Abstract
No public abstract is available from the verified source records.
Hui Cai, Qiuhui Liang, Zanwei Chen
Abstract
Authors
Institutions
Provenance
crossref
Confidence 100%
openalex
Confidence 95%
datacite
Confidence 0%
No local reference links have been materialized yet.
No local citing links have been materialized yet.
CFD analysis of flow forces and energy loss characteristics in a flapper–nozzle pilot valve with different null clearances
10.1016/j.enconman.2014.03.076 · 2014
A review of electro-hydraulic servovalve research and development
2019
The flow field modeling and performance analysis method for the pilot stage of deflector jet servo valve
10.1016/j.flowmeasinst.2025.102851 · 2025
Research on the three-dimensional turbulent jet mechanism and refined characteristic parameters of the deflector jet hydraulic amplifier
10.1063/5.0279044 · 2025
Pressure characteristics analysis of the deflector jet pilot stage under dynamic skewed velocity distribution
10.3390/aerospace12070638 · 2025
The influence of thermodynamic state of mineral hydraulic oil on flow rate through radial clearance at zero overlap inside the hydraulic components
10.2298/tsci16s5461k · 2016
Spool valve leakage behaviour
2011
Deformation and leakage mechanisms at hydraulic clearance fit in deep-sea extreme environment
10.1063/5.0009913 · 2020
Combining leakage and orifice flows in a hydraulic servovalve model
10.1115/1.1286335 · 2000
A method for improving flow control valve performance based on active differential pressure regulation
10.1016/j.measurement.2023.113271 · 2023
Unresolved referenced work
1967
Robust backstepping control via tracking differentiator for electro-hydraulic load simulator based on velocity synchronization
10.1016/j.conengprac.2025.106279 · 2025
Model-based nonlinear control of hydraulic servo systems: challenges, developments and perspectives
10.1007/s11465-018-0464-3 · 2018
Flow field simulation and a flow model of servo-valve spool valve orifice
10.1016/j.enconman.2011.05.010 · 2011
CFD analysis of the characteristics of a proportional flow control valve with an innovative opening shape
10.1016/j.enconman.2016.06.025 · 2016
Flow forces analysis of an open center hydraulic directional control valve sliding spool
10.1016/j.enconman.2005.03.010 · 2006
Enhanced model of four way valves characteristics and its validation at low temperature
10.1080/14399776.2008.10785986 · 2008
Quality evaluation method for functional edge machining of spool valve sleeve
10.1016/j.measurement.2025.116900 · 2025
A mathematical model for simulation of flow rate and chamber pressures in spool valves
10.1115/1.4041300 · 2019
Study of flow characteristics in an unloaded spool valve with positive overlap and annular slit near the neutral zone
10.1016/j.flowmeasinst.2025.102881 · 2025
Comparison of leakage level in water and oil hydraulics
10.1177/1687814017737723 · 2017
The flow model of the overlap spool valve considering the transition between laminar and turbulent flow
10.1016/j.flowmeasinst.2024.102689 · 2024
Machining process and parametric geometric characterization of functional edges in valve spools
10.1016/j.measurement.2026.121289 · 2026
Numerical study of solid particle erosion in hydraulic spool valves
10.1016/j.wear.2017.09.021 · 2017
Degradation assessment and life prediction of electro-hydraulic servo valve under erosion wear
10.1016/j.engfailanal.2013.10.017 · 2014
Prescribed performance adaptive neural network tracking control of electro-hydraulic servo system with input delay
10.1016/j.apm.2025.116591 · 2026
Output feedback model predictive control of hydraulic systems with disturbances compensation
10.1016/j.isatra.2018.12.007 · 2019
Switching event-triggered self-adjusting prescribed performance force control of electrohydraulic load simulator
10.1016/j.isatra.2025.04.010 · 2025
Developing a novel Gaussian process model predictive controller to improve the energy efficiency and tracking accuracy of the pressure servo control system
10.1016/j.jclepro.2023.138057 · 2023
Enhanced energy conservation and response accuracy of a pneumatic control system
10.1016/j.isci.2024.110797 · 2024
Unresolved referenced work
1990
Control-oriented friction modeling of hydraulic actuators based on hysteretic nonlinearity of lubricant film
10.1016/j.mechatronics.2018.05.003 · 2018
Control-oriented friction modeling of hydraulic actuators based on hysteretic nonlinearity of lubricant film
10.1016/j.mechatronics.2018.05.003 · doi-reference
Developing a novel Gaussian process model predictive controller to improve the energy efficiency and tracking accuracy of the pressure servo control system
10.1016/j.jclepro.2023.138057 · doi-reference
Switching event-triggered self-adjusting prescribed performance force control of electrohydraulic load simulator
10.1016/j.isatra.2025.04.010 · doi-reference
Output feedback model predictive control of hydraulic systems with disturbances compensation
10.1016/j.isatra.2018.12.007 · doi-reference
Prescribed performance adaptive neural network tracking control of electro-hydraulic servo system with input delay
10.1016/j.apm.2025.116591 · doi-reference
Degradation assessment and life prediction of electro-hydraulic servo valve under erosion wear
10.1016/j.engfailanal.2013.10.017 · doi-reference
Numerical study of solid particle erosion in hydraulic spool valves
10.1016/j.wear.2017.09.021 · doi-reference
Machining process and parametric geometric characterization of functional edges in valve spools
10.1016/j.measurement.2026.121289 · doi-reference
The flow model of the overlap spool valve considering the transition between laminar and turbulent flow
10.1016/j.flowmeasinst.2024.102689 · doi-reference
Comparison of leakage level in water and oil hydraulics
10.1177/1687814017737723 · doi-reference
Study of flow characteristics in an unloaded spool valve with positive overlap and annular slit near the neutral zone
10.1016/j.flowmeasinst.2025.102881 · doi-reference
A mathematical model for simulation of flow rate and chamber pressures in spool valves
10.1115/1.4041300 · doi-reference
Quality evaluation method for functional edge machining of spool valve sleeve
10.1016/j.measurement.2025.116900 · doi-reference
Enhanced model of four way valves characteristics and its validation at low temperature
10.1080/14399776.2008.10785986 · doi-reference
Flow forces analysis of an open center hydraulic directional control valve sliding spool
10.1016/j.enconman.2005.03.010 · doi-reference
CFD analysis of the characteristics of a proportional flow control valve with an innovative opening shape
10.1016/j.enconman.2016.06.025 · doi-reference
Flow field simulation and a flow model of servo-valve spool valve orifice
10.1016/j.enconman.2011.05.010 · doi-reference
Model-based nonlinear control of hydraulic servo systems: challenges, developments and perspectives
10.1007/s11465-018-0464-3 · doi-reference
Robust backstepping control via tracking differentiator for electro-hydraulic load simulator based on velocity synchronization
10.1016/j.conengprac.2025.106279 · doi-reference
A method for improving flow control valve performance based on active differential pressure regulation
10.1016/j.measurement.2023.113271 · doi-reference
Combining leakage and orifice flows in a hydraulic servovalve model
10.1115/1.1286335 · doi-reference
Deformation and leakage mechanisms at hydraulic clearance fit in deep-sea extreme environment
10.1063/5.0009913 · doi-reference
The influence of thermodynamic state of mineral hydraulic oil on flow rate through radial clearance at zero overlap inside the hydraulic components
10.2298/tsci16s5461k · doi-reference
Pressure characteristics analysis of the deflector jet pilot stage under dynamic skewed velocity distribution
10.3390/aerospace12070638 · doi-reference
Research on the three-dimensional turbulent jet mechanism and refined characteristic parameters of the deflector jet hydraulic amplifier
10.1063/5.0279044 · doi-reference
The flow field modeling and performance analysis method for the pilot stage of deflector jet servo valve
10.1016/j.flowmeasinst.2025.102851 · doi-reference
CFD analysis of flow forces and energy loss characteristics in a flapper–nozzle pilot valve with different null clearances
10.1016/j.enconman.2014.03.076 · doi-reference
Enhanced energy conservation and response accuracy of a pneumatic control system
10.1016/j.isci.2024.110797 · doi-reference