Evaluation of correlations for minimum fluidization velocity ( Umf) in gas-solid fluidization
10.1016/j.powtec.2017.10.016 · doi-reference
A generalized method for predicting the minimum fluidization velocity
10.1002/aic.690120343 · doi-reference
Recent advancements in ethylene and propylene production using the UOP/Hydro MTO process
10.1016/j.cattod.2005.07.178 · doi-reference
Reduction of efficiency penalty for a natural gas combined cycle power plant with post-combustion CO2 capture: Integration of liquid natural gas cold energy
10.1016/j.enconman.2019.111852 · doi-reference
An efficient temperature swing adsorption (TSA) process for separating CO2 from CO2/N2 mixture using Mg-MOF-74
10.1016/j.enconman.2017.11.010 · doi-reference
Optimal methanol production via sorption-enhanced reaction process
10.1021/acs.iecr.8b02543 · doi-reference
Energy-water-environment nexus underpinning future desalination sustainability
10.1016/j.desal.2017.03.009 · doi-reference
Optimal retrofit of a CO2 capture pilot plant using superstructure and rate-based models
10.1016/j.ijggc.2016.03.024 · doi-reference
Energy analysis of the cryogenic CO2 capture process based on Stirling coolers
10.1016/j.energy.2013.10.087 · doi-reference
Multi-objective optimization of breakthrough times for hydrogen purification through layered bed pressure swing adsorption based on genetic algorithm and artificial neural network model
10.1016/j.ijhydene.2023.08.357 · doi-reference
Multi-objective optimization of ANN-based PSA model for hydrogen purification from steam-methane reforming gas
10.1016/j.ijhydene.2021.01.107 · doi-reference
Multi-objective optimisation using surrogate models for the design of VPSA systems
10.1016/j.compchemeng.2015.07.009 · doi-reference
Modeling, simulation, and optimization of postcombustion CO2capture for variable feed concentration and flow rate. 2. Pressure swing adsorption and vacuum swing adsorption processes
10.1021/ie301572n · doi-reference
A comparison of three methods for selecting values of input variables in the analysis of output from a computer code
10.1080/00401706.2000.10485979 · doi-reference
Design and operation of CO2-H2 multi-component separation vacuum pressure swing adsorption process with tandem-column adsorber
10.1016/j.seppur.2025.134461 · doi-reference
Methanol–steam reforming on Cu/ZnO/Al2O3 catalysts. Part 2. A comprehensive kinetic model
10.1016/s0926-860x(98)00299-3 · doi-reference
Analysis of design variables for water-gas-shift reactors by model-based optimization
10.1016/j.jpowsour.2007.04.048 · doi-reference
Water gas shift reaction kinetics and reactor modeling for fuel cell grade hydrogen
10.1016/s0378-7753(03)00614-1 · doi-reference
Intra-particle diffusion limitations in low-pressure methanol synthesis
10.1016/0009-2509(90)85001-t · doi-reference
Chemical equilibria in methanol synthesis
10.1016/0009-2509(86)80019-7 · doi-reference
Multi-objective optimization for two catalytic membrane reactors—Methanol synthesis and hydrogen production
10.1016/j.ces.2007.12.005 · doi-reference
Novel process design and techno-economic simulation of methanol synthesis from blast furnace gas in an integrated steelworks CCUS system
10.1016/j.jcou.2022.102278 · doi-reference
Multi-objective optimization of integrated CO₂ capture via temperature vacuum swing adsorption (TVSA) and methanol production
10.1016/j.psep.2025.108248 · doi-reference
A generic superstructure modeling and optimization framework on the example of bi-criteria Power-to-Methanol process design
10.1016/j.compchemeng.2021.107327 · doi-reference
Integrated CO2 capture and conversion into methanol units: assessing techno-economic and environmental aspects compared to CO2 into SNG alternative
10.1016/j.jcou.2024.102879 · doi-reference
