Correlation of residual stress, hardness and surface roughness with crack initiation and fatigue strength of surface treated additive manufactured AlSi10Mg: experimental and machine learning approaches
10.1016/j.jmrt.2023.03.193 · doi-reference
Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting
10.1016/j.actamat.2019.06.013 · doi-reference
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
10.1016/j.actamat.2012.11.052 · doi-reference
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
10.1016/j.actamat.2013.09.042 · doi-reference
Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L
10.1016/j.actamat.2020.07.063 · doi-reference
Revealing relationships between microstructure and hardening nature of additively manufactured 316L stainless steel
10.1016/j.matdes.2020.109385 · doi-reference
Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel
10.1016/j.matdes.2018.12.006 · doi-reference
Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting
10.1016/j.jmatprotec.2018.08.049 · doi-reference
Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting
10.1016/j.actamat.2020.09.015 · doi-reference
Effect of scanning strategy on grain structure and crystallographic texture of Inconel 718 processed by selective laser melting
10.1016/j.jmst.2018.02.002 · doi-reference
Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
10.1038/s41427-018-0018-5 · doi-reference
Mechanical anisotropy of additively manufactured stainless steel 316L: an experimental and numerical study
10.1016/j.msea.2020.140154 · doi-reference
The role of sidebranching in microstructure development in laser powder-bed fusion
10.1038/s41467-020-14453-3 · doi-reference
Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts
10.1108/13552541111124770 · doi-reference
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
10.1108/13552540910943397 · doi-reference
Balling behavior of stainless steel and nickel powder during selective laser melting process
10.1007/s00170-011-3566-1 · doi-reference
Effects of build orientation and heat treatments on the tensile and fracture toughness properties of additively manufactured AlSi10Mg
10.1016/j.ijmecsci.2021.106868 · doi-reference
Relationship between microstructure evolution and tensile properties of AlSi10Mg alloys with varying Mg content and solidification cooling rates
10.3390/met11071019 · doi-reference
Influence of working environment and built orientation on the tensile properties of selective laser melted AlSi10Mg alloy
10.1016/j.msea.2019.01.103 · doi-reference
Effect of laser parameters on microstructure, metallurgical defects and property of AlSi10Mg printed by selective laser melting
10.1142/s2424913017500175 · doi-reference
Selective laser melted AlSi10Mg alloy under melting mode transition: microstructure evolution, nanomechanical behaviors and tensile properties
10.1016/j.jallcom.2021.159823 · doi-reference
Effect of direct aging on the microstructure and tensile properties of AlSi10Mg alloy manufactured by selective laser melting process
10.1016/j.matchar.2021.111113 · doi-reference
Laser powder bed fusion of AlSi10Mg: influence of energy intensities on spatter and porosity evolution, microstructure and mechanical properties
10.1016/j.jallcom.2020.156300 · doi-reference
Microstructure and tensile properties of AlSi10Mg alloy manufactured by multi-laser beam selective laser melting (SLM)
10.3390/met9121337 · doi-reference
The AlSi10Mg samples produced by selective laser melting: single track, densification, microstructure and mechanical behavior
10.1016/j.apsusc.2017.02.215 · doi-reference
Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism
10.1016/j.msea.2016.03.088 · doi-reference
Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg
10.1016/j.msea.2018.10.055 · doi-reference
TiC addition enhances thermal stability and mitigates intermediate-temperature embrittlement in al–ce–ni additively manufactured via laser powder bed fusion
10.1016/j.actamat.2026.122492 · doi-reference
Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding
10.1016/j.ijmachtools.2020.103555 · doi-reference
