Abstract
No public abstract is available from the verified source records.
Farhad Nabhani
Abstract
Authors
Institutions
No ROR-resolved institution is linked to this work yet.
Provenance
crossref
Confidence 100%
unpaywall
Confidence 95%
datacite
Confidence 0%
No local reference links have been materialized yet.
No local citing links have been materialized yet.
Unresolved referenced work
Kept as external metadata until matched
Titanium alloys and their machinability — a review
10.1016/s0924-0136(96)00030-1 · 1997
Advanced coated ceramic tools for machining superalloys
10.1016/s0890-6955(96)00075-2 · 1997
Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti-6Al-6V-2Sn
10.1016/s0043-1648(96)07255-9 · 1997
Cutting temperature of ceramic tools in high speed machining of difficult-to-cut materials
10.1016/0890-6955(95)00043-7 · 1996
Carbide tool wear mechanism in turning of Inconel 718 superalloy
10.1016/0043-1648(95)06644-6 · 1996
Development of new ceramic cutting tools with alumina coated carbide powders
10.1016/s0890-6955(99)00102-9 · 2000
Cuttability investigation of coated carbides
10.1080/10426919908914850 · 1999
Mechanical behaviour of PVD- and CVD-coated hard metals under cyclic loads
10.1016/s0263-4368(99)00010-4 · 1999
Wear of advanced ceramics for tool materials
10.1016/s0043-1648(99)00014-9 · 1999
Effects of machining conditions on the flank wear of TiN-coated high speed steel tool inserts
10.1016/0043-1648(95)80019-0 · 1995
10.1016/s0043-1648(98)00362-7
10.1016/s0043-1648(98)00362-7
Development of an advanced ceramic tool material — functionally gradient cutting ceramics
1998
Machining tests on multi-layer coated cemented carbide cutting tools
10.1016/s0026-0657(97)88798-x · 1997
Tool wear mechanism in continuous cutting of hardened tool steels
10.1016/s0043-1648(97)00139-7 · 1997
Unresolved referenced work
Kept as external metadata until matched
CVD diamond
10.1016/s0042-207x(99)00147-5 · 2000
Tribological properties of smooth diamond coatings for cutting tools
10.1016/s0043-1648(99)00035-6 · 1999
10.1016/s0890-6955(97)00076-x
10.1016/s0890-6955(97)00076-x
Diamond-coated tools
10.1016/s0925-9635(98)00363-x · 1999
Diamond coatings on cemented tungsten carbide tools by low-pressure microwave CVD
10.1016/s0043-1648(98)00337-8 · 1999
Diamond coated silicon nitride cutting tool inserts
10.1016/s0026-0657(97)86630-1 · 1997
Optimization of cutting parameters for maximizing tool life
10.1016/s0890-6955(98)00028-5 · 1999
Production of diamond impregnated cutting tools
10.1016/s0026-0657(99)80192-1 · 1999
Silicon carbonitride
10.1016/s0925-9635(98)00228-3 · 1998
Diamond and cubic boron nitride coatings for tools
10.1016/s0026-0657(97)84627-9 · 1998
Cubic boron nitride for cutting nickel base materials
10.1016/s0026-0657(97)84642-5 · 1998
Diamond turning of silicon substrates in ductile-regime
10.1016/s0924-0136(97)00210-0 · 1998
Diamond coatings and cBN coatings for tools
10.1016/s0263-4368(98)80100-5 · 1998
Tear-off wear mechanism of sintered diamond tool in cutting SiC-particle-strengthened epoxy composites
10.1016/s0043-1648(96)07458-3 · 1997
The new diamond-coated carbide cutting tools
10.1016/0925-9635(95)00347-9 · 1996
Wear resisting properties applications of polycrystalline diamond
10.1016/s0026-0657(97)86791-4 · 1997
Unresolved referenced work
Kept as external metadata until matched
Unresolved referenced work
Kept as external metadata until matched
10.1016/0043-1648(82)90113-2
10.1016/0043-1648(82)90113-2
Unresolved referenced work
Kept as external metadata until matched
10.1016/0043-1648(81)90242-8
10.1016/0043-1648(81)90242-8
10.1016/s0924-0136(97)00099-x
10.1016/s0924-0136(97)00099-x
Prediction of chip flow direction, cutting forces and surface roughness in finish turning
10.1115/1.2830102 · 1998
Built-up edge elimination in mirror cutting of hardened steel
10.1115/1.2803279 · 1995
10.1179/sur.1985.1.1.1
10.1179/sur.1985.1.1.1 · doi-reference
10.1016/0043-1648(85)90210-8
10.1016/0043-1648(85)90210-8 · doi-reference
10.1179/mst.1986.2.1.59
10.1179/mst.1986.2.1.59 · doi-reference
New concept for decoupling the cutting forces due to tool flank wear and chip formation in hard turning
10.1080/10940349808945660 · doi-reference