Abstract
No public abstract is available from the verified source records.
Peikang Xia, Jiwei Geng, Yugang Li, Fangming Wang, Zhiping Wang, Xianfeng Li, Haowei Wang
Abstract
Authors
Institutions
No local reference links have been materialized yet.
No local citing links have been materialized yet.
Failure analysis of drill pipe: a review
10.1016/j.engfailanal.2015.10.012 · 2016
Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling
10.1016/j.pnsc.2019.02.001 · 2019
Material optimization of drill pipe in complex wellbore environments by comparing fatigue life and cost
10.1016/j.egyr.2021.08.135 · 2021
Effect of various aging treatment on thermal stability of a novel Al-Zn-Mg-Cu alloy for oil drilling
10.1016/j.msea.2020.140490 · 2021
Characteristics and life expression of fatigue fracture of G105 and S135 drill pipe steels for API grade
10.1016/j.engfailanal.2020.104705 · 2020
Microstructure and mechanical properties of multi-pass forged and annealed 42CrMo steel
10.1016/j.msea.2021.142191 · 2022
Directed energy deposition repair of dissimilar ultra-high strength steels: martensite variant selection and dynamic deformation mechanism
10.1016/j.msea.2025.148336 · 2025
Changing the game from steel to aluminum drill pipe: results from full string aluminum alloy drill pipe deployment to enhance extended reach drilling performance
2015
Strength and ductility improvement of an in-situ TiB2/Al–Zn–Mg–Cu composite by elliptical cross-section torsion extrusion
Provenance
crossref
Confidence 100%
openalex
Confidence 95%
datacite
Confidence 0%
10.1016/j.compositesb.2021.108843 · 2021
Sub-micron particles induced microstructure modification to achieve exceptional mechanical and corrosion properties combination in additive manufactured TiB2/Al–Zn–Mg–Cu composites
10.1007/s42114-025-01398-8 · 2025
Aluminum alloy tubulars for oil and gas industry
2005
A heat treatable TiB2/Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: microstructure, heat treatment and mechanical properties
10.1016/j.compositesb.2018.04.026 · 2018
Segregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloy
10.1016/j.actamat.2018.07.003 · 2018
Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties
10.1016/j.compositesb.2021.108605 · 2021
Mechanical properties and corrosion resistance enhancement of 2024 aluminum alloy for drill pipe after heat treatment and Sr modification
2023
Microstructure and mechanical properties of high strength Al-Zn-Mg-Cu alloys used for oil drill pipes
10.1016/s1003-6326(15)63994-2 · 2015
Investigation on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys with various Zn/Mg ratios
10.1016/j.jmst.2020.12.045 · 2021
A novel GP-Li precursor and the correlated precipitation behaviors in Al-Cu-Li alloys with different Cu/Li ratio
10.1016/j.actamat.2022.118442 · 2023
Thermomechanical pretreatment of Al-Zn-Mg-Cu alloy to improve formability and performance during creep-age forming
10.1016/j.jmatprotec.2021.117089 · 2021
Experiment and multiscale modeling of the coupled influence of constituents and precipitates on the ductile fracture of heat-treatable aluminum alloys
10.1016/j.actamat.2005.04.002 · 2005
Phase transformation from η phase to S phase at grain boundary during annealing in rapidly-solidified Al-Zn-Mg-Cu alloy
10.1016/j.matchar.2022.112531 · 2023
Structural, mechanical and thermal characteristics of Al-Cu-Li particle reinforced Al-matrix composites synthesized by microwave sintering and hot extrusion
10.1016/j.compositesb.2019.01.063 · 2019
Achieving simultaneous enhancement of strength and ductility in Al matrix composites by employing the synergetic strengthening effect of micro- and nano-SiCps
10.1016/j.compositesb.2022.110350 · 2023
Reversion and re-aging of a peak aged Al-Zn-Mg-Cu alloy
10.1016/j.scriptamat.2020.07.049 · 2020
Microstructure evolution and precipitation strengthening behaviors of non-isothermal aged SiC/7xxxAl composite
10.1016/j.jmst.2024.11.043 · 2025
Texture evolution, segregation behavior, and mechanical properties of 2060 Al-Li (aluminium-lithium) composites reinforced by TiC (titanium carbide) nanoparticles
10.1016/j.compositesb.2023.110611 · 2023
Improved strength and ductility on laser beam welded joints of 7085Al matrix nanocomposites by in-situ ZrB2 nanoparticles and Al3(Er, Zr) nanoprecipitates
10.1016/j.compositesb.2023.110990 · 2023
Texture of aluminum alloy pipe With internal ends
10.1007/bf00667529 · 1987
Effect of extrusion texture on corrosion behaviour of D16T Drill Pipe in 3.5% NaCl solution
10.20964/2018.09.65 · 2018
Failure analysis on aluminum alloy drill pipe with pits and parallel transverse cracks
10.1016/j.engfailanal.2021.105809 · 2022
Plastic strain in metals
1938
Study of microstructure and mechanical property heterogeneity throughout the wall thickness of high strength aluminum alloy thick-wall pipe
10.1557/jmr.2019.127 · 2019
Multi-feature evaluation method for grain size of large rings using phased array ultrasonic multi-depth focusing inspection
10.1016/j.measurement.2024.116629 · 2025
Through thickness variations of deformation texture in round profile extrusions of 6063-type aluminium alloy: experiments, FEM and crystal plasticity modelling
10.1016/j.msea.2018.02.081 · 2018
Effect of grain boundary and reinforced particles on grain boundary precipitates in TiB2/Al-Zn-Mg-Cu composite
10.1016/j.matchar.2023.112703 · 2023
A yield strength model for particle reinforced precipitate-hardened aluminum matrix composites
10.1007/s11661-025-07717-4 · 2025
Effect of TiB2 addition on the elevated temperature tribological behavior of spark plasma sintered Ti matrix composite
10.1016/j.compositesb.2019.05.073 · 2019
Microstructure analysis covers the effect of particle addition on dislocation recovery and tensile ductility for TiB2/Al-Zn-Mg-Cu composites
10.1016/j.matchar.2025.115809 · 2026
Effect of ceramic particles on thermal stability in aluminum matrix composite: viewing from thermal activation energy
10.1111/jace.70692 · 2026
Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles
10.1038/nature16445 · 2015
Kocks-Mecking analysis of the size effects on the mechanical behavior of nickel polycrystals
10.1016/j.ijplas.2017.07.003 · doi-reference
Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect
10.1016/j.msea.2011.10.043 · doi-reference
What governs ductility of ultrafine-grained metals? A microstructure based approach to necking instability
10.1016/j.actamat.2017.08.069 · doi-reference
Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy
10.1016/j.actamat.2011.02.035 · doi-reference
The effect of shear-resistant, plate-shaped precipitates on the work hardening of Al alloys: towards a prediction of the strength–elongation correlation
10.1016/j.actamat.2009.08.034 · doi-reference
The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver
10.1080/14786436008238300 · doi-reference
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
10.1080/09506608.2016.1191808 · doi-reference
Observation of giant diffusivity along dislocation cores
10.1126/science.1151771 · doi-reference
Influence of predeformation and ageing of an Al–Zn–Mg alloy—II. Modeling of precipitation kinetics and yield stress
10.1016/s1359-6454(98)00296-1 · doi-reference
Vacancy and solute co-segregated η1 interface in over-aged Al-Zn-Mg alloys
10.1016/j.actamat.2021.117082 · doi-reference
CALPHAD-informed phase-field modeling of grain boundary microchemistry and precipitation in al-zn-mg-cu alloys
10.1016/j.actamat.2021.116966 · doi-reference
Multiscale analysis of grain boundary microstructure in high strength 7xxx Al alloys
10.1016/j.actamat.2020.10.021 · doi-reference
Influence of predeformation on aging in Al-Zn-Mg-Cu alloy——I. Microstructure evolution and mechanical properties
10.1016/s1359-6454(98)00293-6 · doi-reference
Relation between precipitate-free zone width and grain boundary type in 7075-T7 Al alloy
10.1016/j.actamat.2006.10.015 · doi-reference
An atomic scale structural investigation of nanometre-sized η precipitates in the 7050 aluminium alloy
10.1016/j.actamat.2019.05.041 · doi-reference
Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy
10.1016/j.actamat.2018.02.045 · doi-reference
Early-stage precipitation in Al–Zn–Mg–Cu alloy (7050)
10.1016/j.actamat.2004.06.025 · doi-reference
GP-zones in Al–Zn–Mg alloys and their role in artificial aging,
10.1016/s1359-6454(01)00251-8 · doi-reference
Texture evolution and anisotropy elimination in hybrid reinforced matrix composites sheet via cross-directionally rolling
10.1016/j.compositesa.2025.109130 · doi-reference
Evolution of grain structure, micro-texture and second phase during porthole die extrusion of Al–Zn–Mg alloy
10.1016/j.matchar.2019.109953 · doi-reference
Thermomechanically coupled modeling and simulation of aluminum alloys during hot forming processes
10.1002/pamm.200910161 · doi-reference
Thermomechanical modeling and simulation of aluminum alloy behavior during extrusion and cooling
10.1016/j.jmatprotec.2008.02.076 · doi-reference
Thermomechanical modeling and simulation of aluminum alloys during extrusion process
10.1002/pamm.200810517 · doi-reference
Effect of pressure and temperature variations on FEM prediction of deformation during extrusion
10.1179/174328405x29221 · doi-reference
Influence of surface integrity on the fatigue performance of TiB2/Al composite treated by ultrasonic deep rolling: experiments and simulations
10.1016/j.compositesb.2023.111160 · doi-reference
Modeling the effect of Al3Sc precipitates on the yield stress and work hardening of an Al–Mg–Sc alloy
10.1016/j.actamat.2007.12.039 · doi-reference
New insight into precipitation of Al3Zr and correlative effect on recrystallization behavior in a rapidly-solidified Al-Zn-Mg-Cu-Zr alloy
10.1016/j.matchar.2022.112142 · doi-reference
Hydrogen trapping and embrittlement in high-strength Al alloys
10.1038/s41586-021-04343-z · doi-reference
Parameter free quantitative analysis of atom probe data by correlation functions: application to the precipitation in Al-Zn-Mg-Cu
10.1016/j.scriptamat.2018.05.024 · doi-reference
In-situ EBSD observation of texture evolution and lattice rotation behavior in shear deformation of thin-walled aluminum alloy tubes
10.1016/j.jmrt.2024.01.150 · doi-reference
Relationship of particle stimulated nucleation, recrystallization and mechanical properties responding to Fe and Si contents in hot-extruded 7055 aluminum alloys
10.1016/j.jmst.2019.07.014 · doi-reference
Achieving simultaneously improved tensile strength and ductility of a nano-TiB2/AlSi10Mg composite produced by cold spray additive manufacturing
10.1016/j.compositesb.2020.108404 · doi-reference
Effects of hot extrusion texture on anisotropy in microstructure and mechanical properties of spray formed Al–Zn–Mg–Cu 7055 aluminum alloy
10.1016/j.jmrt.2024.05.093 · doi-reference
Effect of pretreatment on microstructural stability and mechanical property in a spray formed Al-Zn-Mg-Cu alloy
10.1016/j.matdes.2021.109618 · doi-reference
Suppress defect-induced plastic instability to achieve superior strength-ductility combination of spray formed 7050 Al alloy
10.1016/j.matdes.2024.113421 · doi-reference
Synergistic reinforcement effect of Fe and in-situ synthesized MgAlB4 whiskers in Al matrix composites
10.1016/j.compositesb.2022.110267 · doi-reference
Review on superior strength and enhanced ductility of metallic nanomaterials
10.1016/j.pmatsci.2018.02.002 · doi-reference
Physics and phenomenology of strain hardening: the FCC case
10.1016/s0079-6425(02)00003-8 · doi-reference
Achieving high performance by optimized heat treatment in a spray formed Al–Zn–Mg–Cu alloy
10.1016/j.msea.2024.146134 · doi-reference
Coupling of dislocations and precipitates: impact on the mechanical behavior of ultrafine grained Al–Zn–Mg alloys
10.1016/j.actamat.2015.09.017 · doi-reference