Abstract
No public abstract is available from the verified source records.
Sebastian Rulik, Jakub Ochmann, Krzysztof Rusin, Aleksander ROŻEK, Wojciech Uchman, Mirosław Szczepanik, Kamil Stańczyk, Ryszard Kaptur, D. Słowikowski, Zygmunt Bartoszek, Marian Ohl, Tomasz Mazur, Łukasz Bartela
Abstract
Authors
No local reference links have been materialized yet.
No local citing links have been materialized yet.
Energy and exergy analysis of sensible thermal energy storage—hot water tank for a large CHP plant in Poland
10.3390/en13184842 · 2020
Challenges for district heating in Poland
10.1007/s43937-023-00019-z · 2023
Wind energy in Poland–history, current state, surveys, Renewable Energy Sources Act, SWOT analysis
10.1016/j.rser.2016.05.081 · 2016
Development of the wind generation sector and its effect on the grid operation—the case of Poland
10.3390/en16196805 · 2023
Experimental and numerical analysis for the size, charging and discharging characteristics of a phase changing material as a thermal energy storage
10.1016/j.est.2022.106228 · 2023
Numerical investigation on phase change materials (PCM): the melting process of erythritol in spheres under different thermal conditions
10.1016/j.ijmecsci.2018.08.006 · 2018
Numerical simulation study on discharging process of the direct-contact phase change energy storage system
10.1016/j.apenergy.2015.03.108 · 2015
Unresolved referenced work
2021
10.1016/j.geoen.2023.211872
10.1016/j.geoen.2023.211872
Provenance
crossref
Confidence 100%
ror
Confidence 99%
openalex
Confidence 95%
datacite
Confidence 0%
Thermodynamic optimization of ground heat exchangers with single U-tube by entropy generation minimization method
10.1016/j.enconman.2012.07.013 · 2013
Assessing the technical potential for underground thermal energy storage in the UK
10.1016/j.rser.2024.114545 · 2024
Experimental and computational analysis of packed-bed thermal energy storage tank designed for adiabatic compressed air energy storage system
10.1016/j.applthermaleng.2022.118750 · 2022
Solution for post-mining sites: thermo-economic analysis of a large-scale integrated energy storage system
10.3390/en17081970 · 2024
Evaluation of the energy potential of an adiabatic compressed air energy storage system based on a novel thermal energy storage system in a post mining shaft
10.1016/j.est.2022.105282 · 2022
Enhancement of conventional concrete mix designs for sensible thermal energy storage applications
10.1016/j.est.2023.106735 · 2023
Design and experimental testing of a 150 kWh thermal battery using thermosiphons embedded in a concrete matrix for power plant flexible operation
10.1016/j.energy.2023.127670 · 2023
Investigation of two concrete thermal energy storage system configurations for continuous power production
10.1016/j.est.2022.104387 · 2022
Thermal energy storage in concrete: A comprehensive review on fundamentals, technology and sustainability
2023
Thermal energy storage in concrete: review, testing, and simulation of thermal properties at relevant ranges of elevated temperature
10.1016/j.cemconres.2023.107096 · 2023
Long-term performance results of concrete-based modular thermal energy storage system
10.1016/j.est.2019.04.009 · 2019
Recent developments in the design of vertical borehole ground heat exchangers for cost reduction and thermal energy storage
10.1115/1.4050418 · 2021
Advances in ground heat exchangers and thermal energy storage for sustainable energy systems
10.1080/00194506.2025.2454246 · 2025
Unresolved referenced work
Kept as external metadata until matched
Unresolved referenced work
2015
Unresolved referenced work
1995
Temperature-dependent thermal conductivity of high strength lightweight raw perlite aggregate concrete
10.1007/s10765-010-0826-5 · 2010
Enhancement of conventional concrete mix designs for sensible thermal energy storage applications
10.1016/j.est.2023.106735 · 2023
Temperature-dependent thermal conductivity of high strength lightweight raw perlite aggregate concrete
10.1007/s10765-010-0826-5 · doi-reference
Advances in ground heat exchangers and thermal energy storage for sustainable energy systems
10.1080/00194506.2025.2454246 · doi-reference
Recent developments in the design of vertical borehole ground heat exchangers for cost reduction and thermal energy storage
10.1115/1.4050418 · doi-reference
Long-term performance results of concrete-based modular thermal energy storage system
10.1016/j.est.2019.04.009 · doi-reference
Thermal energy storage in concrete: review, testing, and simulation of thermal properties at relevant ranges of elevated temperature
10.1016/j.cemconres.2023.107096 · doi-reference
Investigation of two concrete thermal energy storage system configurations for continuous power production
10.1016/j.est.2022.104387 · doi-reference
Design and experimental testing of a 150 kWh thermal battery using thermosiphons embedded in a concrete matrix for power plant flexible operation
10.1016/j.energy.2023.127670 · doi-reference
Enhancement of conventional concrete mix designs for sensible thermal energy storage applications
10.1016/j.est.2023.106735 · doi-reference
Evaluation of the energy potential of an adiabatic compressed air energy storage system based on a novel thermal energy storage system in a post mining shaft
10.1016/j.est.2022.105282 · doi-reference
Solution for post-mining sites: thermo-economic analysis of a large-scale integrated energy storage system
10.3390/en17081970 · doi-reference
Experimental and computational analysis of packed-bed thermal energy storage tank designed for adiabatic compressed air energy storage system
10.1016/j.applthermaleng.2022.118750 · doi-reference
Assessing the technical potential for underground thermal energy storage in the UK
10.1016/j.rser.2024.114545 · doi-reference
Thermodynamic optimization of ground heat exchangers with single U-tube by entropy generation minimization method
10.1016/j.enconman.2012.07.013 · doi-reference
10.1016/j.geoen.2023.211872
10.1016/j.geoen.2023.211872 · doi-reference
Numerical simulation study on discharging process of the direct-contact phase change energy storage system
10.1016/j.apenergy.2015.03.108 · doi-reference
Numerical investigation on phase change materials (PCM): the melting process of erythritol in spheres under different thermal conditions
10.1016/j.ijmecsci.2018.08.006 · doi-reference
Experimental and numerical analysis for the size, charging and discharging characteristics of a phase changing material as a thermal energy storage
10.1016/j.est.2022.106228 · doi-reference
Development of the wind generation sector and its effect on the grid operation—the case of Poland
10.3390/en16196805 · doi-reference
Wind energy in Poland–history, current state, surveys, Renewable Energy Sources Act, SWOT analysis
10.1016/j.rser.2016.05.081 · doi-reference
Challenges for district heating in Poland
10.1007/s43937-023-00019-z · doi-reference
Energy and exergy analysis of sensible thermal energy storage—hot water tank for a large CHP plant in Poland
10.3390/en13184842 · doi-reference