Synergistic lubrication and anti-wear mechanism of ZrO2@MXene hybrid fillers in polyimide coatings: role of MXene-to-ZrO2 mass ratio

The tribological properties of PAI/PI-PTFE coating filled by WC/Ta on 1010 steel and AS20 aluminum substrates under different temperatures and contact conditions

10.1134/s2070205123701393 · doi-reference

Synergistic effects of sepiolite and ZrO2-Y2O3 composite ceramics on the mechanical, thermal and tribological properties of copper-based powder metallurgy friction materials

10.1016/j.jallcom.2026.187798 · doi-reference

MXene and MXene/MoS2 solid lubricant coatings in journal bearings

10.1021/acsanm.4c07052 · doi-reference

Fundamental mechanisms underlying the effectiveness of nanoparticle additives to lubricants: 25 examples linking nano- to macroscale friction

10.3390/lubricants12060225 · doi-reference

Synthesis of nanoSiO2/graphene oxide nanocomposite as a novel engine oil additive for reducing friction and wear

10.1007/s10853-023-09258-w · doi-reference

MWCNT/TiO2 hybrid nanofiller toward high-performance epoxy composite

10.1016/j.ultsonch.2017.09.005 · doi-reference

Study on the thermal conductivity and insulation properties of polyimide composite films filled with surface-coated BNNs

10.1109/access.2026.3681113 · doi-reference

ZrO2 based nanostructures: a sustainable, economical, green and efficient organocatalyst

10.1016/j.molliq.2024.124223 · doi-reference

Tailoring thermomechanical performance of carbon fiber/polyimide composites via carbon nanotube interface engineering

10.1016/j.carbon.2025.120718 · doi-reference

Does the oxidation degree of carbon nanofibers affect the friction and corrosion resistance of their reinforced PI resins?

10.1016/j.surfin.2025.107817 · doi-reference

Thermally robust zirconia nanorod/polyimide hybrid films as a highly flexible dielectric material

10.1021/acsanm.1c01427 · doi-reference

Correlation between wear and thermal/mechanical parameters of Ti3C2Tx enhanced polyimide coating

10.1016/j.surfcoat.2025.132264 · doi-reference

Surface modification of YS-20 with polydopamine for improving the tribological properties of polyimide composites

10.1007/s40544-020-0473-1 · doi-reference

Attaching ZrO2 nanoparticles onto the surface of graphene oxide via electrostatic self-assembly for enhanced mechanical and tribological performance of phenolic resin composites

10.1007/s10853-019-03512-w · doi-reference

Multilayered curcumin-loaded hydrogel microcarriers with antimicrobial function

10.3390/molecules27041415 · doi-reference

The hydrodynamic permeability and surface property of polyethersulfone ultrafiltration membranes with mussel-inspired polydopamine coatings

10.1016/j.memsci.2012.06.045 · doi-reference

Crown ether copolymerized polyimide film: enhanced mechanical, thermal properties and low dielectric constant under high frequency

10.3390/polym16091188 · doi-reference

Comparative study of the tribological properties of diamond-like carbon and nitride coatings deposited on 40Cr surfaces

10.1007/s11837-025-07465-1 · doi-reference

Synthesis process, thermal and electrical behaviors of Ti3C2Tx MXene

10.1002/mawe.202300282 · doi-reference

Ultra-low wear in multifunctional Ti3C2Tx/PI composite films induced by tribo-chemistry mechanism

10.1016/j.reactfunctpolym.2023.105744 · doi-reference

Development of polyimide films reinforced with boron nitride and boron nitride nanosheets for transparent flexible device applications

10.1007/s12274-017-1856-0 · doi-reference

PDMS-PI composite coating toward multi-purpose development: Hydrophobic, low-friction/wear, and heat-resistance

10.1016/j.triboint.2023.108919 · doi-reference

Facile synthesis of soluble, self-crosslinkable and crystalline polyimides with ultrahigh thermal/chemical resistance

10.1016/j.polymer.2023.125717 · doi-reference

Combining the good tribological properties with the high adhesion strength of the amorphous carbon films in situ grown on PI

10.3389/fmats.2023.1138854 · doi-reference

Enhancing high-temperature wear resistance of Fe-based amorphous composite coatings via multi-layered TiNx architecture design

10.1016/j.surfcoat.2025.132449 · doi-reference

Understanding of fracture conditions and material response in a model TiN film/stainless steel substrate system–A cross-sectional scratch test study

10.1016/j.surfcoat.2022.128340 · doi-reference

Effects of coating thickness and interlayer properties on fretting fatigue crack initiation in the coating-substrate systems

10.1016/j.triboint.2025.110918 · doi-reference

Tribological properties of CrN/DLC and CrN coatings under different testing conditions

10.3390/coatings14081002 · doi-reference

Optimisation of mechanical properties of gradient Zr–C coatings

10.3390/ma14020296 · doi-reference

Tribological properties of diamond/diamond-like carbon (DLC) composite coating in a dry environment

10.3390/ma18163879 · doi-reference

Rapid and easy assessment of friction and load-bearing capacity in thin coatings

10.3390/electronics11030296 · doi-reference

Preparation and tribological properties of CrN–MoS₂ gradient structure films

10.1007/s00339-025-09182-7 · doi-reference

High-strength and wear-resistant Babbitt alloy coatings prepared through in-situ alloying

10.1016/j.surfcoat.2024.131416 · doi-reference

Challenges and solutions for high-speed aviation piston pumps: a review

10.3390/aerospace8120392 · doi-reference

Temperature dynamic characteristics analysis and thermal load dissipation assessment for airliner hydraulic system in a full flight mission profile

10.3390/machines10040258 · doi-reference