Abstract
No public abstract is available from the verified source records.
Yi-Cheng Gao, Zhongyi Cai, Hong-Yu Yang, Bai–Xin Dong, Shi–Li Shu, Liang-Yu Chen, Cheng-Gang Wang, Pei-Jun Cong, Zhang Hong-jun, Qi‐Chuan Jiang
Abstract
Authors
No local reference links have been materialized yet.
No local citing links have been materialized yet.
Research progress, application and development of high performance 6000 series aluminum alloys for new energy vehicles
10.1016/j.jmrt.2024.08.018 · 2024
Making sustainable aluminum by recycling scrap: the science of “dirty” alloys
10.1016/j.pmatsci.2022.100947 · 2022
Microstructures and strengthening mechanisms of high Fe containing Al–Mg–Si–Mn–Fe alloys with Mg, Si and Mn modified
10.1016/j.msea.2020.140477 · 2021
Synergistic effects of Mn and B on iron-rich intermetallic modification of recycled Al alloy
10.1016/j.jmrt.2023.03.045 · 2023
Effect of Mg/Si ratio on the bendability and anisotropic Bend behavior of extruded 6000-Series Al alloy
10.3390/ma16093599 · 2023
Effects of oxide fragments on microstructure and mechanical properties of AA6061 aluminum alloy tube fabricated by thermomechanical consolidation of machining chips
10.3390/ma16041384 · 2023
Role of Fe-bearing intermetallic and grain boundary characteristic on the IGC behavior of Al-Mg-Si-Mn-Cr alloy FSWed joint
10.1016/j.jallcom.2025.178555 · 2025
Dynamic compression behavior of single-phase and dual-phase Fe-rich medium-entropy alloys
10.1016/j.intermet.2025.108871 · 2025
Heterogeneous nucleation and phase transformation of Fe-rich intermetallic compounds in Al–Mg–Si alloys
Institutions
Provenance
crossref
Confidence 100%
ror
Confidence 99%
ror
Confidence 99%
ror
Confidence 99%
openalex
Confidence 95%
datacite
Confidence 0%
10.1016/j.jallcom.2020.155515 · 2020
Effects of Fe content on the 3D morphology of Fe-rich phases and mechanical properties of cast Al-Mg-Si alloy
10.1016/j.jallcom.2024.174501 · 2024
Simultaneously enhanced strength, ductility and formability of Al-Mg-Si-Cu-Zn-Fe-Mn alloy sheets by coupling distribution of solute, phases and grains
10.1016/j.matchar.2024.113720 · 2024
A novel Fe-containing intermetallic agglomeration-separation process design for highly efficient reduction of Fe impurity elements and sustainable upgrade-recycling of Al-Si alloy scrap
2025
Effect of local loading on microstructure and enhanced mechanical property of large complex castings prepared by Al–Si–Fe–Mn–Mg–Cu alloy during squeeze casting
10.1016/j.jmst.2023.12.082 · 2024
In-situ EBSD study on the microstructure evolution of an Al–Mg–Si–Fe alloy with different precipitation free zones during tension at cryogenic and ambient temperatures
10.1016/j.msea.2023.145029 · 2023
Microstructure and properties of 6061 aluminum alloy by additive friction stir deposition
2025
Effect of overaging on the cyclic deformation behavior of an AA6061 aluminum alloy
2018
Effect of cooling rates and Fe contents on microstructure evolution of Al-Cu-Mn-Mg-Fe-Si alloys
10.1016/j.matchar.2024.114074 · 2024
Effects of processing paths on microstructure evolution and properties of high-strength and high-conductivity Al-Mg-Si alloys
10.1016/j.msea.2025.148606 · 2025
Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al–Zn–Mg–Cu matrix composite
10.1016/j.actamat.2019.11.068 · 2020
Towards the work hardening and strain delocalization achieved via in-situ intragranular reinforcement in Al-CuO composite
10.1016/j.actamat.2023.119110 · 2023
Ultrastrong and ductile Al–Mg alloy matrix composites via composition-modulated precipitation induced by intragranular ceramic nanoparticles
10.1016/j.compositesb.2024.112012 · 2025
Deciphering the solidification mechanisms of multi-scaled TiCN particles tailoring the abnormal grain coarsening during fast cooling
10.1016/j.compositesb.2025.112546 · 2025
Study on nano-treating of Al-Mg-Si-Cu alloys with TiC nanoparticles
10.1016/j.jallcom.2023.169405 · 2023
Nanoparticle-bands enabled strength-ductility synergy in wrought Al-Cu alloys
10.1016/j.matdes.2025.113675 · 2025
Wire-arc additive manufacturing of high-strength Al-Cu alloy via synergistic strengthening of Cd microalloying and TiC nanoparticle
10.1016/j.msea.2025.148572 · 2025
In-situ tailoring microstructure by directly synthesized TiC–TiB2 nanoparticles to achieve well-balanced strength and ductility in Al–Cu alloy
10.1016/j.msea.2023.145350 · 2023
Efficient grain refinement of Al alloys induced by in-situ nanoparticles
10.1016/j.jmst.2021.12.077 · 2022
Synergistic enhancement of strength and bendability of Al-Mg-Si-Cu alloys for safety components by adding Mn
10.1016/j.matdes.2024.113531 · 2025
Effects of cooling rate and cryogenic temperature on the mechanical properties and deformation characteristics of an Al-Mg-Si-Fe-Cr alloy
10.1016/j.jallcom.2023.169559 · 2023
Balancing strength and electrical conductivity in recycled Al-Mg-Si alloys: beneficial effect of combining continuous rheo-extrusion processing with Al-5Ti-1B refiner
10.1016/j.matdes.2025.114169 · 2025
Simultaneously improved strength, ductility and conductivity in a Be-added Al-Mg-Si alloy conductor under various heat treatments
10.1016/j.matlet.2025.138575 · 2025
Effect of quenching protocols on microstructure and corrosion morphology in a recycled Al–Mg–Si alloy: Tracing Cu impurities
10.1016/j.jmrt.2024.10.099 · 2024
Counting the coupled strengthening of α-Al(Fe,Mn)Si dispersoids and β″ precipitates in an Al-Mg-Si-Mn-Fe alloy: optimizing the solid-solution temperature
10.1016/j.msea.2025.148051 · 2025
Enhancing mechanical properties of twin-roll cast Al–Mg–Si–Fe alloys by regulating Fe-bearing phases and macro-segregation
10.1016/j.msea.2021.142256 · 2022
Effect mechanism of Er content variations on the mechanical and corrosion properties of T6 state Al–Mg–Si-xEr sheets
10.1016/j.jmrt.2024.01.216 · 2024
Microstructure, mechanical properties and fatigue behaviour of a new high-strength aluminium alloy AA 6086
10.1016/j.jallcom.2023.168976 · 2023
Role of trace nanoparticles in establishing fully optimized microstructure configuration of cold-rolled Al alloy
10.1016/j.matdes.2021.109743 · 2021
Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution
10.1016/j.compositesb.2021.108912 · 2021
Unprecedented enhancement in strength-plasticity synergy of (TiC+Al6MoTi+Mo)/Al cermet by multiple length-scale microstructure stimulated synergistic deformation
10.1016/j.compositesb.2021.109265 · 2021
Novel method to achieve synergetic strength–ductility improvement of Al–Cu alloy by in situ TiC–TiB2 particles via direct reaction synthesis
10.1016/j.msea.2023.144810 · 2023
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
10.1016/j.actamat.2013.09.042 · doi-reference
Influence of predeformation and agEing of an Al–Zn–Mg alloy—II. Modeling of precipitation kinetics and yield stress
10.1016/s1359-6454(98)00296-1 · doi-reference
A novel Al–Mg–Mn–Zr–Ti alloy with an excellent strength-ductility combination prepared via selective laser melting
10.1007/s42243-025-01648-5 · doi-reference
The enhanced superplasticity of a 2024 matrix nanocomposite reinforced by TiC particles
10.1016/j.msea.2020.138926 · doi-reference
Investigation on corrosion behaviors and mechanical properties of TiB2/7075Al composites with various particle contents
10.1016/j.jmrt.2023.01.222 · doi-reference
Relationship of particle stimulated nucleation, recrystallization and mechanical properties responding to Fe and Si contents in hot-extruded 7055 aluminum alloys
10.1016/j.jmst.2019.07.014 · doi-reference
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
10.1016/j.pmatsci.2013.09.002 · doi-reference
Effect of nano-TiC/TiB2 particles on the recrystallization and precipitation behavior of AA2055-TiC+TiB2 alloys
10.1016/j.msea.2023.144927 · doi-reference
Role of particles and lattice rotation in tension–compression asymmetry of aluminium alloys
10.1016/j.ijplas.2022.103464 · doi-reference
Exploring the potential of FSW-ed Al–Zn–Mg–Cu-based composite reinforced by trace in-situ nanoparticles in manufacturing workpiece with customizable size and high mechanical performances
10.1016/j.compositesb.2022.110425 · doi-reference
Microstructural evolution of nanodiamond-reinforced aluminum matrix composites during the process of hot extrusion
10.1016/j.ceramint.2022.11.103 · doi-reference
Development of nanoparticle-reinforced highly alloyed Al–Zn–Mg–Cu alloy with ultrahigh strength
10.1016/j.msea.2026.151042 · doi-reference
X-ray line broadening from filed aluminium and wolfram
10.1016/0001-6160(53)90006-6 · doi-reference
Tailoring bimodal grain structure of Mg-9Al-1Zn alloy for strength-ductility synergy: Co-regulating effect from coarse Al2Y and submicron Mg17Al12 particles
10.1016/j.jma.2021.01.008 · doi-reference
Effects of Mg17Al12 second phase particles on twinning-induced recrystallization behavior in Mg‒Al‒Zn alloys during gradient hot rolling
10.1016/j.jmst.2019.05.017 · doi-reference
A cellular operator model for the simulation of static recrystallization
10.1016/j.actamat.2006.08.045 · doi-reference
On the formation of recrystallization textures in binary Al-1.3% Mn investigated by means of local texture analysis
10.1016/1359-6454(95)00416-5 · doi-reference
Multi-scale study of microstructure evolution in hot extruded nano-sized TiB2 particle reinforced aluminum composites
10.1016/j.matdes.2016.12.070 · doi-reference
Effect of hot compression on the microstructure evolution of aluminium bronze alloy
10.1016/j.jmrt.2022.06.122 · doi-reference
Nanoparticle-enabled superplasticity in extruded AZ91 magnesium alloy with elongation exceeding 600
10.1088/2631-7990/ae7eb1 · doi-reference
Review on role of intermetallic and ceramic particles in recrystallization driving force and microstructure of wrought Al alloys
10.1016/j.jmrt.2023.10.098 · doi-reference
Strengthening die-cast Al-Mg and Al-Mg-Mn alloys with Fe as a beneficial element
10.1016/j.msea.2018.07.005 · doi-reference
Characterization of casting pores in Fe-rich al-si-cu alloys by microtomography and finite element analysis
10.1016/j.prostr.2016.06.330 · doi-reference
Synergistic optimization in solidification microstructure and mechanical performance of novel (TiCxNy − TiB2)p/Al nanocomposites: design, tuning and mechanism
10.1016/j.compositesa.2022.106843 · doi-reference
The contribution of constitutional supercooling to nucleation and grain formation
10.1007/s11661-015-2960-y · doi-reference
A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles
10.1016/j.mtla.2019.100458 · doi-reference
Nanoparticle-inhibited growth of primary aluminum in Al–10Si alloys
10.1016/j.actamat.2015.10.005 · doi-reference
Preparation and characterization of in situ (TiC-TiB2)/Al-Cu-Mg-Si composites with high strength and wear resistance
10.3390/ma15248750 · doi-reference
Versatility of trace nano-TiC–TiB2 in collaborative control of solidification-rolling-welding microstructural evolution in Al–Mg–Si alloy for enhanced properties
10.1016/j.msea.2022.143661 · doi-reference
Novel method to achieve synergetic strength–ductility improvement of Al–Cu alloy by in situ TiC–TiB2 particles via direct reaction synthesis
10.1016/j.msea.2023.144810 · doi-reference
Unprecedented enhancement in strength-plasticity synergy of (TiC+Al6MoTi+Mo)/Al cermet by multiple length-scale microstructure stimulated synergistic deformation
10.1016/j.compositesb.2021.109265 · doi-reference
Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution
10.1016/j.compositesb.2021.108912 · doi-reference
Role of trace nanoparticles in establishing fully optimized microstructure configuration of cold-rolled Al alloy
10.1016/j.matdes.2021.109743 · doi-reference
Microstructure, mechanical properties and fatigue behaviour of a new high-strength aluminium alloy AA 6086
10.1016/j.jallcom.2023.168976 · doi-reference
Effect mechanism of Er content variations on the mechanical and corrosion properties of T6 state Al–Mg–Si-xEr sheets
10.1016/j.jmrt.2024.01.216 · doi-reference
Enhancing mechanical properties of twin-roll cast Al–Mg–Si–Fe alloys by regulating Fe-bearing phases and macro-segregation
10.1016/j.msea.2021.142256 · doi-reference
Counting the coupled strengthening of α-Al(Fe,Mn)Si dispersoids and β″ precipitates in an Al-Mg-Si-Mn-Fe alloy: optimizing the solid-solution temperature
10.1016/j.msea.2025.148051 · doi-reference
Effect of quenching protocols on microstructure and corrosion morphology in a recycled Al–Mg–Si alloy: Tracing Cu impurities
10.1016/j.jmrt.2024.10.099 · doi-reference
Simultaneously improved strength, ductility and conductivity in a Be-added Al-Mg-Si alloy conductor under various heat treatments
10.1016/j.matlet.2025.138575 · doi-reference
Balancing strength and electrical conductivity in recycled Al-Mg-Si alloys: beneficial effect of combining continuous rheo-extrusion processing with Al-5Ti-1B refiner
10.1016/j.matdes.2025.114169 · doi-reference