Abstract
No public abstract is available from the verified source records.
William Ferretto, Luca Molinaroli
Abstract
Authors
Institutions
Provenance
crossref
Confidence 100%
openalex
Confidence 95%
datacite
Confidence 0%
No local reference links have been materialized yet.
No local citing links have been materialized yet.
Friction factor correlation and pressure loss of single-phase flow inside herringbone microfin tubes
10.1016/j.ijrefrig.2007.02.009 · 2007
Unresolved referenced work
Kept as external metadata until matched
Design optimization and validation of high-performance heat exchangers using approximation assisted optimization and additive manufacturing
10.1080/23744731.2017.1333877 · 2017
Unresolved referenced work
2005
Multi-objective optimization of a residential air source heat pump with small-diameter tubes using genetic algorithms
10.1016/j.ijrefrig.2016.03.016 · 2016
Efficient multiobjective optimization employing Gaussian processes, spectral sampling and a genetic algorithm
10.1007/s10898-018-0609-2 · 2018
Unresolved referenced work
Kept as external metadata until matched
The next generation of refrigerants - historical review, considerations, and outlook
10.1016/j.ijrefrig.2008.01.013 · 2008
Heat transfer and pressure drop during condensation of refrigerants inside horizontal enhanced tubes
10.1016/s0140-7007(99)00032-8 · 2000
Condensation of pure and near-azeotropic refrigerants in microfin tubes: a new computational procedure
10.1016/j.ijrefrig.2008.08.004 · 2009
Experiments with micro-fin tube in single phase
10.1016/j.ijrefrig.2004.04.015 · 2004
Charge optimisation study of a reversible water-to-water propane heat pump
10.1016/j.ijrefrig.2007.12.011 · 2008
Compressor-simulation model with corrections for the level of suction gas superheat
1981
Optimization of finned-tube condensers using an intelligent system
10.1016/j.ijrefrig.2006.08.013 · 2007
An optimized design of finned-tube evaporators using the learnable evolution model
10.1080/10789669.2004.10391099 · 2004
Performance of a finned-tube evaporator optimized for different refrigerants and its effect on system efficiency
10.1016/j.ijrefrig.2005.02.003 · 2005
An experimental study of the airside performance of the superslit fin-and-tube heat exchangers
10.1016/s0017-9310(00)00082-x · 2000
Unresolved referenced work
Kept as external metadata until matched
Unresolved referenced work
Kept as external metadata until matched
Unresolved referenced work
Kept as external metadata until matched
Refrigerant charge optimisation for propane heat pump water heaters
10.1016/j.ijrefrig.2017.02.017 · 2017
Multi-objective optimization of plain fin-and-tube heat exchanger using evolutionary algorithm
10.2514/1.49976 · 2011
Calculation of Fin efficiency for wet and dry fins
10.1080/10789669.1996.10391331 · 1996
Variable-circuitry heat exchanger for performance improvement of R290 air source heat pump system
10.1016/j.energy.2025.134818 · 2025
Recent advances in refrigerant circuitry optimization of fin-and-tube heat exchangers for air source heat pump systems
10.1016/j.energy.2025.137443 · 2025
Formulations for the thermodynamic properties of dry air from 173.15 to 473.15 K, and of saturated moist air from 173.15 to 372.15 K, at pressures to 5 MPa
1983
Unresolved referenced work
Kept as external metadata until matched
Unresolved referenced work
1976
Tube-fin heat exchanger circuitry optimization using integer permutation based genetic algorithm
10.1016/j.ijrefrig.2019.04.006 · 2019
Optimization study of the circuitry for 5 mm small-diameter finned-tube heat exchanger in air-source heat pumps
10.1016/j.applthermaleng.2024.123359 · 2024
Design optimization of heat exchangers utilizing shape-optimized, non-round tubes for a residential air-conditioning system using r290
2024
Describing the uncertainties in experimental results
10.1016/0894-1777(88)90043-x · 1988
A phenomenological model for analyzing reciprocating compressors
10.1016/j.ijrefrig.2007.02.006 · 2007
New non-dimensional performance parameters for the characterization of refrigeration compressors
10.1016/j.ijrefrig.2013.07.007 · 2013
New models for heat transfer and pressure drop during flow boiling of R407C and R410A in a horizontal microfin tube
10.1016/j.ijthermalsci.2015.11.010 · 2016
Calculation of void volume fraction in the subcooled and quality boiling regions
10.1016/0017-9310(70)90114-6 · 1970
Fin and tube heat exchanger: constructal thermo-economic optimization
10.1016/j.ijheatmasstransfer.2021.121257 · 2021
An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation
10.1007/s40430-020-02762-z · 2021
Prediction of air coil performance under partially wet and totally wet cooling conditions using equivalent dry-bulb temperature method
10.1016/s0140-7007(02)00132-9 · 2003
Experimental investigation on the solubility of R290 in two mineral oils
10.1016/j.ijrefrig.2020.12.021 · 2021
Experimental performance evaluation and refrigerant charge optimization of a dehumidifier with 5 mm diameter finned tube evaporator
10.1016/j.applthermaleng.2025.127233 · doi-reference
A dual-mode evolutionary algorithm for designing optimized refrigerant circuitries for finned-tube heat exchangers
10.1080/10789669.2011.604699 · doi-reference
Experimental analysis on R290 solubility and R290/oil mixture viscosity in oil sump of the rotary compressor
10.1016/j.ijrefrig.2018.07.021 · doi-reference
Experimental analysis and simplified modelling of a hermetic scroll refrigeration compressor
10.1016/s1359-4311(01)00083-7 · doi-reference
Experimental investigation on the solubility of R290 in two mineral oils
10.1016/j.ijrefrig.2020.12.021 · doi-reference
Prediction of air coil performance under partially wet and totally wet cooling conditions using equivalent dry-bulb temperature method
10.1016/s0140-7007(02)00132-9 · doi-reference
An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation
10.1007/s40430-020-02762-z · doi-reference
Fin and tube heat exchanger: constructal thermo-economic optimization
10.1016/j.ijheatmasstransfer.2021.121257 · doi-reference
Calculation of void volume fraction in the subcooled and quality boiling regions
10.1016/0017-9310(70)90114-6 · doi-reference
New models for heat transfer and pressure drop during flow boiling of R407C and R410A in a horizontal microfin tube
10.1016/j.ijthermalsci.2015.11.010 · doi-reference
New non-dimensional performance parameters for the characterization of refrigeration compressors
10.1016/j.ijrefrig.2013.07.007 · doi-reference
A phenomenological model for analyzing reciprocating compressors
10.1016/j.ijrefrig.2007.02.006 · doi-reference
Describing the uncertainties in experimental results
10.1016/0894-1777(88)90043-x · doi-reference
Optimization study of the circuitry for 5 mm small-diameter finned-tube heat exchanger in air-source heat pumps
10.1016/j.applthermaleng.2024.123359 · doi-reference
Tube-fin heat exchanger circuitry optimization using integer permutation based genetic algorithm
10.1016/j.ijrefrig.2019.04.006 · doi-reference
Recent advances in refrigerant circuitry optimization of fin-and-tube heat exchangers for air source heat pump systems
10.1016/j.energy.2025.137443 · doi-reference
Variable-circuitry heat exchanger for performance improvement of R290 air source heat pump system
10.1016/j.energy.2025.134818 · doi-reference
Calculation of Fin efficiency for wet and dry fins
10.1080/10789669.1996.10391331 · doi-reference
Multi-objective optimization of plain fin-and-tube heat exchanger using evolutionary algorithm
10.2514/1.49976 · doi-reference
Refrigerant charge optimisation for propane heat pump water heaters
10.1016/j.ijrefrig.2017.02.017 · doi-reference
An experimental study of the airside performance of the superslit fin-and-tube heat exchangers
10.1016/s0017-9310(00)00082-x · doi-reference
Performance of a finned-tube evaporator optimized for different refrigerants and its effect on system efficiency
10.1016/j.ijrefrig.2005.02.003 · doi-reference
An optimized design of finned-tube evaporators using the learnable evolution model
10.1080/10789669.2004.10391099 · doi-reference
Optimization of finned-tube condensers using an intelligent system
10.1016/j.ijrefrig.2006.08.013 · doi-reference
Charge optimisation study of a reversible water-to-water propane heat pump
10.1016/j.ijrefrig.2007.12.011 · doi-reference
Experiments with micro-fin tube in single phase
10.1016/j.ijrefrig.2004.04.015 · doi-reference
Condensation of pure and near-azeotropic refrigerants in microfin tubes: a new computational procedure
10.1016/j.ijrefrig.2008.08.004 · doi-reference
Heat transfer and pressure drop during condensation of refrigerants inside horizontal enhanced tubes
10.1016/s0140-7007(99)00032-8 · doi-reference
The next generation of refrigerants - historical review, considerations, and outlook
10.1016/j.ijrefrig.2008.01.013 · doi-reference
Efficient multiobjective optimization employing Gaussian processes, spectral sampling and a genetic algorithm
10.1007/s10898-018-0609-2 · doi-reference
Multi-objective optimization of a residential air source heat pump with small-diameter tubes using genetic algorithms
10.1016/j.ijrefrig.2016.03.016 · doi-reference
Design optimization and validation of high-performance heat exchangers using approximation assisted optimization and additive manufacturing
10.1080/23744731.2017.1333877 · doi-reference
Friction factor correlation and pressure loss of single-phase flow inside herringbone microfin tubes
10.1016/j.ijrefrig.2007.02.009 · doi-reference