Abstract
Abstract
The definition of soil stabilization is a method to enhance the engineering properties. Polyurethane grout is one of the least expensive methods and can be used in construction. Polyurethane injection resin systems for crack injection, slab lifting, soil stabilization, leak sealing, and structural crack repair have been used for the last two decades. Polyurethane foam hasn't been used or understood as a loaded structural element in soils like as embedded piles. In this piece of work, a trial was made to numerically study the behavior of polyurethane foam when used as piles embedded in the clay and sand soils. Plaxis 3D software was adopted to carry out this study. Polyurethane piles of varying diameters and lengths were modelled as embedments in the clay and sand soil, and then incremental loads were applied. Moreover, the study involved the behavior of polyurethane piles when the clay strength was increased. The results indicated that embedded pile resistance to loading increased with the increase in length and pile diameter. When the loading results of polyurethane foam embedded in loose sand are compared with the loading results of piles in soft clay, the ultimate capacity of piles in loose sand, was much higher than that in soft clay. The results also indicated that the polyurethane pile load-carrying capacity increased when L/D ratio decreased for both soft and stiff clay. In this study concrete piles in clay and sand soil were modelled to examine the percentage of loading capacity of concrete piles to that of polyurethane piles for clay and sand soil.