Entropy generation and its role on exergy destruction and efficient thermal management in renewable energy systems

Optimizing combustion efficiency and emission reduction in low temperature combustion engines using biodiesel-nano additive alcohol blends: A review

10.1016/j.rineng.2025.106175 · doi-reference

Design of complex heat exchanger geometries using AI and simulation

10.1016/j.icheatmasstransfer.2025.109197 · doi-reference

Heat transfer improvement in turbulent flow using detached obstacles in heat exchanger duct

10.1016/j.ijft.2025.101225 · doi-reference

Towards an efficient metal energy carrier for zero-emission heating and power: Iron powder combustion

10.1016/j.combustflame.2024.113655 · doi-reference

reactingFoam-SCI: An open source CFD platform for reacting flow simulation

10.1016/j.compfluid.2019.06.008 · doi-reference

Effect of NH3/H2/O2 premixed combustion on energy conversion enhancement and NOx emission reduction of the segmented nozzle micro-combustor in thermophotovoltaic system

10.1016/j.renene.2024.120682 · doi-reference

Thermal management in polymer sheet extrusion using physics informed neural networks and non-Fourier viscoelastic modeling

10.1016/j.icheatmasstransfer.2026.110850 · doi-reference

Condensation and turbulence modeling of crisscross mesh for fog harvesting toward sustainable water production

10.1016/j.icheatmasstransfer.2026.111067 · doi-reference

Experimental investigation of thermohydraulic performance, entropy minimization, and exergy efficiency in red mud nanofluid

10.1016/j.ijthermalsci.2024.109279 · doi-reference

Stability, thermophysical properties, forced convective heat transfer, entropy minimization and exergy performance of a novel hybrid nanofluid: experimental study

10.1016/j.molliq.2024.125571 · doi-reference

Chemical looping combustion: Status and development challenges

10.1021/acs.energyfuels.0c01454 · doi-reference

Heat extraction analysis for nonlinear heat flow in fractured geothermal reservoirs

10.1016/j.compgeo.2022.104641 · doi-reference

Experimental and computational determination of heat transfer, entropy generation and pressure drop under turbulent flow in a tube with fly ash-Cu hybrid nanofluid

10.1016/j.ijthermalsci.2021.107016 · doi-reference

Finite volume method for coupled subsurface flow problems, II: Poroelasticity

10.1016/j.jcp.2022.111225 · doi-reference

Openfoam for computational combustion dynamics

10.1140/epjs/s11734-022-00606-6 · doi-reference

Combustion model development of future DI engines for carbon emission reduction

10.1016/j.enconman.2024.118528 · doi-reference

Ammonia composite combustion with alcohol/ether: A systematic review from engine applications to combustion enhancement and emission mechanisms

10.1016/j.enconman.2024.119160 · doi-reference

Enhancing combustion efficiency and reducing nitrogen oxide emissions from ammonia combustion: A comprehensive review

10.1016/j.psep.2024.01.020 · doi-reference

Experimental determination of entropy and exergy in low cycle fatigue

10.1016/j.ijfatigue.2019.105333 · doi-reference

Entropy generation and friction factor analysis of fly ash nanofluids flowing in a horizontal tube: Experimental and numerical study

10.1016/j.ijthermalsci.2021.106972 · doi-reference

Exergy evaluation of equivalence ratio, compression ratio and residual gas effects in variable compression ratio spark-ignition engine using quasi-dimensional combustion modeling

10.1016/j.energy.2021.123080 · doi-reference

The evaluation of a methane autothermal chemical looping reforming experiment based on exergy analysis

10.1039/c9ra03315g · doi-reference

Exergetic analysis of a spark ignition engine fuelled with ethanol

10.1016/j.enconman.2019.04.035 · doi-reference

Entropy generation and exergy analysis of premixed fuel-air combustion in micro porous media burner

10.3390/e22101104 · doi-reference

Analysis of entropy generation and exergy loss during combustion

10.1016/s1540-7489(02)80111-0 · doi-reference

Fully decoupled pressure projection scheme for the numerical solution of diffuse interface model of two-phase flow

10.1016/j.cnsns.2022.106547 · doi-reference

Experimental and computational insights into optimizing polymer solar cell operational parameters

10.1016/j.cap.2025.10.003 · doi-reference

A dimensionless modeling framework for scaling flameless combustion furnaces: Integrating energy-exergy and flow-similarity analyses for predictive, low-emission, and scalable industrial design

10.1016/j.rineng.2025.107956 · doi-reference

Simulations of wind formation in idealised mountain-valley systems using OpenFOAM

10.3390/su15021387 · doi-reference

A concept for H2-Diesel engines: CFD-driven dual spray optimization with energy/exergy analysis for enhanced performance and sustainable combustion

10.1016/j.csite.2025.106325 · doi-reference

A perspective on the state of aerospace computational fluid dynamics technology

10.1146/annurev-fluid-120720-124800 · doi-reference