Abstract
No public abstract is available from the verified source records.
Ashok Jeshurun, Irfan Mohammad, Bogala Mallikharjuna Reddy
Abstract
Authors
Institutions
Provenance
crossref
Confidence 100%
openalex
Confidence 95%
datacite
Confidence 0%
No local reference links have been materialized yet.
No local citing links have been materialized yet.
10.3390/books978-3-03842-549-6
10.3390/books978-3-03842-549-6
Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials
10.1016/s0927-796x(00)00012-7 · 2000
Redox-based supercapacitor materials: a review
10.1080/14328917.2023.2223943 · 2024
Unresolved referenced work
2011
Transient thermal stress behavior in ZrO2-toughened Al2O3
10.1111/j.1151-2916.1981.tb09555.x · 1981
Fast route to obtain Al2O3-based nanocomposites employing graphene oxide: synthesis and sintering
10.1016/j.materresbull.2014.12.075 · 2015
Three-dimensional (3D) printing of hydroxyapatite-based scaffolds: a review
10.1016/j.bprint.2022.e00244 · 2022
Stereolithography of SiOC polymer-derived ceramics filled with SiC micronwhiskers
10.1002/adem.201800593 · 2018
10.1007/978-1-4757-3912-1
10.1007/978-1-4757-3912-1
High-performance ceramic parts with complex shape prepared by selective laser sintering: a review
10.1080/17436753.2017.1379586 · 2018
3D printing of ceramics: a review
10.1016/j.jeurceramsoc.2018.11.013 · 2019
Mechanics of nozzle clogging during direct ink writing of fiber-reinforced composites
10.1016/j.addma.2020.101701 · 2021
Additive manufacture of ceramics components by inkjet printing
10.15302/j-eng-2015014 · 2015
Binder jetting additive manufacturing of aluminum nitride components
10.1016/j.ceramint.2019.03.187 · 2019
Fe2O3/graphene nanocomposites as heterogeneous Fenton catalysts: correlation studies on catalyst dosage, graphene loading and adsorption kinetics on methylene blue degradation
10.1557/s43579-021-00116-x · 2021
Reinforcement with reduced graphene oxide of bioactive glass scaffolds fabricated by robocasting
10.1016/j.jeurceramsoc.2016.12.047 · 2017
Extrusion-based 3D printing of ceramic components
10.1016/j.procir.2015.04.028 · 2015
Calcium silicate ceramic scaffolds toughened with hydroxyapatite whiskers for bone tissue engineering
10.1016/j.matchar.2014.08.017 · 2014
Direct ink writing of ceramic matrix composite structures
10.1111/jace.15045 · 2017
Micro/nano multiscale reinforcing strategies toward extreme high-temperature applications: take carbon/carbon composites and their coatings as the examples
10.1016/j.jmst.2021.03.076 · 2022
Three-dimensional printing of SiSiC lattice truss structures
10.1016/j.msea.2012.09.107 · 2013
The rise of graphene
10.1038/nmat1849 · 2007
Unresolved referenced work
Kept as external metadata until matched
Freeform fabrication of ceramics via stereolithography
10.1111/j.1151-2916.1996.tb09022.x · 1996
Ultrasonic vibration-assisted laser engineering net shaping of ZrO2-Al2O3 bulk parts: effects on crack suppression, microstructure, and mechanical properties
10.1016/j.ceramint.2017.11.013 · 2018
Helical microtubules of graphitic carbon
10.1038/354056a0 · 1991
A photoluminescence study of nitrogen-doped carbon quantum dots/hydroxyapatite (NCQDs/HAp) nanocomposites
10.1080/10667857.2021.1879529 · 2022
Characteristics of cement mortar with nano-SiO2 particles
10.1016/j.conbuildmat.2005.12.020 · 2007
Direct ink writing of ZrB2-SiC chopped fiber ceramic composites
10.1016/j.addma.2021.102049 · 2021
Composites with carbon nanotubes and graphene: an outlook
10.1126/science.aat7439 · 2018
Silicon carbide based one-dimensional nanostructure growth: towards electronics and biology perspectives
10.1088/0022-3727/47/20/203001 · 2014
A review on nanocomposites. part 1: mechanical properties
2020
Recent advances in the stereolithographic three-dimensional printing of ceramic cores: challenges and prospects
10.1016/j.jmst.2021.10.041 · 2022
Additive manufacturing of SiBCN/Si3N4 w composites from preceramic polymers by digital light processing
10.1039/c9ra09598e · 2020
Modeling analysis of grain morphologies in directed energy deposition (DED) coating with different laser scanning patterns
10.1016/j.matlet.2019.05.027 · 2019
Carbon nanotubes reinforced alumina matrix nanocomposites for conductive ceramics by additive manufacturing
10.1016/j.promfg.2020.05.111 · 2020
Additive manufacturing of structural materials
10.1016/j.mser.2020.100596 · 2021
Feasibility of preparing of silicon nitride ceramics components by aqueous tape casting in combination with laminated object manufacturing
10.1016/j.matdes.2014.10.079 · 2015
Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration
10.1007/s40145-021-0512-z · 2021
Manufacturing properties of turbine blades of carbon fiber-reinforced sic composite based on stereolithography
10.1080/10426914.2013.872269 · 2014
Challenges and opportunities in graphene commercialization
10.1038/nnano.2014.225 · doi-reference
Effects of short carbon fiber on the macro-properties, mechanical performance and microstructure of SiSiC composite fabricated by selective laser sintering
10.1016/j.ceramint.2020.01.255 · doi-reference
3D printing strong and conductive geo-polymer nanocomposite structures modified by graphene oxide
10.1016/j.carbon.2017.02.102 · doi-reference
Improved mechanical properties of SiC fiber reinforced silica-based ceramic cores fabricated by stereolithography
10.1016/j.jmst.2021.12.012 · doi-reference
Enhanced superconducting properties and microstructures of Y0.5Gd0.5B2C3O7-δ/LaGdZr2O7/Y0.5Gd0.5Ba2Cu3O7-δ film
10.1016/j.ceramint.2020.07.012 · doi-reference
Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics
10.1016/j.addma.2020.101199 · doi-reference
Short fiber reinforced 3D printed ceramic composite with shear induced alignment
10.1016/j.ceramint.2017.06.012 · doi-reference
Multifunctional silicon carbide matrix composites optimized by three-dimensional graphene scaffolds
10.1016/j.carbon.2019.08.080 · doi-reference
Three dimensional printing of carbon/carbon composites by selective laser sintering
10.1016/j.carbon.2015.09.110 · doi-reference
Preparation of alumina-toughened zirconia via 3D printing and liquid precursor infiltration: manipulation of the microstructure, the mechanical properties and the low temperature aging behavior
10.1007/s10853-019-03432-9 · doi-reference
Fabrication of dense zirconia-toughened alumina ceramics through a stereolithography-based additive manufacturing
10.1016/j.ceramint.2016.10.027 · doi-reference
Additive manufacturing of Csf/SiC composites with high fiber content by direct ink writing and liquid silicon infiltration
10.1016/j.ceramint.2021.10.176 · doi-reference
Stereolithography printing of bone scaffolds using biofunctional calcium phosphate nanoparticles
10.1016/j.jmst.2021.01.062 · doi-reference
3D-printed graphene-Al2O3 composites with complex mesoscale architecture
10.1016/j.ceramint.2017.12.234 · doi-reference
Direct ink writing additive manufacturing of porous alumina-based ceramic cores modified with nanosized MgO
10.1016/j.jeurceramsoc.2020.07.058 · doi-reference
A review on additive manufacturing of ceramic matrix composites
10.1016/j.jmst.2022.06.039 · doi-reference
Robocast zirconia-toughened alumina scaffolds: processing, structural characterisation and interaction with human primary osteoblasts
10.1016/j.jeurceramsoc.2017.08.031 · doi-reference
Status of silicon carbide composites for fusion
10.1016/s0022-3115(96)00318-2 · doi-reference
Mechanisms of tetraneedlelike ZnO whiskers reinforced forsterite/bioglass scaffolds
10.1016/j.jallcom.2015.02.077 · doi-reference
Ceramic-based nanocomposites: a perspective from carbonaceous nanofillers
10.1016/j.mtcomm.2022.103764 · doi-reference
Mechanical and electrical properties of silicon nitride–silicon carbide nanocomposite material
10.1111/j.1151-2916.1991.tb04357.x · doi-reference
Polymer-derived ceramic/graphene oxide architected composite with high electrical conductivity and enhanced thermal resistance
10.1016/j.jeurceramsoc.2017.12.060 · doi-reference
Electrically functional 3D-architectured graphene/SiC composites
10.1016/j.carbon.2015.12.103 · doi-reference
Hybridization of additive manufacturing processes to build ceramic/metal parts: example of LTCC
10.1016/j.jeurceramsoc.2019.10.019 · doi-reference
Dielectric and piezoelectric properties in selective laser sintered polyamide11/BaTiO3/CNT ternary nanocomposites
10.1016/j.matdes.2018.01.050 · doi-reference
Fabrication of silicon carbide fiber-reinforced silicon carbide matrix composites using binder jetting additive manufacturing from irregularly-shaped and spherical powders
10.3390/ma13071766 · doi-reference
Integrating digital light processing with direct ink writing for hybrid 3D printing of functional structures and devices
10.1016/j.addma.2021.101911 · doi-reference
Mesoporous graphitic carbon nitride/hydroxyapatite (g-C3N4/HAp) nanocomposites for highly efficient photocatalytic degradation of rhodamine B dye
10.1016/j.mtcomm.2022.104788 · doi-reference
Electrical resistivity of ceramic–metal composite materials: application in crucibles for induction furnaces
10.1016/s0272-8842(99)00059-0 · doi-reference
An overview of zirconia ceramics: basic properties and clinical applications
10.1016/j.jdent.2007.07.008 · doi-reference
Fabrication of SiC whisker-reinforced SiC ceramic matrix composites based on 3D printing and chemical vapor infiltration technology
10.1016/j.jeurceramsoc.2019.04.043 · doi-reference
Microstructure control of highly oriented short carbon fibres in SiC matrix composites fabricated by direct ink writing
10.1016/j.ceramint.2019.05.283 · doi-reference
Research progress of ceramic matrix composite parts based on additive manufacturing technology
10.1080/17452759.2019.1607759 · doi-reference
Manufacturing properties of turbine blades of carbon fiber-reinforced sic composite based on stereolithography
10.1080/10426914.2013.872269 · doi-reference
Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration
10.1007/s40145-021-0512-z · doi-reference
Feasibility of preparing of silicon nitride ceramics components by aqueous tape casting in combination with laminated object manufacturing
10.1016/j.matdes.2014.10.079 · doi-reference
Additive manufacturing of structural materials
10.1016/j.mser.2020.100596 · doi-reference
Carbon nanotubes reinforced alumina matrix nanocomposites for conductive ceramics by additive manufacturing
10.1016/j.promfg.2020.05.111 · doi-reference
Modeling analysis of grain morphologies in directed energy deposition (DED) coating with different laser scanning patterns
10.1016/j.matlet.2019.05.027 · doi-reference
Additive manufacturing of SiBCN/Si3N4 w composites from preceramic polymers by digital light processing
10.1039/c9ra09598e · doi-reference