Abstract
No public abstract is available from the verified source records.
Xiyuan Zhang, Dasheng Wei, Zengye Ju, Yujie Su, Yongbo Yu, Shun Yang
Abstract
Authors
Institutions
No ROR-resolved institution is linked to this work yet.
Provenance
crossref
Confidence 100%
openalex
Confidence 95%
datacite
Confidence 0%
No local reference links have been materialized yet.
No local citing links have been materialized yet.
A review on deformation mechanisms of metastable β titanium alloys
10.1007/s10853-024-10063-2 · 2024
Grain size effect on the stress-induced α'' martensitic phase transformation in Ti-7Cr-1.5Sn alloy
10.1016/j.jallcom.2025.182481 · 2025
Gradient phase stability mediated by heterogeneous α-precipitation achieves yield strength-ductility synergy in TWIP β-Ti alloy
10.1016/j.jmrt.2025.07.064 · 2025
Strength enhancement of α + β dual phase Ti-4Fe alloys with rhenium addition at room and high temperatures
10.1016/j.matdes.2025.114278 · 2025
Experimental and numerical investigations on fretting fatigue in a bridge-flat component using a stress life prediction model
10.1111/ffe.14384 · 2024
Revealing the martensitic variant selection in metastable beta titanium alloy Ti–10V–2Fe–3Al under heterogeneous deformation
10.1016/j.msea.2023.145181 · 2023
β-transus controlled microstructural transition in diffusion-bonded Ti-10V-3Al-2Fe alloy
10.1016/j.jallcom.2026.186112 · 2026
In-situ observation of nucleation, growth and interaction of deformation-induced α″ martensite in metastable Ti–10V–2Fe–3Al
10.1016/j.msea.2020.140237 · 2021
Microstructural inheritance of α-phase associated with ω-phase in Ti–20Nb alloy
10.1016/j.matlet.2025.138809 · 2025
Fretting fatigue in dovetail assembly and bridge-flat model: Verification of a life prediction model based on stress gradient
10.1016/j.ijfatigue.2024.108500 · 2024
Mechanical surface treatments on Ti–10V–2Fe–3Al for improved fatigue resistance
10.1016/s0921-5093(97)00804-6 · 1998
Effect of rotationally accelerated shot peening on the microstructure and mechanical behavior of a metastable β titanium alloy
10.1016/j.jmst.2020.10.034 · 2021
Effect of compressive residual stress and surface morphology introduced by shot peening on the improvement of fretting fatigue life of TC4
10.1016/j.ijfatigue.2025.108835 · 2025
Characterization on surface mechanical properties of Ti–6Al–4V after shot peening
10.1016/j.jallcom.2016.01.119 · 2016
Fatigue behaviour of PBF additive manufactured TI6AL4V alloy after shot and laser peening
10.1016/j.ijfatigue.2021.106536 · 2022
Effect of the ultrasonic surface rolling process and plasma electrolytic oxidation on the hot salt corrosion fatigue behavior of TC11 alloy
10.1016/j.ijfatigue.2022.107443 · 2023
Unveiling the effect of ECAP on the passive film stability, surface chemistry and corrosion resistance of the β-type Ti-29Nb-13Ta-4Mo alloy
10.1016/j.apsusc.2025.163506 · 2025
Enhancing surface properties of Ti via pulsed laser ablation in H2O2: Formation of stable TiO2-B structure with improved corrosion and wear resistance
10.1016/j.jmrt.2024.12.225 · 2025
Effect of stress ratio on very high cycle fatigue properties of Ti-10V-2Fe-3Al alloy with duplex microstructure
10.1016/j.jmst.2017.11.036 · 2018
Effect of contact pressure on fretting fatigue behavior of Ti-1023
10.1016/j.wear.2014.12.033 · 2015
The effect of interfacial contact and damage gradient on fretting fatigue of Ti-6Al-4 V dovetail assembly using a multiaxial fatigue framework
10.1016/j.ijfatigue.2025.109058 · 2025
Prediction of fatigue limit in additively manufactured Ti-6Al-4V alloy at elevated temperature
10.1016/j.ijfatigue.2019.04.025 · 2019
Incorporating small fatigue crack growth in probabilistic life prediction: Effect of stress ratio in Ti–6Al–2Sn–4Zr–6Mo
10.1016/j.ijfatigue.2013.01.008 · 2013
Metrological performance quantification of a 3D-DIC system
10.1016/j.measurement.2025.117008 · 2025
Directional DIC method with automatic feature selection
10.1016/j.ymssp.2024.112080 · 2025
Determining crack initiation fracture toughness and crack initiation length using DIC and AE approach for HDPE materials
10.1016/j.matdes.2025.114391 · 2025
A direct crack sizing approach from DIC strain analyses under elasto-plastic and dynamic conditions
10.1016/j.tafmec.2025.104861 · 2025
DIC-based studies of the overloading effects on the fatigue crack propagation behavior of Ti-6Al-4V ELI alloy
10.1016/j.ijfatigue.2018.03.017 · 2018
situ TEM study of dislocation slip in a metastable β titanium alloy
10.1016/j.scriptamat.2011.11.036 · 2012
Predicting the available work from deformation-induced [alpha]'' martensite formation in metastable [beta] Ti alloys
10.1107/s1600576720007451 · 2020
Crystallography and asymmetry of tensile and compressive stress-induced martensitic transformation in metastable β titanium alloy Ti–7Mo–3Nb–3Cr–3Al
10.1016/j.jallcom.2019.151762 · 2019
From single phase to dual-phase TRIP-TWIP titanium alloys: Design approach and properties
10.1016/j.mtla.2020.100700 · 2020
Quasi-static tensile strength as an indicator of dynamic compression performance and adiabatic shear banding susceptibility in a metastable β-titanium alloy
10.1016/j.jallcom.2026.187695 · 2026
Exceptional strength–ductility–modulus combination in additively manufactured metastable β titanium alloy via synergistic tuning of strengthening mechanisms
10.1016/j.msea.2026.150057 · 2026
Mechanical behavior and microstructural evolution during cyclic tensile loading-unloading deformation in metastable Ti–10V–2Fe–3Al alloy
10.1016/j.msea.2022.142663 · 2022
Elucidating the role of stress-induced martensite on the tensile behaviour of metastable β Ti-10V-2Fe-3Al alloy
10.1016/j.matchar.2023.113507 · 2024
Effect of α phase fraction on the dynamic mechanical behavior of a dual-phase metastable β titanium alloy Ti–10V–2Fe–3Al
10.1016/j.msea.2021.141322 · 2021
Effect of primary α phase fraction on deformation mechanism of Ti-1023 alloy at room temperature
10.1016/j.msea.2024.147104 · 2024
Influence of Zr and Sn alloying on phase stability, microstructure, and mechanical behavior of Ti-12Mo-4Al metastable β titanium alloys: An atomic-scale study
10.1016/j.actamat.2026.122310 · 2026
Lowering of elastic modulus in the near-beta Ti–13Nb–13Zr alloy through heat treatment
10.1080/02670836.2020.1732608 · 2020
e. al, Accommodation Mechanisms in Strain-Transformable Titanium Alloys
10.1016/j.msea.2021.141437 · doi-reference
The Crystallography of Martensite Transformations—IV: Body-Centred Cubic to Orthorhombic Transformations
10.1016/0001-6160(57)90018-4 · doi-reference
Influence of β grain size on tensile behavior and ductile fracture toughness of titanium alloy Ti-10V-2Fe-3Al
10.1007/s11661-006-0087-x · doi-reference
Role of stress-induced martensite on damage behavior in a metastable titanium alloy
10.1016/j.ijplas.2021.103103 · doi-reference
Effect of β grain size on stress induced martensitic transformation in β solution treated Ti–10V–2Fe–3Al alloy
10.1016/j.scriptamat.2005.03.039 · doi-reference
A Review of Metastable Beta Titanium Alloys
10.3390/met8070506 · doi-reference
Transitions among martensitic phases during continuous deformation in metastable β Ti-10V-2Fe-3Al alloy
10.1016/j.jallcom.2023.171320 · doi-reference
Deformation mechanisms at the tip of internal fatigue cracks in vacuum and in the presence of an air environment in a Ti alloy
10.1016/j.ijfatigue.2024.108729 · doi-reference
Methods for evaluating fracture patterns of polycrystalline materials based on the parameter analysis of fatigue striations: A review
10.1016/j.mex.2024.102989 · doi-reference
10.1520/stp43764s
10.1520/stp43764s · doi-reference
10.1201/b13044
10.1201/b13044 · doi-reference
Metals Handbook Ninth Edition, Volume 1. Properties and Selection: Irons and Steels
10.1016/0378-3804(80)90008-x · doi-reference
Lowering of elastic modulus in the near-beta Ti–13Nb–13Zr alloy through heat treatment
10.1080/02670836.2020.1732608 · doi-reference
Influence of Zr and Sn alloying on phase stability, microstructure, and mechanical behavior of Ti-12Mo-4Al metastable β titanium alloys: An atomic-scale study
10.1016/j.actamat.2026.122310 · doi-reference
Effect of primary α phase fraction on deformation mechanism of Ti-1023 alloy at room temperature
10.1016/j.msea.2024.147104 · doi-reference
Effect of α phase fraction on the dynamic mechanical behavior of a dual-phase metastable β titanium alloy Ti–10V–2Fe–3Al
10.1016/j.msea.2021.141322 · doi-reference
Elucidating the role of stress-induced martensite on the tensile behaviour of metastable β Ti-10V-2Fe-3Al alloy
10.1016/j.matchar.2023.113507 · doi-reference
Mechanical behavior and microstructural evolution during cyclic tensile loading-unloading deformation in metastable Ti–10V–2Fe–3Al alloy
10.1016/j.msea.2022.142663 · doi-reference
Exceptional strength–ductility–modulus combination in additively manufactured metastable β titanium alloy via synergistic tuning of strengthening mechanisms
10.1016/j.msea.2026.150057 · doi-reference
Quasi-static tensile strength as an indicator of dynamic compression performance and adiabatic shear banding susceptibility in a metastable β-titanium alloy
10.1016/j.jallcom.2026.187695 · doi-reference
From single phase to dual-phase TRIP-TWIP titanium alloys: Design approach and properties
10.1016/j.mtla.2020.100700 · doi-reference
Crystallography and asymmetry of tensile and compressive stress-induced martensitic transformation in metastable β titanium alloy Ti–7Mo–3Nb–3Cr–3Al
10.1016/j.jallcom.2019.151762 · doi-reference
Predicting the Available Work from Deformation-Induced α″ Martensite Formation in Metastable β Ti Alloys
10.1107/s1600576720007451 · doi-reference
situ TEM study of dislocation slip in a metastable β titanium alloy
10.1016/j.scriptamat.2011.11.036 · doi-reference
DIC-based studies of the overloading effects on the fatigue crack propagation behavior of Ti-6Al-4V ELI alloy
10.1016/j.ijfatigue.2018.03.017 · doi-reference
A direct crack sizing approach from DIC strain analyses under elasto-plastic and dynamic conditions
10.1016/j.tafmec.2025.104861 · doi-reference
Determining crack initiation fracture toughness and crack initiation length using DIC and AE approach for HDPE materials
10.1016/j.matdes.2025.114391 · doi-reference
Directional DIC method with automatic feature selection
10.1016/j.ymssp.2024.112080 · doi-reference
Incorporating small fatigue crack growth in probabilistic life prediction: Effect of stress ratio in Ti–6Al–2Sn–4Zr–6Mo
10.1016/j.ijfatigue.2013.01.008 · doi-reference
Prediction of fatigue limit in additively manufactured Ti-6Al-4V alloy at elevated temperature
10.1016/j.ijfatigue.2019.04.025 · doi-reference
The effect of interfacial contact and damage gradient on fretting fatigue of Ti-6Al-4 V dovetail assembly using a multiaxial fatigue framework
10.1016/j.ijfatigue.2025.109058 · doi-reference
Effect of contact pressure on fretting fatigue behavior of Ti-1023
10.1016/j.wear.2014.12.033 · doi-reference
Effect of stress ratio on very high cycle fatigue properties of Ti-10V-2Fe-3Al alloy with duplex microstructure
10.1016/j.jmst.2017.11.036 · doi-reference
Enhancing surface properties of Ti via pulsed laser ablation in H2O2: Formation of stable TiO2-B structure with improved corrosion and wear resistance
10.1016/j.jmrt.2024.12.225 · doi-reference
Unveiling the effect of ECAP on the passive film stability, surface chemistry and corrosion resistance of the β-type Ti-29Nb-13Ta-4Mo alloy
10.1016/j.apsusc.2025.163506 · doi-reference
Effect of the ultrasonic surface rolling process and plasma electrolytic oxidation on the hot salt corrosion fatigue behavior of TC11 alloy
10.1016/j.ijfatigue.2022.107443 · doi-reference
Fatigue behaviour of PBF additive manufactured TI6AL4V alloy after shot and laser peening
10.1016/j.ijfatigue.2021.106536 · doi-reference
Characterization on surface mechanical properties of Ti–6Al–4V after shot peening
10.1016/j.jallcom.2016.01.119 · doi-reference
Effect of compressive residual stress and surface morphology introduced by shot peening on the improvement of fretting fatigue life of TC4
10.1016/j.ijfatigue.2025.108835 · doi-reference
Effect of rotationally accelerated shot peening on the microstructure and mechanical behavior of a metastable β titanium alloy
10.1016/j.jmst.2020.10.034 · doi-reference