adaptive Multimodal Temporal Intelligence for Autonomous Defect-Free Material Deposition in Additive Manufacturing
10.1016/j.nxmate.2026.102326 · 2026 · External reference
Autonomous Intelligent Additive Manufacturing of Continuous Fiber-Reinforced Composites: Data-Enhanced Knowledgebase and Multi-Sensor Fusion
10.1080/17452759.2024.2412192 · 2024 · External reference
Big Data, Machine Learning, and Digital Twin Assisted Additive Manufacturing: A Review
10.1016/j.matdes.2024.113086 · 2024 · External reference
LLM-3D Print: Large Language Models To Monitor and Control 3D Printing
2025 · External reference
A Review of Multimodal Surrogate Machine Learning Models for Real-Time Control and Defect Mitigation in Automated Composite Manufacturing
10.1007/s42452-026-08323-8 · 2026 · External reference
A Novel Real-Time Quality Control System for 3D Printing: A Deep Learning Approach Using Data Efficient Image Transformers
10.1016/j.eswa.2025.126863 · 2025 · External reference
The Convergence of IoT and 3D Printing: A Review of Technologies Enabling Decentralized Manufacturing
2026 · External reference
Carbon Fibre Damage during 3D Printing of Polymer Matrix Laminates Using the FDM Process
10.1016/j.matdes.2021.109679 · 2021 · External reference
Strength and Its Variability in 3D Printing of Polymer Composites with Continuous Fibers
10.1016/j.matdes.2022.111505 · 2023 · External reference
Lab-scale Manufacturing of Thermoplastic Matrix-continuous Carbon Fiber Filaments for Additive Manufacturing: Melt Impregnation, Properties of the Filaments and Its Printed Composites
10.1002/pc.29241 · 2025 · External reference
Enhancing Energy Absorption of 3D-Printed Auxetic Structures with a Novel Strategy of Embedding Continuous Carbon Fibers
10.1016/j.compositesa.2025.109426 · 2026 · External reference
Effect of Fiber Content on Mechanical Properties of Carbon Fiber-Reinforced Polyether-Ether-Ketone Composites Prepared Using Screw Extrusion-Based Online Mixing 3D Printing
2024 · External reference
Investigations on Flexural Performance of 3D-Printed Continuous Carbon Fiber-Reinforced Composites under Sub-Ambient to Elevated Temperature
10.1007/s11665-025-11832-z · 2025 · External reference
Strengthening and Toughening Strategies of 3D Printed Continuous Fiber-Reinforced Composites with Bioinspired Layered Configuration
10.1016/j.compositesa.2025.108962 · 2025 · External reference
Interfacial Performance and Build Orientation of 3D -printed Poly(Ether-ketone-ketone) Reinforced by Continuous Carbon Fiber
10.1002/pc.28000 · 2024 · External reference
3D Printing of a Continuous Fiber-Reinforced Composite Based on a Coaxial Kevlar/PLA Filament
2021 · External reference
Shear Characterization of Additively Manufactured Short Carbon Fiber-Reinforced Polymer
10.1002/masy.202000247 · 2021 · External reference
Investigating the Hot Isostatic Pressing of an Additively Manufactured Continuous Carbon Fiber Reinforced PEEK Composite
2021 · External reference
Investigation on the Mechanical Properties of 3D Printed Hybrid Continuous Fiber-Filled Composite Considering Influence of Interfaces
10.1007/s00170-022-10398-7 · 2022 · External reference
Additive Manufacturing of Continuous Carbon Fiber Reinforced PETG with Ultra-High Interlaminar Shear Strength
10.1016/j.jmrt.2024.12.240 · 2025 · External reference
Layup Sequence and Interfacial Bonding of Additively Manufactured Polymeric Composite: A Brief Review
10.1515/ntrev-2021-0116 · 2021 · External reference
Application of Interlaminar Shear Strength and Finite Element Modeling for Failure Analysis of 3D Printed Continuous Fiber-Reinforced Composites
10.1007/s40964-023-00417-8 · 2023 · External reference
Additive Manufacturing of Continuous Carbon Fiber Reinforced Epoxy Composite with Graphene Enhanced Interlayer Bond toward ULTRA-HIGH Mechanical Properties
10.1002/pc.26423 · 2022 · External reference
Influence of Preheating Temperature and Printing Speed on Interlaminar Shear Performance of Laser-assisted Additive Manufacturing for CCF/PEEK Composites
10.1002/pc.26625 · 2022 · External reference
10.3390/polym13101653
10.3390/polym13101653 · External reference
Improving Interlaminar Shear Strength of Continuous Carbon Fiber Reinforced PEEK via Laser Directed Energy Deposition: Experimental Study and Physically Based Modelling
10.1016/j.compositesb.2025.112213 · 2025 · External reference
10.3390/polym15183839
10.3390/polym15183839 · External reference
Z-Direction Performance and Failure Behavior of 3D Printed Continuous Fiber Reinforced Composites with Sinusoidal Structure
10.1016/j.compscitech.2023.110069 · 2023 · External reference
3D Printing of Frontal-Polymerized Multiscale Epoxy Thermoset and Composites
2022 · External reference
Automated Interlaminar Reinforcement with Thickness Directional Fiber Arrangement for 3D Printing
10.1016/j.compstruct.2022.115321 · 2022 · External reference
10.3390/app13105914
10.3390/app13105914 · External reference
Unresolved reference
External reference
Enhancing Z -direction Strength of 3D -printed Polylactide by Embedding Continuous Carbon Fibers
10.1002/pc.29925 · 2025 · External reference
Experimental and Numerical Investigation of Tensile Performance in 3D -Printed Continuous Fiber-Reinforced Composites With Various Printing Paths and Materials Combinations
10.1002/pc.70678 · 2026 · External reference
Additive Manufacturing of High Density Carbon Fibre Reinforced Polymer Composites
2022 · External reference
10.3390/polym16010108
10.3390/polym16010108 · External reference
Optimization of 3D Printing Parameters for Enhanced Tensile Properties in Continuous Carbon Fiber Reinforced PLA Composites
10.1088/2053-1591/adc5cc · 2025 · External reference
Influence of Environmental Conditions on the Flexural Behavior of 3D Printed Short and Continuous Carbon Fiber-Reinforced Composites
10.1007/s10443-025-10430-5 · 2026 · External reference
Continuous Carbon Fibre Reinforced 3D-Printed Composites: Impact Damage and Compression after Impact (CAI) Performance
10.1016/j.compositesa.2025.109097 · 2025 · External reference
High-Performance Bending in 3D-Printed Reinforced-Rib Corrugated Composites via Continuous Fiber Additive Manufacturing: A Hybrid Experimental-Computational Approach
10.1016/j.tws.2025.113905 · 2025 · External reference
Fatigue Behavior and Failure Mechanism of 3D-Printed Continuous Glass Fiber-Reinforced PLA Composites under Rotating Bending Fatigue
10.1016/j.jcomc.2025.100623 · 2025 · External reference
Residual Stiffness and Strength Analysis of Fatigue Behavior in a 3D-Printed Honeycomb Structure of Continuous Glass Fiber-Reinforced Polylactic Acid (PLA) Composite
10.1016/j.jcomc.2024.100552 · 2025 · External reference
Accelerated Fatigue Characterization of Additively Manufactured Continuous Carbon Fiber Reinforced Thermoplastic: A Thermodynamic Approach
10.1016/j.compositesa.2025.108805 · 2025 · External reference
Evaluation of Fatigue Characteristics of 3D Printed/Composites Reinforced with Carbon Fiber Using Design of Experiments
10.1002/pc.28958 · 2024 · External reference
On the Optimization of Fatigue Limit in Additively Manufactured Fiber Reinforced Polymer Composites
10.1007/s40964-025-00961-5 · 2025 · External reference
On the Printability and Inter-Layer Adhesion in 3D Printing of Continuous Carbon Fibre Reinforced PEEK Composite Using Tape and Filament
10.1016/j.compositesa.2024.108654 · 2025 · External reference
Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites: Current Trend and Future Directions
10.1007/s40964-024-00777-9 · 2025 · External reference
Degradation Characteristics of 3D Printed Continuous Fibre-Reinforced PA6/Chopped Fibre Composites in Simulated Saltwater
10.1007/s40964-024-00654-5 · 2025 · External reference
Next-Generation Embedded Printed Sensors for Near-Field Monitoring of High-Performance Composites
10.1002/adem.202401332 · ExternalCitation · doi-reference
Hybrid 3D Printing of Continuous Carbon Fiber Magneto-Electric Composites for Load Real-Time Sensing and Energy Absorption
10.1002/adfm.202425794 · ExternalCitation · doi-reference
3D Printing of Self-Healing Materials
10.1002/adma.202305537 · ExternalCitation · doi-reference
Artificial Intelligence-Augmented Additive Manufacturing Insights on Closed-Loop 3D Printing
10.1002/aisy.202400102 · ExternalCitation · doi-reference
A Review on Additive Manufacturing of Carbon Fiber-reinforced Polymers: Current Methods, Materials, Mechanical Properties, Applications and Challenges
10.1002/app.53476 · ExternalCitation · doi-reference
Advances in 3D Printing for Polymer Composites: A Review
10.1002/inf2.12568 · ExternalCitation · doi-reference
Shear Characterization of Additively Manufactured Short Carbon Fiber-Reinforced Polymer
10.1002/masy.202000247 · ExternalCitation · doi-reference
Additive Manufacturing of Continuous Carbon Fiber Reinforced Epoxy Composite with Graphene Enhanced Interlayer Bond toward ULTRA-HIGH Mechanical Properties
10.1002/pc.26423 · ExternalCitation · doi-reference
Influence of Preheating Temperature and Printing Speed on Interlaminar Shear Performance of Laser-assisted Additive Manufacturing for CCF/PEEK Composites
10.1002/pc.26625 · ExternalCitation · doi-reference
Intrinsic and Extrinsic Self-healing Fiber-reinforced Polymer Composites: A Review
10.1002/pc.27623 · ExternalCitation · doi-reference
Interfacial Performance and Build Orientation of 3D -printed Poly(Ether-ketone-ketone) Reinforced by Continuous Carbon Fiber
10.1002/pc.28000 · ExternalCitation · doi-reference
Evaluation of Fatigue Characteristics of 3D Printed/Composites Reinforced with Carbon Fiber Using Design of Experiments
10.1002/pc.28958 · ExternalCitation · doi-reference
Lab-scale Manufacturing of Thermoplastic Matrix-continuous Carbon Fiber Filaments for Additive Manufacturing: Melt Impregnation, Properties of the Filaments and Its Printed Composites
10.1002/pc.29241 · ExternalCitation · doi-reference
A Review of 4D Printed Continuous Fiber-reinforced Polymer Composites: Materials, Structures, and Applications
10.1002/pc.29751 · ExternalCitation · doi-reference
A Review of 3D Printing Continuous Carbon Fiber Reinforced Thermoplastic Polymers: Materials, Processes, Performance Enhancement, and Failure Analysis
10.1002/pc.29895 · ExternalCitation · doi-reference
Enhancing Z -direction Strength of 3D -printed Polylactide by Embedding Continuous Carbon Fibers
10.1002/pc.29925 · ExternalCitation · doi-reference
Topology Optimization and Continuous Path Strategy for 3D Printed Continuous Fiber Composite Structures
10.1002/pc.30013 · ExternalCitation · doi-reference
3D Printed Boron Nitride-Filled Continuous Carbon Fiber/Epoxy Resin Composites With Ultra-High Thermal Conductivity and Favorable Mechanical Property
10.1002/pc.70182 · ExternalCitation · doi-reference
Experimental and Numerical Investigation of Tensile Performance in 3D -Printed Continuous Fiber-Reinforced Composites With Various Printing Paths and Materials Combinations
10.1002/pc.70678 · ExternalCitation · doi-reference
Concurrent Level Set Topology and Fiber Orientation Optimization of Fiber-Reinforced Composite Structures
10.1007/s00158-024-03819-6 · ExternalCitation · doi-reference
Topology Optimization of 3D Continuous Fiber-Reinforced Composites Using Cartesian Parametrization of Fiber Orientations
10.1007/s00158-024-03863-2 · ExternalCitation · doi-reference
Effect of the Fiber Orientation on the Tensile and Flexural Behavior of Continuous Carbon Fiber Composites Made via Fused Filament Fabrication
10.1007/s00170-021-06997-5 · ExternalCitation · doi-reference
Investigation on the Mechanical Properties of 3D Printed Hybrid Continuous Fiber-Filled Composite Considering Influence of Interfaces
10.1007/s00170-022-10398-7 · ExternalCitation · doi-reference
Research on the Fabrication of Continuous Carbon Fiber Reinforced Polyamide 6 Composites by Means of Ultrasonic Vibration
10.1007/s00170-023-11958-1 · ExternalCitation · doi-reference
Effect of Moisture Content on the Mechanical Performance of 3D Printed Continuous Reinforced Two-Matrix Composite
10.1007/s00170-024-14041-5 · ExternalCitation · doi-reference
Multi-Axis Material Extrusion of Continuous Carbon Fiber Composites: Tool Design and Mechanical Characterization
10.1007/s00170-025-15749-8 · ExternalCitation · doi-reference
Development of a Continuous Fiber-Reinforced 3D Printing Process with a 6-Axis Robot Arm: Process Design and Equipment
10.1007/s00170-025-17263-3 · ExternalCitation · doi-reference
Continuous Fiber Paths Optimization for Composite Structures with Stress and Manufacturing Constraints Using a Parametric Level Set Method
10.1007/s10409-025-24849-x · ExternalCitation · doi-reference
Influence of Environmental Conditions on the Flexural Behavior of 3D Printed Short and Continuous Carbon Fiber-Reinforced Composites
10.1007/s10443-025-10430-5 · ExternalCitation · doi-reference
Investigations on Flexural Performance of 3D-Printed Continuous Carbon Fiber-Reinforced Composites under Sub-Ambient to Elevated Temperature
10.1007/s11665-025-11832-z · ExternalCitation · doi-reference
Mechanical Properties of Ramie/Flax Hybrid Natural Fiber Composites under Different Conditions
10.1007/s13399-023-04628-5 · ExternalCitation · doi-reference
Application of Interlaminar Shear Strength and Finite Element Modeling for Failure Analysis of 3D Printed Continuous Fiber-Reinforced Composites
10.1007/s40964-023-00417-8 · ExternalCitation · doi-reference
Degradation Characteristics of 3D Printed Continuous Fibre-Reinforced PA6/Chopped Fibre Composites in Simulated Saltwater
10.1007/s40964-024-00654-5 · ExternalCitation · doi-reference
Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites: Current Trend and Future Directions
10.1007/s40964-024-00777-9 · ExternalCitation · doi-reference
On the Optimization of Fatigue Limit in Additively Manufactured Fiber Reinforced Polymer Composites
10.1007/s40964-025-00961-5 · ExternalCitation · doi-reference
Integration of Machine Learning and Digital Twin in Additive Manufacturing of Polymeric-Based Materials and Products
10.1007/s40964-025-01257-4 · ExternalCitation · doi-reference
Current Approaches to Digital Twins in Additive Manufacturing: A Systematic Literature Review
10.1007/s40964-025-01262-7 · ExternalCitation · doi-reference
Hybrid-Dispersion Impregnation for 3D-Printed Continuous Fibre Composites: The Processing and Mechanical Properties
10.1007/s40964-026-01616-9 · ExternalCitation · doi-reference
A Comprehensive Review on Fiber-Based Self-Sensing Polymer Composites for in Situ Structural Health Monitoring
10.1007/s42114-025-01413-y · ExternalCitation · doi-reference
A Review of Multimodal Surrogate Machine Learning Models for Real-Time Control and Defect Mitigation in Automated Composite Manufacturing
10.1007/s42452-026-08323-8 · ExternalCitation · doi-reference
Preparation of Continuous Carbon Fiber Reinforced PA6 Prepreg Filaments with High Fiber Volume Fraction
10.1016/j.addlet.2024.100245 · ExternalCitation · doi-reference
Dual-Matrix Interface Strength of 3D Printed Continuous Carbon Fiber Reinforced Composites: Quantitative Assessment Methodology and Critical Influencing Factors
10.1016/j.addlet.2025.100303 · ExternalCitation · doi-reference
10.1016/j.amf.2025.200196
10.1016/j.amf.2025.200196 · ExternalCitation · doi-reference
10.1016/j.amf.2025.200198
10.1016/j.amf.2025.200198 · ExternalCitation · doi-reference
Tailoring Interfacial Architectures in Aramid Fiber Composites: Integrated Gains in Mechanical Strength, Dielectric Performance, and Thermal Stability
10.1016/j.apsusc.2025.163575 · ExternalCitation · doi-reference
Hybrid Effects and Interactive Failure Mechanisms of Hybrid Fiber Composites under Flexural Loading: Carbon/Kevlar, Carbon/Glass, Carbon/Glass/Kevlar
10.1016/j.ast.2023.108105 · ExternalCitation · doi-reference
FRC-TOuNN: Topology Optimization of Continuous Fiber Reinforced Composites Using Neural Network
10.1016/j.cad.2022.103449 · ExternalCitation · doi-reference
Global Continuous Toolpath Planning with Controllable Local Directions
10.1016/j.cad.2023.103593 · ExternalCitation · doi-reference
4D Printing of Continuous Carbon Fiber Reinforced Composites with Magneto-/Electro-Induced Shape Memory Effect
10.1016/j.cej.2025.160450 · ExternalCitation · doi-reference
10.1016/j.cjmeam.2022.100016
10.1016/j.cjmeam.2022.100016 · ExternalCitation · doi-reference
10.1016/j.cjmeam.2023.100090
10.1016/j.cjmeam.2023.100090 · ExternalCitation · doi-reference
10.1016/j.cjmeam.2023.100092
10.1016/j.cjmeam.2023.100092 · ExternalCitation · doi-reference
Concurrent Optimization of Structural Topology and Toolpath for Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites
10.1016/j.cma.2024.117227 · ExternalCitation · doi-reference
DGTO: Derivable Geodesics-Coupled Topology Optimization for Multi-Axis 3D Printing of Continuous Fiber-Reinforced Spatial Structures
10.1016/j.cma.2025.118419 · ExternalCitation · doi-reference
Additive Manufacturing of Continuous Fiber Reinforced Polymer Composites: Design Opportunities and Novel Applications
10.1016/j.coco.2021.100907 · ExternalCitation · doi-reference
Fabrication of a Continuous Carbon Fiber-Reinforced Phenolic Resin Composites via in Situ-Curing 3D Printing Technology
10.1016/j.coco.2023.101497 · ExternalCitation · doi-reference
Amelioration of Interfacial Properties for CGF/PA6 Composites Fabricated by Ultrasound-Assisted FDM 3D Printing
10.1016/j.coco.2023.101551 · ExternalCitation · doi-reference
Design Optimization of Continuous Fiber Composites with Thermo-Mechanical Coupling and Load Uncertainties
10.1016/j.coco.2024.102143 · ExternalCitation · doi-reference
3D Printing of Continuous Carbon Fibre Reinforced High-Temperature Epoxy Composites
10.1016/j.coco.2025.102397 · ExternalCitation · doi-reference
Enhancing the Electrical Conductivity of 3D Printed Continuous Carbon Fibre Reinforced Composites via Surface Coating of MWCNT on Filaments
10.1016/j.coco.2025.102486 · ExternalCitation · doi-reference
Investigating Twist Level Control for Modulating the Impregnation Process in High-Quality 3D Printed Continuous Flax Fiber/PLA Composites
10.1016/j.coco.2026.102726 · ExternalCitation · doi-reference
Multi-Phase-Field Framework for Multi-Material Topology Optimization
10.1016/j.commatsci.2024.113201 · ExternalCitation · doi-reference
Impregnation and Interlayer Bonding Behaviours of 3D-Printed Continuous Carbon-Fiber-Reinforced Poly-Ether-Ether-Ketone Composites
10.1016/j.compositesa.2019.03.020 · ExternalCitation · doi-reference
Separated 3D Printing of Continuous Carbon Fiber Reinforced Thermoplastic Polyimide
10.1016/j.compositesa.2019.04.002 · ExternalCitation · doi-reference
3D Compaction Printing of a Continuous Carbon Fiber Reinforced Thermoplastic
10.1016/j.compositesa.2020.105985 · ExternalCitation · doi-reference
Carbon Coated Piezoresistive Fiber Sensors: From Process Monitoring to Structural Health Monitoring of Composites—A Review
10.1016/j.compositesa.2020.106236 · ExternalCitation · doi-reference
Experimental Characterization of 3D Printed PP/h-BN Thermally Conductive Composites with Highly Oriented h-BN and the Effects of Filler Size
10.1016/j.compositesa.2021.106586 · ExternalCitation · doi-reference
In-Nozzle Impregnation of Continuous Textile Flax Fiber/Polyamide 6 Composite during FFF Process
10.1016/j.compositesa.2021.106725 · ExternalCitation · doi-reference
An Investigation into Printing Pressure of 3D Printed Continuous Carbon Fiber Reinforced Composites
10.1016/j.compositesa.2022.107162 · ExternalCitation · doi-reference
Effects of Hygrothermal Aging on the Tensile and Bonding Performance of Consolidated 3D Printed Polyamide-6 Composites Reinforced with Short and Multidirectional Continuous Carbon Fibers
10.1016/j.compositesa.2022.107334 · ExternalCitation · doi-reference
Additive Manufacturing of PEEK-Based Continuous Fiber Reinforced Thermoplastic Composites with High Mechanical Properties
10.1016/j.compositesa.2023.107434 · ExternalCitation · doi-reference
4D Printed Continuous Fiber Reinforced Shape Memory Polymer Composites with Enhanced Mechanical Properties and Shape Memory Effects
10.1016/j.compositesa.2024.108085 · ExternalCitation · doi-reference
Mechanical and Interfacial Analysis of 3D-Printed Two-Matrix Continuous Carbon Fibre Composites for Enhanced Structural Performance
10.1016/j.compositesa.2024.108105 · ExternalCitation · doi-reference
Continuous Tow Shearing for the Automated Manufacture of Defect-Free Complex 3D Geometry Composite Parts
10.1016/j.compositesa.2024.108212 · ExternalCitation · doi-reference
Novel Application of Dual-Nozzle 3D Printer for Enhanced in-Situ Impregnation 3D Printing of Dry Continuous Fiber Reinforced Composites
10.1016/j.compositesa.2024.108231 · ExternalCitation · doi-reference
On the Printability and Inter-Layer Adhesion in 3D Printing of Continuous Carbon Fibre Reinforced PEEK Composite Using Tape and Filament
10.1016/j.compositesa.2024.108654 · ExternalCitation · doi-reference
Accelerated Fatigue Characterization of Additively Manufactured Continuous Carbon Fiber Reinforced Thermoplastic: A Thermodynamic Approach
10.1016/j.compositesa.2025.108805 · ExternalCitation · doi-reference
Recent Progress in Non-Planar 3D Printing of Continuous Fiber-Reinforced Composites
10.1016/j.compositesa.2025.108900 · ExternalCitation · doi-reference
Real-Time in-Service Structural Health Monitoring Method Based on Self-Sensing of CF/PEEK Prepreg in Automated Fiber Placement (AFP) Manufactured Parts
10.1016/j.compositesa.2025.108925 · ExternalCitation · doi-reference
Strengthening and Toughening Strategies of 3D Printed Continuous Fiber-Reinforced Composites with Bioinspired Layered Configuration
10.1016/j.compositesa.2025.108962 · ExternalCitation · doi-reference
Continuous Carbon Fibre Reinforced 3D-Printed Composites: Impact Damage and Compression after Impact (CAI) Performance
10.1016/j.compositesa.2025.109097 · ExternalCitation · doi-reference
Novel Microvascular Channel Method for Developing Self-Healing Functions of Composite Structures
10.1016/j.compositesa.2025.109226 · ExternalCitation · doi-reference
An In-Situ Impregnation Model for Additive Manufacturing via Co-Extrusion of Continuous Fiber Bundles: A Rigorous Methodology for Determining Optimal Manufacturing Parameters
10.1016/j.compositesa.2025.109259 · ExternalCitation · doi-reference
Enhancing Energy Absorption of 3D-Printed Auxetic Structures with a Novel Strategy of Embedding Continuous Carbon Fibers
10.1016/j.compositesa.2025.109426 · ExternalCitation · doi-reference
Performance-Driven 3D Printing of Continuous Curved Carbon Fibre Reinforced Polymer Composites: A Preliminary Numerical Study
10.1016/j.compositesb.2018.06.017 · ExternalCitation · doi-reference
A Constitutive Model for 3D Printed Continuous Fiber Reinforced Composite Structures with Variable Fiber Content
10.1016/j.compositesb.2020.107893 · ExternalCitation · doi-reference
Material Extrusion Additive Manufacturing of Continuous Fibre Reinforced Polymer Matrix Composites: A Review and Outlook
10.1016/j.compositesb.2021.109143 · ExternalCitation · doi-reference
3D-Printed High-Toughness Composite Structures by Anisotropic Topology Optimization
10.1016/j.compositesb.2023.110572 · ExternalCitation · doi-reference
Additive Manufacturing of Fiber-Reinforced Polymer Composites: A Technical Review and Status of Design Methodologies
10.1016/j.compositesb.2023.110603 · ExternalCitation · doi-reference
High-Temperature Fracture Behavior of Carbon Fiber Reinforced PEEK Composites Fabricated via Fused Filament Fabrication
10.1016/j.compositesb.2023.110987 · ExternalCitation · doi-reference
Low-Velocity Impact Response and Compression Behaviour after the Impact of 3D-Printed CCFR Self-Sensing Honeycomb Structures
10.1016/j.compositesb.2023.110992 · ExternalCitation · doi-reference
Thermoforming of Partially Biodegradable Hybrid Thermoplastic Composites for Bone Plate Applications
10.1016/j.compositesb.2023.111123 · ExternalCitation · doi-reference
Recent Advances in 4D Printing of Fiber-Reinforced Polymer Composites: A Review and Outlook
10.1016/j.compositesb.2024.111645 · ExternalCitation · doi-reference
Additive Manufacturing of Continuous Carbon Fiber/Epoxy Composites with Structured Core-Shell Towpreg: Methods, Characterization, and Mechanics
10.1016/j.compositesb.2024.112001 · ExternalCitation · doi-reference
Three-Dimensional Printing of High-Performance Continuous Fiber-Reinforced Thermoplastic Composites: Causes and Elimination of Process-Induced Defects
10.1016/j.compositesb.2024.112080 · ExternalCitation · doi-reference
Toolpath Generation for High Density Spatial Fiber Printing Guided by Principal Stresses
10.1016/j.compositesb.2025.112154 · ExternalCitation · doi-reference
Improving Interlaminar Shear Strength of Continuous Carbon Fiber Reinforced PEEK via Laser Directed Energy Deposition: Experimental Study and Physically Based Modelling
10.1016/j.compositesb.2025.112213 · ExternalCitation · doi-reference
Anisotropic Topology Optimization and 3D Printing for Composite Structures with Tailored Continuous Carbon Fiber Paths
10.1016/j.compositesb.2025.112371 · ExternalCitation · doi-reference
Multi-Material 3D Printing of Continuous Carbon Fibre Reinforced Thermoset Composites with Tailored Fibre Paths and Bespoke Conforming Thermoplastic Moulds
10.1016/j.compositesb.2025.112373 · ExternalCitation · doi-reference
A Review of Structural Topology Optimization for Fiber-Reinforced Composites
10.1016/j.compositesb.2025.112393 · ExternalCitation · doi-reference
Multiscale Topology Optimization and 3D Printing of Continuous Carbon Fiber Reinforced Composites Lattice Structure
10.1016/j.compositesb.2025.112691 · ExternalCitation · doi-reference
Novel In-Line Plasma Compounding of Flax Fibre-Reinforced Pa6 Composites
10.1016/j.compositesb.2025.112753 · ExternalCitation · doi-reference
Multiscale Analysis and Structural Effects of Interfacial Damage in 3D Angle-Interlocked Woven Composites under Shear Loading
10.1016/j.compositesb.2026.113911 · ExternalCitation · doi-reference
A Rigid-Flexible Gradient Interphase for High-Performance CF/PEEK Composites via Synergistic Effects of Non-Destructive Grafting and Sizing
10.1016/j.compositesb.2026.114091 · ExternalCitation · doi-reference
3D Microwave Printing Temperature Control of Continuous Carbon Fiber Reinforced Composites
10.1016/j.compscitech.2019.107939 · ExternalCitation · doi-reference
Integrated Self-Monitoring and Self-Healing Continuous Carbon Fiber Reinforced Thermoplastic Structures Using Dual-Material Three-Dimensional Printing Technology
10.1016/j.compscitech.2019.107986 · ExternalCitation · doi-reference
3D Printed Continuous CF/PA6 Composites: Effect of Microscopic Voids on Mechanical Performance
10.1016/j.compscitech.2020.108077 · ExternalCitation · doi-reference
Programmable Multistability for 3D Printed Reinforced Multifunctional Composites with Reversible Shape Change
10.1016/j.compscitech.2021.109097 · ExternalCitation · doi-reference
Topology Optimization of 3D-Printed Continuous Fiber-Reinforced Composites Considering Manufacturability
10.1016/j.compscitech.2022.109727 · ExternalCitation · doi-reference
Z-Direction Performance and Failure Behavior of 3D Printed Continuous Fiber Reinforced Composites with Sinusoidal Structure
10.1016/j.compscitech.2023.110069 · ExternalCitation · doi-reference
A 3D Printed Continuous Carbon Fiber Reinforced Composite with Function of Self-Detecting and Self-Healing of Internal Damages
10.1016/j.compscitech.2023.110264 · ExternalCitation · doi-reference
High-Performance Carbon Fiber Reinforced Polyether-Ether-Ketone Composite Pellets 3D-Printed via Screw-Extrusion Additive Manufacturing
10.1016/j.compscitech.2023.110362 · ExternalCitation · doi-reference
4D Printed Bio-Inspired Mesh Composite Materials with High Stretchability and Reconfigurability
10.1016/j.compscitech.2024.110503 · ExternalCitation · doi-reference
Continuous Fiber-Reinforced 2.5D Hybrid Lattice Structures with Superior Compression Performance via Self-Supporting Suspension Printing
10.1016/j.compscitech.2024.110845 · ExternalCitation · doi-reference
Concurrent Optimization of Continuous Carbon Fiber-Reinforced Composites with Multi-Scale Components Considering the Manufacturing Constraint
10.1016/j.compscitech.2024.110942 · ExternalCitation · doi-reference
A Computer Graphics-Based Method for Efficient Generation of 3D Micromodels of CFRPs and Investigation of the Effect of Random Fiber Misalignment Phase on Fiber-Direction Compressive Strength
10.1016/j.compscitech.2026.111545 · ExternalCitation · doi-reference
Enhancing Mechanical Properties of CCF/PEEK Composites by Rotary 3D Printing with Co-Regulation of Hot Compaction and Fiber Tension
10.1016/j.compscitech.2026.111603 · ExternalCitation · doi-reference
Characterization of Continuous Carbon Fibre Reinforced 3D Printed Polymer Composites with Varying Fibre Volume Fractions
10.1016/j.compstruct.2021.115033 · ExternalCitation · doi-reference
Automated Interlaminar Reinforcement with Thickness Directional Fiber Arrangement for 3D Printing
10.1016/j.compstruct.2022.115321 · ExternalCitation · doi-reference
Concurrent Multi-Material and Multi-Scale Design Optimization of Fiber-Reinforced Composite Material and Structures for Minimum Structural Compliance
10.1016/j.compstruct.2023.116796 · ExternalCitation · doi-reference
4D Printing of Continuous Fiber-Reinforced Electroactive Smart Composites by Coaxial Additive Manufacturing
10.1016/j.compstruct.2023.117034 · ExternalCitation · doi-reference
Hybrid Layout and Additive Manufacturing of Continuous Carbon/Glass Fibers Reinforced Composites, and Its Effect on Mechanical Properties
10.1016/j.compstruct.2023.117133 · ExternalCitation · doi-reference
Influence of Post-Consolidation on Continuous Carbon-Fibre Reinforced Additively Manufactured Specimens in Bending
10.1016/j.compstruct.2023.117176 · ExternalCitation · doi-reference
Sensors Integration for Structural Health Monitoring in Composite Pressure Vessels: A Review
10.1016/j.compstruct.2024.118546 · ExternalCitation · doi-reference
Progressive Damage Analysis around In-Plane Fiber Waviness in CFRTP Laminates under Tensile and Compressive Loading
10.1016/j.compstruct.2025.119728 · ExternalCitation · doi-reference
Predicting Longitudinal Strength of Unidirectional Composites Using a Discrete Damage Model and Full-Field FFT-Based Simulations
10.1016/j.compstruct.2026.120281 · ExternalCitation · doi-reference
Concurrent Topology and Fiber Angle Optimization for Direct Mechanical Analysis of Variable-Stiffness Fiber-Reinforced Composites
10.1016/j.compstruct.2026.120471 · ExternalCitation · doi-reference
Topology Optimization of 3d-Printed Continuous Fiber-Reinforced Composites Considering Buckling Constraint
10.1016/j.engstruct.2026.122309 · ExternalCitation · doi-reference
A Novel Real-Time Quality Control System for 3D Printing: A Deep Learning Approach Using Data Efficient Image Transformers
10.1016/j.eswa.2025.126863 · ExternalCitation · doi-reference
Investigating Gradient Temperature Control for Enhanced Interfacial Bonding Behavior in Material Extrusion 3D Printing Continuous Fiber Reinforced Polymer Composites
10.1016/j.euromechsol.2024.105349 · ExternalCitation · doi-reference
4D Printing and Programming of Continuous Fibre-Reinforced Shape Memory Polymer Composites
10.1016/j.eurpolymj.2024.112988 · ExternalCitation · doi-reference
Unlocking the Future of Precision Manufacturing: A Comprehensive Exploration of 3D Printing with Fiber-Reinforced Composites in Aerospace, Automotive, Medical, and Consumer Industries
10.1016/j.heliyon.2024.e27328 · ExternalCitation · doi-reference
Topology Optimization for Additive Manufacturing of CFRP Structures
10.1016/j.ijmecsci.2024.108967 · ExternalCitation · doi-reference
Non-Local Orthotropic Damage-Plastic Model for 3D Printed Materials
10.1016/j.ijsolstr.2024.113210 · ExternalCitation · doi-reference
3D Printing of CNTs-Modified Continuous Carbon Fiber Composites Driven by Joule-Heat Resin Curing
10.1016/j.ijthermalsci.2025.110048 · ExternalCitation · doi-reference
Experimental and Numerical Investigation on Pyrolysis and Combustion Behavior of Biomass Bast Fibers: Hemp, Flax and Ramie Fibers
10.1016/j.jaap.2024.106875 · ExternalCitation · doi-reference
Enhancing Additive Manufacturing Precision: Intelligent Inspection and Optimization for Defect-Free Continuous Carbon Fiber-Reinforced Polymer
10.1016/j.jcomc.2024.100451 · ExternalCitation · doi-reference
Residual Stiffness and Strength Analysis of Fatigue Behavior in a 3D-Printed Honeycomb Structure of Continuous Glass Fiber-Reinforced Polylactic Acid (PLA) Composite
10.1016/j.jcomc.2024.100552 · ExternalCitation · doi-reference
Integration of Composite-Structure Forming and Optical Fiber Sensing Using Tool-Change 3D Printing
10.1016/j.jcomc.2025.100611 · ExternalCitation · doi-reference
Fatigue Behavior and Failure Mechanism of 3D-Printed Continuous Glass Fiber-Reinforced PLA Composites under Rotating Bending Fatigue
10.1016/j.jcomc.2025.100623 · ExternalCitation · doi-reference
Multi-Layer Continuous Carbon Fiber Pattern Optimization and a Spline Based Path Planning Interpretation
10.1016/j.jmapro.2025.01.038 · ExternalCitation · doi-reference
Additive Manufacturing of Continuous Fiber Reinforced Polymer Composites: Process Planning and Intelligent Control
10.1016/j.jmapro.2025.04.015 · ExternalCitation · doi-reference
Self-Sensing and Self-Repairing of Delamination Damages of 3D Printed Hybrid Fiber Reinforced Composites
10.1016/j.jmapro.2025.05.042 · ExternalCitation · doi-reference
Additive Manufacturing of Continuous Carbon Fiber Reinforced PETG with Ultra-High Interlaminar Shear Strength
10.1016/j.jmrt.2024.12.240 · ExternalCitation · doi-reference
Additively Manufactured Fiber-Reinforced Composites: A Review of Mechanical Behavior and Opportunities
10.1016/j.jmst.2021.11.063 · ExternalCitation · doi-reference
Toward a Smart Wire Arc Additive Manufacturing System: A Review on Current Developments and a Framework of Digital Twin
10.1016/j.jmsy.2023.01.012 · ExternalCitation · doi-reference
Towards a Digital Twin Framework in Additive Manufacturing: Machine Learning and Bayesian Optimization for Time Series Process Optimization
10.1016/j.jmsy.2024.04.023 · ExternalCitation · doi-reference
Development of Continuous Fiber Reinforced Polymer Composites Using In-Situ Co-Extrusion Towpreg Material Extrusion Process with Optimized Cooling and Evaluation of Their Mechanical Performance and Quality
10.1016/j.jsamd.2025.100966 · ExternalCitation · doi-reference
A Novel Free-Hanging 3D Printing Method for Continuous Carbon Fiber Reinforced Thermoplastic Lattice Truss Core Structures
10.1016/j.matdes.2017.10.007 · ExternalCitation · doi-reference
Carbon Fibre Damage during 3D Printing of Polymer Matrix Laminates Using the FDM Process
10.1016/j.matdes.2021.109679 · ExternalCitation · doi-reference
Strength and Its Variability in 3D Printing of Polymer Composites with Continuous Fibers
10.1016/j.matdes.2022.111505 · ExternalCitation · doi-reference
Big Data, Machine Learning, and Digital Twin Assisted Additive Manufacturing: A Review
10.1016/j.matdes.2024.113086 · ExternalCitation · doi-reference
Topology and Fiber Path Optimization of Composite Structures: A Critical Review
10.1016/j.matdes.2025.113699 · ExternalCitation · doi-reference
Optimising 3D-Printed Carbon Fibre Composites Using Machine Learning: Balancing Strength and Efficiency
10.1016/j.matdes.2025.114325 · ExternalCitation · doi-reference
Suppressing Torsional Deformation in MEX 3D-Printed Metal and Ceramic Components via Printing Process Optimization
10.1016/j.matdes.2026.115616 · ExternalCitation · doi-reference
A Review on PEEK Composites—Manufacturing Methods, Properties and Applications
10.1016/j.matpr.2020.07.124 · ExternalCitation · doi-reference
Effect of Fiber Volume Fraction on the Impact Strength of Fiber Reinforced Polymer Composites Made by FDM Process
10.1016/j.matpr.2020.12.262 · ExternalCitation · doi-reference
10.1016/j.matpr.2023.11.033
10.1016/j.matpr.2023.11.033 · ExternalCitation · doi-reference
Preparation of Pre-Impregnated Continuous Carbon Fiber Reinforced Nylon6 Filaments and the Mechanical Properties of 3D Printed Composites
10.1016/j.mtcomm.2023.106163 · ExternalCitation · doi-reference
Self-Adaptive Multimodal Temporal Intelligence for Autonomous Defect-Free Material Deposition in Additive Manufacturing
10.1016/j.nxmate.2026.102326 · ExternalCitation · doi-reference
Tailoring Thermal Conductivity and Printability in Boron Nitride/Epoxy Nano- and Micro-Composites for Material Extrusion 3D Printing
10.1016/j.polymer.2024.127899 · ExternalCitation · doi-reference
Multi-Axis Additive Manufacturing Process for Continuous Fibre Reinforced Composite Parts
10.1016/j.procir.2019.09.022 · ExternalCitation · doi-reference
Optimization of 3D Printing Parameters to Minimize Residual Stresses in Maraging Steel
10.1016/j.prostr.2026.01.067 · ExternalCitation · doi-reference
Deep Learning-Assisted Real-Time Defect Detection and Closed-Loop Adjustment for Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites
10.1016/j.rcim.2022.102431 · ExternalCitation · doi-reference
Towards Intelligent Cooperative Robotics in Additive Manufacturing: Past, Present, and Future
10.1016/j.rcim.2024.102925 · ExternalCitation · doi-reference
Hybrid Effect of 3D-Printed Coaxial Continuous Hybrid Fibre-Reinforced Composites
10.1016/j.tws.2023.110820 · ExternalCitation · doi-reference
High-Performance Bending in 3D-Printed Reinforced-Rib Corrugated Composites via Continuous Fiber Additive Manufacturing: A Hybrid Experimental-Computational Approach
10.1016/j.tws.2025.113905 · ExternalCitation · doi-reference
Multisensor Fusion-Based Digital Twin in Additive Manufacturing for in-situ Quality Monitoring and Defect Correction
10.1017/pds.2023.276 · ExternalCitation · doi-reference
Design and Extrusion-Based 3D Printing of Continuous Fiber Composites: Status, Challenges, and Opportunities
10.1021/acs.langmuir.4c00139 · ExternalCitation · doi-reference
4D-Printed Shape Memory Polymer Composites: Innovations in Smart Structures, Processing Strategies, and Application Prospects
10.1021/acsapm.5c02816 · ExternalCitation · doi-reference
Electrothermally Controlled Origami Fabricated by 4D Printing of Continuous Fiber-Reinforced Composites
10.1038/s41467-024-46591-3 · ExternalCitation · doi-reference
Sub-Surface Thermal Measurement in Additive Manufacturing via Machine Learning-Enabled High-Resolution Fiber Optic Sensing
10.1038/s41467-024-51235-7 · ExternalCitation · doi-reference
4D Printing of Liquid Crystal Elastomer Composites with Continuous Fiber Reinforcement
10.1038/s41467-024-52716-5 · ExternalCitation · doi-reference
Multiscale Computational Modeling of 3D Printed Continuous Fiber Reinforced Polymer Composites
10.1038/s41598-025-01556-4 · ExternalCitation · doi-reference
Recent Advances in Design Optimization and Additive Manufacturing of Composites: From Enhanced Mechanical Properties to Innovative Functionalities
10.1038/s44334-025-00040-1 · ExternalCitation · doi-reference
Three-Dimensional Printing of Continuous-Fiber Composites by in-Nozzle Impregnation
10.1038/srep23058 · ExternalCitation · doi-reference
Epoxy Composite with High Thermal Conductivity by Constructing 3D-Oriented Carbon Fiber and BN Network Structure
10.1039/d1ra04602k · ExternalCitation · doi-reference
Dimensional Synergy in 3D Thermally Conductive Boron Nitride/Polymer Composites
10.1063/5.0243023 · ExternalCitation · doi-reference
3D Printing with Tension and Compaction: Prevention of Fiber Waviness in 3D-Printed Continuous Carbon Fiber–Reinforced Thermoplastics
10.1080/09243046.2023.2260233 · ExternalCitation · doi-reference
Topology Optimization of Continuous Fiber-Reinforced Composite (CFRC) Structures Considering the Residual Stress in Additive Manufacturing
10.1080/15376494.2023.2241043 · ExternalCitation · doi-reference
Performance and Failure Modes of Continuous Fibre-Reinforced Energy Absorption Tubes by Cylindrical Layered 3D Printing
10.1080/17452759.2024.2367122 · ExternalCitation · doi-reference
Autonomous Intelligent Additive Manufacturing of Continuous Fiber-Reinforced Composites: Data-Enhanced Knowledgebase and Multi-Sensor Fusion
10.1080/17452759.2024.2412192 · ExternalCitation · doi-reference
4D-Printed Fiber-Reinforced Liquid Crystal Elastomer Composites for Multifunctional Soft Robots with Self-Heating Actuation
10.1080/17452759.2025.2499927 · ExternalCitation · doi-reference
Electrothermal Shape Memory Behavior and Recovery Force of Four-Dimensional Printed Continuous Carbon Fiber/Polylactic Acid Composite
10.1088/1361-665x/abd912 · ExternalCitation · doi-reference
Effects of Porosity on the Mechanical Properties of Additively Manufactured Components: A Critical Review
10.1088/2053-1591/abcc5d · ExternalCitation · doi-reference
Optimization of 3D Printing Parameters for Enhanced Tensile Properties in Continuous Carbon Fiber Reinforced PLA Composites
10.1088/2053-1591/adc5cc · ExternalCitation · doi-reference
10.1109/dtpi61353.2024.10778908
10.1109/dtpi61353.2024.10778908 · ExternalCitation · doi-reference
A Phase-Field-Based Graded-Material Topology Optimization with Stress Constraint
10.1142/s0218202520500281 · ExternalCitation · doi-reference
10.1145/3623263.3623356
10.1145/3623263.3623356 · ExternalCitation · doi-reference
Neural Co-Optimization of Structural Topology, Manufacturable Layers, and Path Orientations for Fiber-Reinforced Composites
10.1145/3730922 · ExternalCitation · doi-reference
Path-Dependent Progressive Failure Analysis for 3D-Printed Continuous Carbon Fibre Reinforced Composites
10.1186/s10033-024-01054-0 · ExternalCitation · doi-reference
Systematic Review of Digital Twin Technology and Applications
10.1186/s42492-023-00137-4 · ExternalCitation · doi-reference
Layup Sequence and Interfacial Bonding of Additively Manufactured Polymeric Composite: A Brief Review
10.1515/ntrev-2021-0116 · ExternalCitation · doi-reference
Fused Deposition Modeling 3D Printing of Continuous Natural and Regeneration Fibers Reinforced Polymer Composites and Its Mechanical Properties under Extreme Environmental Conditions—A Critical Review
10.15376/biores.20.2.zhang · ExternalCitation · doi-reference
Preparation and 3D Printing of High-Thermal-Conductivity Continuous Mesophase-Pitch-Based Carbon Fiber/Epoxy Composites
10.1631/jzus.a2200413 · ExternalCitation · doi-reference
10.20944/preprints202310.0758.v1
10.20944/preprints202310.0758.v1 · ExternalCitation · doi-reference
10.20944/preprints202407.0887.v1
10.20944/preprints202407.0887.v1 · ExternalCitation · doi-reference
10.20944/preprints202506.2516.v1
10.20944/preprints202506.2516.v1 · ExternalCitation · doi-reference
10.2514/6.2024-2288
10.2514/6.2024-2288 · ExternalCitation · doi-reference
Mechanical Properties and Fracture Behavior of 3D Printed Continuous Glass Fiber Reinforced PEEK Composite
10.32604/jpm.2025.063324 · ExternalCitation · doi-reference
10.3390/app122111211
10.3390/app122111211 · ExternalCitation · doi-reference
10.3390/app13105914
10.3390/app13105914 · ExternalCitation · doi-reference
10.3390/app142210100
10.3390/app142210100 · ExternalCitation · doi-reference
10.3390/engproc2024076096
10.3390/engproc2024076096 · ExternalCitation · doi-reference
10.3390/fib13110145
10.3390/fib13110145 · ExternalCitation · doi-reference
10.3390/jcs5120325
10.3390/jcs5120325 · ExternalCitation · doi-reference
10.3390/jcs6050128
10.3390/jcs6050128 · ExternalCitation · doi-reference
10.3390/jcs9050218
10.3390/jcs9050218 · ExternalCitation · doi-reference
10.3390/jmmp8030095
10.3390/jmmp8030095 · ExternalCitation · doi-reference
10.3390/jmmp9060179
10.3390/jmmp9060179 · ExternalCitation · doi-reference
10.3390/ma13020471
10.3390/ma13020471 · ExternalCitation · doi-reference
10.3390/ma15238521
10.3390/ma15238521 · ExternalCitation · doi-reference
10.3390/ma16237311
10.3390/ma16237311 · ExternalCitation · doi-reference
10.3390/ma18092113
10.3390/ma18092113 · ExternalCitation · doi-reference
10.3390/polym12102188
10.3390/polym12102188 · ExternalCitation · doi-reference
10.3390/polym13091450
10.3390/polym13091450 · ExternalCitation · doi-reference
10.3390/polym13101653
10.3390/polym13101653 · ExternalCitation · doi-reference
10.3390/polym14030426
10.3390/polym14030426 · ExternalCitation · doi-reference
10.3390/polym14040819
10.3390/polym14040819 · ExternalCitation · doi-reference
10.3390/polym14091838
10.3390/polym14091838 · ExternalCitation · doi-reference
10.3390/polym14183800
10.3390/polym14183800 · ExternalCitation · doi-reference
10.3390/polym14214659
10.3390/polym14214659 · ExternalCitation · doi-reference
10.3390/polym15163412
10.3390/polym15163412 · ExternalCitation · doi-reference
10.3390/polym15173653
10.3390/polym15173653 · ExternalCitation · doi-reference
10.3390/polym15183740
10.3390/polym15183740 · ExternalCitation · doi-reference
10.3390/polym15183743
10.3390/polym15183743 · ExternalCitation · doi-reference
10.3390/polym15183839
10.3390/polym15183839 · ExternalCitation · doi-reference
10.3390/polym16010108
10.3390/polym16010108 · ExternalCitation · doi-reference
10.3390/polym16060831
10.3390/polym16060831 · ExternalCitation · doi-reference
10.3390/polym16121622
10.3390/polym16121622 · ExternalCitation · doi-reference
10.3390/polym16212996
10.3390/polym16212996 · ExternalCitation · doi-reference
10.3390/polym17121601
10.3390/polym17121601 · ExternalCitation · doi-reference
10.3390/pr12061062
10.3390/pr12061062 · ExternalCitation · doi-reference
Shape Memory Polymer Composites: 4D Printing, Smart Structures, and Applications
10.34133/research.0234 · ExternalCitation · doi-reference
