Abstract
Abstract
Centreline macrosegregation is often observed in continuous slab casting of steel. Two of the main macrosegregation formation mechanisms are bulging and feeding. Both were studied and compared in the current work by using a two‐phase volume averaging model considering only columnar solidification. The casting of the strand itself is modelled by applying a predefined velocity following the casting speed and solid shell deformation (e.g. bulging). Three different cases are simulated and discussed. (i) The first case considers the influence of the feeding flow during solidification without taking bulging into account. Negative macrosegregation is observed in the centre of the casting in this case. (ii) The second case takes the flow caused by series of bulging along the solidifying strand shell into account, and is, therefore, representative for an ideal situation where bulging takes place without solidification shrinkage. In this case positive centreline segregation is found. (iii) The last case shows the results of a simulation which combines both shrinkage‐ and bulging‐induced flows. It is found that under the current casting conditions the bulging effect dominates over the shrinkage effect, and so positive centreline segregation is predicted.