Y content dependent evolution of segregation derived phases and tensile behavior in cast K4169 superalloy

First-principles study of mechanical and electronic properties of Lu2SnC under pressure

10.1063/1.5144577 · doi-reference

XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals

10.1080/14786440808520496 · doi-reference

Evaluation on static mechanical stability of wrought Inconel 718 superalloy; effect of grain configuration and δ precipitation

10.1016/j.jmrt.2023.03.123 · doi-reference

Formation and aggregation behavior of inclusions in Ni-based alloys with different Mg contents

10.1016/j.jmrt.2023.08.260 · doi-reference

Berechnung der fließgrenze von mischkristallen auf grund der plastizitätsbedingung für einkristalle

10.1002/zamm.19290090104 · doi-reference

The elastic behaviour of a crystalline aggregate

10.1088/0370-1298/65/5/307 · doi-reference

10.1007/978-3-663-15884-4

10.1007/978-3-663-15884-4 · doi-reference

Necessary and sufficient elastic stability conditions in various crystal systems

10.1103/physrevb.90.224104 · doi-reference

Commentary: The materials project: a materials genome approach to accelerating materials innovation

10.1063/1.4812323 · doi-reference

Restoring the density-gradient expansion for exchange in solids and surfaces

10.1103/physrevlett.100.136406 · doi-reference

Atoms, molecules, solids, and surfaces: Applications of the generalized gradient approximation for exchange and correlation

10.1103/physrevb.46.6671 · doi-reference

Effect of two-step solid solution on microstructure and δ phase precipitation of Inconel 718 alloy

10.1007/s12613-024-2887-7 · doi-reference

A new refractory Ni7Nb2 phase identified in Laves eutectic regions by TEM study

10.1016/j.actamat.2021.116985 · doi-reference

Laves phases: a review of their functional and structural applications and an improved fundamental understanding of stability and properties

10.1007/s10853-020-05509-2 · doi-reference

Influence of cooling strategy on microstructure, deformation mechanism and mechanical properties of a nickel-based superalloy

10.1016/j.matchar.2023.112994 · doi-reference

Low cycle fatigue behavior of micro-grain casting K4169 superalloy at room temperature

10.1016/j.pnsc.2022.10.009 · doi-reference

Grain size effect on precipitation behavior of nanostructured Inconel 718

10.1016/j.jmst.2024.03.022 · doi-reference

Precipitation Behavior and Mechanical Properties of a Ni-Based Alloy with Different Silicon Contents

10.1007/s11665-023-08553-6 · doi-reference

Solvent-enriched interface enables ductility in an ultrastrong alloy

10.1016/j.actamat.2025.121829 · doi-reference

Effect of Al and Ti addition on the characteristics of oxide inclusions in Ni-based superalloy

10.1051/metal/2023022 · doi-reference

Effect of a MgO–CaO–ZrO2-based refractory on the cleanliness of a K4169 Ni-based superalloy

10.1016/j.ceramint.2022.08.319 · doi-reference

Effect of C content on microstructure and hot deformation behavior of a Ni-based superalloy

10.1016/j.jallcom.2023.171453 · doi-reference

Study on superplastic behaviour of cold rolled Inconel 718 alloy with δ phase dispersion distribution

10.1080/10667857.2023.2221548 · doi-reference

Mechanical Properties Evolution of γ′/γ″ Nickel-Base Superalloys During Long-Term Thermal Over-Aging

10.1007/s11661-018-4778-x · doi-reference

Dynamics evolution of γ′ precipitates size and composition interface between γ/γ′ phases in Ni–Al alloy at different aging temperatures

10.1007/s12598-016-0700-0 · doi-reference

The influence of Σ3 grain boundary and δ phase competition mechanisms on size dependence and micro-deformation behavior of Inconel 718 foil

10.1016/j.msea.2024.146776 · doi-reference

Influence of δ Phase Microstructure Evolution on the Dynamic Nano-mechanical Properties of GH4169 Alloy

10.1007/s11665-024-09687-x · doi-reference

New Insights Into the Formation Mechanism of TiN–Al2O3 Composite Inclusions in Nickel-Based Superalloys Based on Density Functional Theory

10.1007/s11663-023-02890-6 · doi-reference

Theoretical predictions of structure and related properties of intermetallics

10.1179/mst.1992.8.4.345 · doi-reference

Effects of aluminum and titanium additions on the formation of nonmetallic inclusions in nickel-based superalloys

10.1016/j.jallcom.2022.164281 · doi-reference

Dislocation climbing dominated decomposition and fracture of carbides in a ni-based superalloy

10.1016/j.actamat.2023.118669 · doi-reference

The grain boundary brittleness at intermediate temperature in a precipitation strengthened Ni-based polycrystalline alloy

10.1016/j.actamat.2024.120681 · doi-reference

γ′ and γ″ co-precipitation phenomena in directly aged Alloy 718 with high δ-phase fractions

10.1016/j.matdes.2024.112961 · doi-reference

Investigation and Simulation of the Effects of nm-Scale γ′ Precipitates on the Recrystallization of Ni-based Superalloys

10.1007/s11661-023-07008-w · doi-reference

Temperature-dependent deformation mechanisms and strengthening behavior of a novel ni-based superalloy with bimodal γ′ precipitate distribution

10.1016/j.msea.2026.149784 · doi-reference

Formation mechanisms of coprecipitates in Inconel 718 Superalloys

10.1016/j.actamat.2023.118825 · doi-reference

Effects of yttrium on microstructure and mechanical properties of a directionally solidified single crystal superalloy

10.1016/j.msea.2019.02.089 · doi-reference

The role of yttrium micro-alloying on microstructure evolution and high-temperature mechanical properties of additively manufactured Inconel 718

10.1016/j.matdes.2022.111567 · doi-reference

Effect of yttrium addition on phase transformations in alloy 718

10.1016/j.jmrt.2022.03.137 · doi-reference

Effect of yttrium addition on creep behavior of wrought nickel alloy 718

10.1016/j.msea.2025.147887 · doi-reference