Abstract
Yinuo Liu, Zijian Yu, Zexiong Li, Hongxing Liang, Wenbo Du
Abstract
Authors
Institutions
No ROR-resolved institution is linked to this work yet.
Provenance
crossref
Confidence 100%
unpaywall
Confidence 95%
doaj
Confidence 92%
datacite
Confidence 0%
No local reference links have been materialized yet.
No local citing links have been materialized yet.
Weight Loss with Magnesium Alloys
10.1126/science.1182848 · 2010
Development and application of magnesium alloy parts for automotive OEMs: A review
10.1016/j.jma.2022.12.015 · 2023
Applications of magnesium alloys for aerospace: A review
10.1016/j.jma.2023.09.015 · 2023
Magnesium research and applications: Past, present and future
10.1016/j.jma.2023.11.007 · 2023
Unresolved referenced work
2017
Improving room-temperature stretch formability of a high-alloyed Mg–Al–Ca–Mn alloy sheet by a high-temperature solution-treatment
10.1016/j.msea.2020.140399 · 2021
Dynamic microstructure evolution and mechanical properties of dilute Mg-Al-Ca-Mn alloy during hot rolling
10.1016/j.jmst.2022.03.029 · 2022
Influence of pre-stretching and annealing on microstructure and mechanical properties evolution of twin-roll cast Mg-2Al-1Zn-1Ca (wt.%) plates
10.1016/j.jmst.2024.04.058 · 2025
Unexpectedly formed strong basal texture in a rolled Mg-Zn-Ca-Mn alloy sheet
10.1016/j.matchar.2023.113101 · 2023
Achieving high strength-ductility synergy via Guinier-Preston zone formation in a new Mg–Zn–Al–Ca–Mn–Ce sheet alloy
10.1016/j.msea.2024.146586 · 2024
Regulating the grain refinement and rolling properties of coarse-crystalline Mg-Zn-Gd-Ca-Mn alloy through multi-pass cold rolling and annealing
10.1016/j.msea.2024.146940 · 2024
Microstructure evolution and deformation mechanism of Mg−Zn−Gd sheet during Erichsen cupping test
10.1016/s1003-6326(22)66141-7 · 2023
ZK60 based alloys with high-strength and high-ductility: A review
2023
Microstructures evolution, texture characteristics and mechanical properties of Mg-2.5Nd-0.5Zn-0.5Zr alloy during the high strain rate hot-rolling
10.1016/j.msea.2020.140488 · 2021
Development of a novel strength ductile Mg–7Al–5Zn alloy with high superplasticity processed by hard-plate rolling (HPR)
10.1016/j.jallcom.2017.11.348 · 2018
Role of grain boundary segregation on microstructural development in basal-textured Mg-Al-Zn alloy sheet
10.1016/j.scriptamat.2022.114828 · 2022
Developing a Mg alloy with ultrahigh room temperature ductility via grain boundary segregation and activation of non-basal slips
10.1016/j.ijplas.2023.103548 · 2023
Nucleation of recrystallization in magnesium alloy grains of varied orientation and the impacts on texture evolution
10.1016/j.jma.2022.09.006 · 2022
Ameliorating the mechanical properties of magnesium alloy: Role of texture
10.1016/j.msea.2017.02.067 · 2017
Texture analysis in hexagonal materials
10.1016/s0254-0584(03)00168-8 · 2003
The texture and anisotropy of magnesium–zinc–rare earth alloy sheets
10.1016/j.actamat.2006.11.013 · 2007
The origins of high hardening and low ductility in magnesium
10.1038/nature15364 · 2015
Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y
10.1016/s1359-6454(01)00297-x · 2001
Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications
10.1016/j.actamat.2012.10.044 · 2013
Activation and suppression of 〈c + a〉 dislocations in a textured Mg–3Al–1Zn alloy
10.1016/j.scriptamat.2019.11.057 · 2020
Enhanced ductility and strength of Mg-1Zn-1Sn-0.3Y-0.2Ca alloy achieved by novel micro-texture design
10.1016/j.scriptamat.2021.114119 · 2021
Enhanced ductility of Mg–1Zn–0.2Zr alloy with dilute Ca addition achieved by activation of non-basal slip and twinning
10.1016/j.msea.2021.141128 · 2021
Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
10.1016/j.ijplas.2004.05.018 · 2005
Microstructure and texture studies on twin-roll cast AZ31 (Mg-3 wt.%Al-1 wt.%Zn) alloy and the effect of thermomechanical processing
10.1016/j.msea.2010.10.003 · 2011
Effect of impurity reduction on dynamic recrystallization, texture evolution and mechanical anisotropy of rolled AZ31 alloy
10.1016/j.msea.2019.138741 · 2020
High strength-ductility synergy and low anisotropy of Mg-4.5Al-2.6Zn-0.3Mn alloy sheet achieved by annealing after rolling
10.1016/j.matlet.2022.133082 · 2022
The ordered orientation gradient “sandwich” texture induced high strength-ductility in AZ31 magnesium alloy
10.1016/j.scriptamat.2024.116296 · 2024
Enhanced Stretch Formability of Magnesium Alloy Sheet by Prestretching at Various Speeds at Higher Temperature
10.1007/s11837-019-03392-0 · 2019
Effects of Ca and Sr additions on microstructure, mechanical properties, and ignition temperature of hot-rolled Mg–Zn alloy
10.1016/j.msea.2019.138474 · 2020
Designing a low-alloyed Mg–Al–Sn–Ca alloy with high strength and extraordinary formability by regulating fine grains and unique texture
10.1016/j.msea.2022.143687 · 2022
Microstructural evolution and mechanical properties of AZ31 Mg alloy fabricated by a novel bifurcation-equal channel angular pressing
10.1007/s11771-024-5752-y · 2024
Static recrystallization behavior of the cold-rolled Mg-1Al-1Zn-0.1Ca-0.2Y magnesium alloy sheet
10.1016/j.jallcom.2022.168508 · 2023
Microstructure and texture evolution of Mg alloys during twin-roll casting and subsequent hot rolling
10.1016/j.scriptamat.2009.12.010 · 2010
Synergistic effects of solutes on active deformation modes, grain boundary segregation and texture evolution in Mg-Gd-Zn alloys
10.1016/j.msea.2022.143348 · 2022
Static recrystallization behaviour of cold rolled Mg-Zn-Y alloy and role of solute segregation in microstructure evolution
10.1016/j.scriptamat.2017.04.001 · 2017
First-principles study of stacking fault energies in Mg-based binary alloys
10.1016/j.commatsci.2013.07.012 · doi-reference
Effects of doping atoms on the generalized stacking-fault energies of Mg alloys from first-principles calculations
10.1016/j.scriptamat.2013.05.026 · doi-reference
Prominent role of high-volume fraction Mg17Al12 dynamic precipitations on multimodal microstructure formation and strength-ductility synergy of Mg–Al–Zn alloys processed by hard-plate rolling (HPR)
10.1016/j.msea.2021.140920 · doi-reference
Effect of large thickness-reduction on microstructure evolution and tensile properties of Mg-9Al-1Zn alloy processed by hard-plate rolling
10.1016/j.jmst.2021.01.050 · doi-reference
Achieving fine grain structure and superplasticity in AZ91-0.4Sn magnesium alloy using short flow rolling process
10.1016/j.msea.2017.03.108 · doi-reference
Effect of shear deformation on plasticity, recrystallization mechanism and texture evolution of Mg–3Al–1Zn alloy sheet: Experiment and coupled finite element-VPSC simulation
10.1016/j.jallcom.2019.07.015 · doi-reference
Effects of initial microstructure on the microstructural evolution and stretch formability of warm rolled Mg–3Al–1Zn alloy sheets
10.1016/j.msea.2013.08.067 · doi-reference
Effects of grain size, texture and twinning on mechanical properties and work-hardening behavior of AZ31 magnesium alloys
10.1016/j.msea.2011.07.076 · doi-reference
Effect of speed-ratio on microstructure, and mechanical properties of Mg–3Al–1Zn alloy, in differential speed rolling
10.1016/j.jallcom.2011.05.063 · doi-reference
Microstructure and mechanical properties of twin roll cast AM31 magnesium alloy sheet processed by differential speed rolling
10.1016/j.matdes.2011.06.060 · doi-reference
Texture and mechanical properties of ultrafine-grained Mg–3Al–1Zn alloy sheets prepared by high-ratio differential speed rolling
10.1016/j.msea.2010.09.007 · doi-reference
Exceptionally high strength in Mg–3Al–1Zn alloy processed by high-ratio differential speed rolling
10.1016/j.scriptamat.2011.09.029 · doi-reference
Effect of differential speed rolling on the anisotropy of mechanical properties and texture evolution of AZ31 Mg alloys
10.1016/j.jallcom.2010.03.186 · doi-reference
The improvement on mechanical anisotropy of AZ31 magnesium alloy sheets by multi cross-rolling process
10.1016/j.jallcom.2023.171252 · doi-reference
Microstructure and mechanical properties of Mg-6.75%Zn-0.57%Zr-0.4%Y-0.18%Gd sheets by unidirectional and cross rolling
10.1016/j.msea.2016.03.101 · doi-reference
Recrystallization and texture evolution of cold-rolled AZ31 Mg alloy treated by rapid thermal annealing
10.1016/j.jallcom.2015.09.155 · doi-reference
Effect of rolling speed on microstructure and mechanical properties of AZ31 Mg alloys rolled with a wide thickness reduction range
10.1016/j.msea.2014.09.024 · doi-reference
Effect of Al addition and rolling reduction on microstructure and texture evolution of Mg–3Sn alloy during high-speed rolling
10.1007/s10853-023-08990-7 · doi-reference
Recrystallization behavior and mechanical properties of AZ31B alloy during the hot-rolling process
10.1016/j.jmrt.2023.02.133 · doi-reference
Deformation mechanism and texture and microstructure evolution during high-speed rolling of AZ31B Mg sheets
10.1007/s10853-008-3021-3 · doi-reference
Static recrystallization behavior of magnesium AZ31 alloy subjected to high speed rolling
10.1016/j.msea.2016.03.047 · doi-reference
Correlation of static recrystallization and texture weakening of AZ31 magnesium alloy sheets subjected to high speed rolling
10.1016/j.msea.2016.07.107 · doi-reference
Influence of rolling speed on microstructure and mechanical properties of AZ31 Mg alloy rolled by large strain hot rolling
10.1016/j.msea.2014.04.024 · doi-reference
Effect of rolling speed on microstructure and mechanical properties of as-cast AZ31B alloy under different reduction schedules
10.1016/j.jmatprotec.2016.02.023 · doi-reference
Promotion of texture weakening in magnesium by alloying and thermomechanical processing. II: rolling speed
10.1007/s10853-013-7827-2 · doi-reference
Microstructural characteristics of magnesium alloy sheets subjected to high-speed rolling and their rolling temperature dependence
10.1016/j.jmrt.2018.11.020 · doi-reference
Feasibility of high strain-rate rolling of a magnesium alloy across a wide temperature range
10.1016/j.scriptamat.2012.05.036 · doi-reference
Influence of temperature and plastic relaxation on tensile twinning in a magnesium alloy
10.1016/j.scriptamat.2013.06.016 · doi-reference
Investigating the temperature dependency of plastic deformation in a Mg-3Al-1Zn alloy
10.1016/j.msea.2018.04.019 · doi-reference
Effect of deformation temperature on texture and mechanical properties of ZK60 magnesium alloy sheet rolled by multi-pass lowered-temperature rolling
10.1016/j.msea.2017.12.024 · doi-reference
Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals
10.1016/j.actamat.2010.11.064 · doi-reference
Effect of rare earth elements on the microstructure and texture development in magnesium–manganese alloys during extrusion
10.1016/j.msea.2010.07.081 · doi-reference
Promotion of texture weakening in magnesium by alloying and thermomechanical processing: (I) alloying
10.1007/s10853-013-7826-3 · doi-reference
The role of the Zn/Nd ratio in the microstructural evolution of the Mg-Zn-Nd system during static recrystallization: Grain boundary partitioning of solutes
10.1016/j.scriptamat.2017.01.033 · doi-reference
Effect of Rare-Earth Additions on the Texture of Wrought Magnesium Alloys: The Role of Grain Boundary Segregation
10.1007/s11661-013-1950-1 · doi-reference
Solute clustering and grain boundary segregation in extruded dilute Mg–Gd alloys
10.1016/j.scriptamat.2014.08.022 · doi-reference
Segregation and clustering of solutes at grain boundaries in Mg–rare earth solid solutions
10.1016/j.actamat.2014.06.004 · doi-reference
Anisotropic segregation-driven texture weakening in a dilute Mg-Al-Ca alloy during isothermal annealing
10.1080/21663831.2023.2237996 · doi-reference
The role of Ca, Al and Zn on room temperature ductility and grain boundary cohesion of magnesium
10.1016/j.jma.2021.03.005 · doi-reference
Effects of Calcium on Strength and Microstructural Evolution of Extruded Alloys Based on Mg-3Al-1Zn-0.3Mn
10.1007/s11661-019-05318-6 · doi-reference