Abstract
Contact and support
Need help, have a question, or want to contact the ResearchHub team?
© 2026 ResearchHub. Built for responsible scholarly connection.
Israel C. Godoy, Eduardo Flores, R. Mis-Fernández, V. Rejón, Inés Riech
Abstract
Authors
Institutions
Provenance
crossref
Confidence 100%
openalex
No local reference links have been materialized yet.
No local citing links have been materialized yet.
High-concentration silver alloying and steep back-contact gallium grading enabling copper indium gallium selenide solar cell with 23.6% efficiency
10.1038/s41560-024-01472-3 · 2024
Solar cell efficiency tables (version 66)
10.1002/pip.3919 · 2025
A novel Se-diffused selenization strategy to suppress bulk and interfacial defects in Sb2Se3 thin film solar cell
2024
Regulating deposition kinetics via a novel additive-assisted chemical bath deposition technology enables fabrication of 10.57%-efficiency Sb 2 Se 3 solar cells
10.1039/d2ee02261c · 2022
Sb2Se3 thin-film solar cells exceeding 10% power conversion efficiency enabled by injection vapor deposition technology
10.1002/adma.202202969 · 2022
Cu doping of Sb2Se3 thin films via thermal evaporation: tailoring structural and optical properties for enhanced photovoltaic performance
10.1016/j.optmat.2025.117362 · 2025
Enhanced grain orientation in Sb2Se3 thin films deposited on Mo/BSG substrates via RF-sputtering and selenization
10.1016/j.mssp.2024.108835 · 2024
9.2%-efficient core-shell structured antimony selenide nanorod array solar cells
10.1038/s41467-018-07903-6 · 2019
10.1109/pvsc.2017.8366746
Confidence 95%
datacite
Confidence 0%
10.1109/pvsc.2017.8366746
Detailed balance limit of efficiency of p-n junction solar cells
10.1063/1.1736034 · 1961
Substrate dependence on (Sb4Se6)n ribbon orientations of antimony selenide thin films: morphology, carrier transport and photovoltaic performance
10.1016/j.jallcom.2021.158703 · 2021
P3HT as a pinhole blocking back contact for CdTe thin film solar cells
10.1016/j.solmat.2017.07.005 · 2017
A review on the fundamental properties of Sb2Se3-based thin film solar cells
10.3390/en16196862 · 2023
Does Sb2 Se3 admit nonstoichiometric conditions? How modifying the overall Se content affects the structural, optical, and optoelectronic properties of Sb2 Se3 thin films
10.1021/acsami.1c20764 · 2022
Analysis of Se Co-evaporation and Post-selenization for Sb2Se3-based solar cells
10.1021/acsaem.1c02301 · 2021
Deep defects limiting the conversion efficiency of Sb2Se3 thin-film solar cells
10.1039/d2cp05585f · 2023
Effect of substrate temperature on structure, morphology and optical properties of Sb2Se3 thin films fabricated by chemical-molecular beam deposition method from Sb and Se precursors for solar cells
10.1016/j.tsf.2024.140218 · 2024
Critical review on crystal orientation engineering of antimony chalcogenide thin film for solar cell applications
10.1002/advs.202304963 · 2024
Growth and characterization of Sb2Se3 thin films for solar cells
10.1016/j.solener.2018.07.082 · 2018
Comparison of one and two-stage growth approaches for close space sublimation deposition of Sb2Se3 thin film solar cells
10.1016/j.mssp.2024.108161 · 2024
Optimizing crystal orientation and defect mitigation in antimony selenide thin-film solar cells through buffer layer energy band adjustment
10.1002/smll.202403292 · 2024
Suppressing buried interface nonradiative recombination losses toward high-efficiency antimony triselenide solar cells
10.1002/adma.202308522 · 2024
Quasi-vertically oriented Sb2Se3 Thin-film solar cells with open-circuit voltage exceeding 500 mV prepared via close-space sublimation and selenization
10.1021/acsami.1c13223 · 2021
Templated growth and passivation of vertically oriented antimony selenide thin films for high-efficiency solar cells in substrate configuration
10.1002/adfm.202110032 · 2022
Atomic-scale defect reconfiguration via thermally induced structural ordering for high-efficiency Sb2Se3 solar cells
10.1021/acsnano.5c10733 · 2025
A review on recent trends of Sb2Se3 thin film technology
10.32628/ijsrst251222662 · 2025
Distinctive deep-level defects in non-stoichiometric Sb2Se3 photovoltaic materials
10.1002/advs.202105268 · 2022
Investigation of electronic transport mechanisms in Sb2Se3 thin-film solar cells
10.1016/j.solmat.2019.04.003 · 2019
Screening and optimization of processing temperature for Sb2Se3 thin film growth protocol: Interrelation between grain structure, interface intermixing and solar cell performance
10.1016/j.solmat.2021.111045 · 2021
X. Quantitative measurement of preferred orientation in rolled uranium bars
10.1080/14786440108520972 · 1952
Precise calculation of crystallite size of nanomaterials: a review
10.1016/j.jallcom.2023.171914 · 2023
Refining 2-step hydrothermal deposition of Sb2(S, Se)3 films for solar cell and photoelectrochemical device applications
10.1007/s10853-025-11176-y · 2025
6.6% efficient antimony selenide solar cells using grain structure control and an organic contact layer
10.1016/j.solmat.2018.09.004 · 2018
Simultaneous band alignment modulation and carrier dynamics optimization enable highest efficiency in Cd‐Free Sb2Se3 solar cells
2024
10.1088/1402-4896/ad52d4
10.1088/1402-4896/ad52d4
Band gap temperature-dependence of close-space sublimation grown Sb2Se3 by photo-reflectance
10.1063/1.5027157 · 2018
Structural, morphological, and temperature-tuned bandgap properties of single-step thermally evaporated Sb2Se3 thin films
10.1007/s00339-024-07478-8 · 2024
Structural and optical properties of SbxSey thin films obtained by chemical molecular beam deposition method from Sb and Se precursors
10.1016/j.solener.2023.03.010 · 2023
Tabulated values of the Shockley-Queisser limit for single junction solar cells
10.1016/j.solener.2016.02.015 · 2016
No additional external references are available.