Abstract
No public abstract is available from the verified source records.
Shreya Mukherjee, Prithvi D. Awasthi, Priyanka Agrawal, Rajiv S. Mishra
Abstract
Authors
Institutions
Provenance
crossref
Confidence 100%
openalex
Confidence 95%
datacite
Confidence 0%
No local reference links have been materialized yet.
No local citing links have been materialized yet.
Fatigue in metals and alloys
10.1038/s41563-025-02308-5 · 2026
Elevated temperature low cycle fatigue behaviour of Haynes 282 and its correlation with microstructure – Effect of ageing conditions
10.1016/j.msea.2019.138073 · 2019
Fatigue dataset of high-entropy alloys
10.1038/s41597-022-01368-5 · 2022
Crystallographic evaluation of low cycle fatigue crack growth in a polycrystalline Ni based superalloy
10.1016/j.ijplas.2021.103174 · 2022
A TRIP-assisted dual-phase high-entropy alloy: grain size and phase fraction effects on deformation behavior
10.1016/j.actamat.2017.03.069 · 2017
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
10.1038/nature17981 · 2016
Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity
10.1016/j.actamat.2017.07.023 · 2017
High-entropy alloys: a critical review
10.1080/21663831.2014.912690 · 2014
Theory of strengthening in fcc high entropy alloys
10.1016/j.actamat.2016.07.040 · 2016
Effects of the stacking fault energy fluctuations on the strengthening of alloys
10.1016/j.actamat.2018.09.066 · 2019
Design of a twinning-induced plasticity high entropy alloy
10.1016/j.actamat.2015.04.014 · 2015
Impact of metastability engineered low energy interfaces on synergistic enhancement of strength and strain hardening through deformation-driven bidirectional transformation
10.1016/j.actamat.2025.121352 · 2025
Deformation-driven bidirectional transformation promotes bulk nanostructure formation in a metastable interstitial high entropy alloy
10.1016/j.actamat.2019.01.030 · 2019
The enhanced static recrystallization kinetics of a non-equiatomic high entropy alloy through the reverse transformation of strain induced martensite
10.1016/j.jallcom.2019.07.105 · 2019
Additive friction stir deposition of Fe-Cr-Ni transformative alloy
10.1016/j.matdes.2025.114146 · 2025
Discovery and design of fatigue-resistant high-entropy alloys
10.1016/j.scriptamat.2020.05.047 · 2020
Cyclic deformation of AISI-310 stainless steel—II. Saturation dislocation structures
10.1016/0956-7151(90)90081-q · 1990
Quantitative evaluations for strain amplitude dependent organization of dislocation structures due to cyclic plasticity in austenitic stainless steel 316L
10.1016/j.actamat.2008.02.005 · 2008
Creep-fatigue response, failure mode and deformation mechanism of HAYNES 282 Ni based superalloy: effect of dwell position and time
10.1016/j.ijfatigue.2022.106820 · 2022
Enhancement of fatigue resistance by overload-induced deformation twinning in a CoCrFeMnNi high-entropy alloy
10.1016/j.actamat.2020.10.016 · 2020
The temperature sensitivity of creep near room temperature in a Ti-6wt%Al alloy
10.1007/s10853-025-11345-z · 2025
Biaxial in-phase and out-of-phase cyclic deformation and fatigue behavior of an austenitic TRIP steel
10.1016/j.ijfatigue.2014.02.007 · 2014
On the microstructure evolution during isothermal low cycle fatigue of β-annealed Ti-6242S titanium alloy: internal damage mechanism, substructure development and early globularization
10.1016/j.ijfatigue.2018.07.014 · 2018
Effect of strain amplitude on the low-cycle fatigue behavior of a new Fe–15Mn–10Cr–8Ni–4Si seismic damping alloy
10.1016/j.ijfatigue.2016.03.021 · 2016
Effect of γ to ε martensitic transformation on low-cycle fatigue behaviour and fatigue microstructure of Fe–15Mn–10Cr–8Ni–xSi austenitic alloys
10.1016/j.actamat.2015.12.002 · 2016
Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses
10.1016/j.actamat.2004.03.011 · 2004
Derivation and variation in composition-dependent stacking fault energy maps based on subregular solution model in high-manganese steels
10.1007/s11661-009-0050-8 · 2009
Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel
10.1016/j.actamat.2016.06.037 · 2016
Excellent high cyclic fatigue properties of a novel ultrafine-grained medium entropy alloy
10.1016/j.msea.2020.139122 · 2020
Hierarchical microstructure for improved fatigue properties in a eutectic high entropy alloy
10.1016/j.scriptamat.2018.07.022 · 2018
Fatigue behavior of ultrafine grained triplex Al0.3CoCrFeNi high entropy alloy
10.1016/j.scriptamat.2018.08.048 · 2019
Metastability-assisted fatigue behavior in a friction stir processed dual-phase high entropy alloy
10.1080/21663831.2018.1523240 · 2018
Low-cycle fatigue properties of CoCrFeMnNi high-entropy alloy compared with its conventional counterparts
10.1016/j.msea.2020.139661 · 2020
Deformation mechanisms of CoCrFeMnNi high-entropy alloy under low-cycle-fatigue loading
10.1016/j.actamat.2021.117089 · 2021
Low-cycle fatigue behavior and deformation mechanisms of a dual-phase Al0.5CoCrFeMnNi high-entropy alloy
10.1016/j.ijfatigue.2022.107075 · 2022
Superior low-cycle fatigue properties of CoCrNi compared to CoCrFeMnNi
10.1016/j.scriptamat.2020.113667 · 2021
Influence of hydrogen on the low cycle fatigue behavior of the equiatomic CrMnFeCoNi high entropy alloy
10.1016/j.ijfatigue.2025.109414 · 2026
Origin of superior low-cycle fatigue resistance of an interstitial metastable high-entropy alloy
10.1016/j.jmst.2021.10.010 · 2022
Low-cycle fatigue behavior and surface treatment of a twinning-induced plasticity high-entropy alloy
10.1016/j.msea.2022.143724 · 2022
The astonishing effect of Si addition on low-cycle fatigue life in a metastable high-entropy alloy
10.1016/j.msea.2023.144985 · 2023
Reversible deformation-induced martensitic transformation in Al0.6CoCrFeNi high-entropy alloy investigated by in situ synchrotron-based high-energy X-ray diffraction
10.1016/j.actamat.2017.02.014 · doi-reference
A remarkable improvement of low-cycle fatigue resistance of high-Mn austenitic TWIP alloys with similar tensile properties: importance of slip mode
10.1016/j.actamat.2016.07.034 · doi-reference
A study of fatigue damage mechanisms in Waspaloy from 25 to 800°C
10.1016/0025-5416(84)90177-0 · doi-reference
Low cycle fatigue behaviour of a precipitation hardened Cu-Ni-Si alloy
10.1016/j.ijfatigue.2016.07.019 · doi-reference
Low-cycle fatigue behavior of a high manganese austenitic twin-induced plasticity steel
10.1016/j.msea.2013.07.020 · doi-reference
Strain controlled isothermal low cycle fatigue life, deformation and fracture characteristics of Superni 263 superalloy
10.1016/j.msea.2019.05.119 · doi-reference
Low cycle fatigue behavior of precipitation-strengthened Cu-Cr-Zr contact wires
10.1016/j.ijfatigue.2020.105642 · doi-reference
A study of the back stress and the friction stress behaviors of Ti-6Al-4V alloy during low cycle fatigue at room temperature
10.1016/j.msea.2017.06.051 · doi-reference
Overview of fatigue properties of fine grain 5056 Al-Mg alloy processed by equal-channel angular pressing
10.1016/s0921-5093(00)01682-8 · doi-reference
Effect of strain rate on the high-temperature low-cycle fatigue properties of a nimonic PE-16 superalloy
10.1007/bf02646684 · doi-reference
Low-cycle and extremely-low-cycle fatigue behaviors of high-Mn austenitic TRIP/TWIP alloys: property evaluation, damage mechanisms and life prediction
10.1016/j.actamat.2015.11.015 · doi-reference
On the low-cycle fatigue response of pre-strained austenitic Fe61Mn24Ni6.5Cr8.5 alloy showing TWIP effect
10.1016/j.ijfatigue.2012.01.002 · doi-reference
Micro-mechanisms of microstructural damage due to low cycle fatigue in CoCuFeMnNi high entropy alloy
10.1016/j.ijfatigue.2019.105258 · doi-reference
On the role of twinning and stacking faults on the crystal plasticity and grain refinement in magnesium alloys
10.1016/j.actamat.2017.11.004 · doi-reference
Tensile overload-induced texture effects on the fatigue resistance of a CoCrFeMnNi high-entropy alloy
10.1016/j.actamat.2022.118585 · doi-reference
Ductility enhancement and superelasticity in Fe–Ni–Co–Al–Ti–B polycrystalline alloy
10.1016/j.jallcom.2014.07.136 · doi-reference
Generation, development and degradation of the intrinsic two-way shape memory effect in different alloy systems
10.1016/s1359-6454(01)00342-1 · doi-reference
Unexpected cyclic stress-strain response of dual-phase high-entropy alloys induced by partial reversibility of deformation
10.1016/j.scriptamat.2017.09.013 · doi-reference
Vibration mitigation by the reversible fcc/hcp martensitic transformation during cyclic tension–compression loading of an Fe–Mn–Si-based shape memory alloy
10.1016/j.scriptamat.2006.02.013 · doi-reference
Reversible dislocation movement, martensitic transformation and nano-twinning during elastic cyclic loading of a metastable high entropy alloy
10.1016/j.actamat.2019.12.040 · doi-reference
Mechanism of reversible transformation-induced plasticity of Fe–Mn–Si shape memory alloys
10.1016/j.scriptamat.2008.06.030 · doi-reference
Importance of crack-propagation-induced ε-martensite in strain-controlled low-cycle fatigue of high-Mn austenitic steel
10.1080/09500839.2015.1052029 · doi-reference
Stacking faults and f.c.c. (γ) → h.c.p. (ϵ) transformation in 188-type stainless steel
10.1016/0001-6160(72)90104-6 · doi-reference
A model for the FCC→HCP transformation, its applications, and experimental evidence
10.1007/bf02661642 · doi-reference
Cyclic stress-strain response and martensitic transformation behavior for type 304 stainless steel
10.4028/www.scientific.net/amm.510.114 · doi-reference
The strain induced martensite transformation in austenitic stainless steels: part 2 – effect of internal stresses on mechanical response
10.1179/174328408x295980 · doi-reference
Dynamic observation of the collapse process of a stacking fault tetrahedron by moving dislocations
10.1016/j.jnucmat.2004.04.069 · doi-reference
Multiple origins of extra electron diffractions in fcc metals
10.1126/sciadv.adn9673 · doi-reference
Superior tensile creep behavior of a novel oxide dispersion strengthened CrCoNi multi-principal element alloy
10.1016/j.actamat.2023.119032 · doi-reference
Microstructural origins of high-temperature properties of 3D printable CrCoNi-based ODS multi-principal element alloys
10.1016/j.actamat.2026.122102 · doi-reference
Mechanisms and kinetics of the early fatigue damage in crystalline materials
10.1016/j.msea.2006.06.148 · doi-reference
Stacking fault tetrahedra in fatigued stainless steel
10.1016/0001-6160(67)90105-8 · doi-reference
Story of stacking fault tetrahedra
10.1016/s0254-0584(97)80250-7 · doi-reference
Direct transformation of vacancy voids to stacking fault tetrahedra
10.1103/physrevlett.99.135501 · doi-reference
Atomic-scale dynamic process of deformation-induced stacking fault tetrahedra in gold nanocrystals
10.1038/ncomms3340 · doi-reference
On the distribution of impurity atoms in the stress field of a dislocation
10.1016/0001-6160(58)90166-4 · doi-reference
Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy
10.1038/s41467-021-23689-6 · doi-reference
Low cycle fatigue behavior and deformation mechanism of different microstructures in Ti-5Al-5Mo-5V-3Cr alloy
10.1016/j.ijfatigue.2021.106238 · doi-reference
On the low-cycle fatigue response of CoCrNiFeMn high entropy alloy with ultra-fine grain structure
10.1016/j.actamat.2020.116540 · doi-reference
Analysis of residuals from censored data
10.1080/00401706.1973.10489105 · doi-reference