Abstract
No public abstract is available from the verified source records.
R. Ghosh, X.D. Fang
Abstract
Authors
Institutions
No ROR-resolved institution is linked to this work yet.
Provenance
crossref
Confidence 100%
unpaywall
Confidence 95%
datacite
Confidence 0%
No local reference links have been materialized yet.
No local citing links have been materialized yet.
Development of a general cutting analysis for machining with plane face tools
1983
Unresolved referenced work
1969
Prediction of chip flow direction and cutting forces in oblique machining with nose radius tools
1995
The effect of cutting parameters on chip side-curl mechanisms and variable tool-chip contact in turning
1999
Side carl of chips - its importance and prediction in metal cutting
1973
A finite element analysis of void evolution in 2-D machining
2002
Predicting the angle of chip flow for single-point cutting tools
1954
Metal cutting mechanics and applications
1990
On the non-uniqueness of the machining process
1978
An analysis of cutting using a grooved tool
2000
Finite element modeling and analysis of residual stresses in machining
2003
An analytical predictive model and experimental validation for machining with grooved tools incorporating the effects of strains, strain-rates and temperatures
10.1016/s0007-8506(07)61471-1 · 2002
10.1016/s0020-7403(99)00117-4
10.1016/s0020-7403(99)00117-4 · 2001
An analytical model for cyclic chip formation in 2-D machining with chip breaking
1996
Modeling the chip-work contact force for chip breaking in orthogonal machining with a fiat-faced tool
1998
A new methodology for on-line estimation of chip-flow direction in oblique machining
1992
An investigation of 3-D chip curl in machining - Part 1: a mechanics-based analytical model
10.1080/10940349808945661 · 1998
Estimation of chip side-flow in machining with complex grooved tools using a force ratio method
1994
The Equivalent Toolface (ET) approach for modeling chip curl in machining with grooved tools
1996
A new feature-based chip-groove classification system for chip breakability assessment in finish turning
1995
Stress distribution in the continuous chip - a solution to the paradox of chip curl
1950
The mechanics of machining: a new approach
10.1016/0022-5096(54)90038-1 · 1954
Allowing for end cutting edge effects in predicting forces in bar turning with oblique machining conditions
1986
A Theoretical and Experimental Study of the Effects of Tool Restricted Contact on Chip Breaking
1986
The tool restricted contact effect as a major influencing factor in chip breaking: an experimental analysis
10.1016/s0007-8506(07)61600-x · 1988
On the controllability of chip breaking cycles and modes of chip breaking in metal machining
10.1016/s0007-8506(07)61000-2 · 1990
An investigation of three-dimensional chip flow in machining of steels with grooved chip forming tool inserts
1991
A knowledge-based approach for designing effective grooved chip breakers - 2D and 3D chip flow, chip curl and chip breaking
10.1007/bf01186875 · 1995
A comprehensive evaluation of tool inserts for chip control using fuzzy modeling of machinability parameters
1993
New developments in chip control research: moving towards chip breakability predictions for unmanned manufacture
1988
Recent developments in chip control research and applications. Keynote Paper
10.1016/s0007-8506(07)62531-1 · 1993
An analysis of chip curl development, chip deformation and chip breaking in orthogonal machining
1995
Towards integration of hybrid models for optimized machining performance in intelligent manufacturing systems
2000
Some slip-line fields for swaging or expanding, indenting, extruding and machining for tools with curved dies
10.1016/s0020-7403(62)80022-8 · 1962
Cutting with tools having a rounded cutting edge
1967
Present knowledge of chip control. Keynote Paper
1979
Size effects in metal removal processes
1984
Some new slip-line solutions for two-dimensional steady-state machining
10.1016/0020-7403(65)90084-6 · 1965
Computer simulation of orthogonal metal cutting processes: determination of material properties and effects of tool geometry on chip flow
1997
The theory of plasticity applied to a problem of machining
10.1115/1.4010357 · 1951
Allowing for nose radius effects predicting the chip-flow direction and cutting forces in bar turning
10.1243/pime_proc_1987_201_108_02 · doi-reference
Development of a general tool model for turning operations based on a variable flow stress theory
10.1016/0890-6955(94)e0004-3 · doi-reference
Present situation and future trends in modelling of machining operations
10.1016/s0007-8506(07)63244-2 · doi-reference
Analytical prediction of three dimensional cutting process - part 2: chip formation and cutting force with conventional single-point cutting tool
10.1115/1.3439414 · doi-reference
The mechanical behavior of zinc during machining
10.1115/1.2804526 · doi-reference
Modeling chip formation with grooved tools
10.1016/0020-7403(93)90022-m · doi-reference
A plasticity problem involving plane strain and plane stress simultaneously: groove formation in the machining of high temperature alloys
10.1115/1.3670904 · doi-reference
An analysis for orthogonal cutting with restricted tool chip contact
10.1016/s0020-7403(62)80035-6 · doi-reference
Comprehensive chip form classification based on the cutting mechanism
10.1016/s0007-8506(07)61155-x · doi-reference
Basic mechanics of metal cutting process
10.1115/1.4009380 · doi-reference
Understanding the finite element analysis results under the framework of Oxley's machining model
10.1080/10910340500196587 · doi-reference
Finite element analysis and simulation of machining: an addendum: a bibliography (1996–2002)
10.1016/s0890-6955(02)00162-1 · doi-reference
Mechanics of oblique machining: predicting chip geometry and cutting forces front work material properties and cutting conditions
10.1177/002034837218600151 · doi-reference