Influence of dwell time on fatigue crack propagation in alloy 718 laser welds
10.1016/j.msea.2017.08.049 · doi-reference
High throughput evaluation of the effect of Mg concentration on natural ageing of Al-Cu-Li-(Mg) alloys
10.1016/j.scriptamat.2018.03.024 · doi-reference
Magnetic modulation of keyhole instability during laser welding and additive manufacturing
10.1126/science.ado8554 · doi-reference
Effect of static magnetic field on the molten pool dynamics during laser powder bed fusion of inconel 718 superalloy
10.1016/j.ijthermalsci.2023.108851 · doi-reference
Effects of an external magnetic field on keyhole mode laser melting of 316 stainless steel: Alamdari, Clark, Fezzaa, and Wolff
10.1007/s11837-025-07400-4 · doi-reference
Mechanisms of ultrasonic vibration induced porosity control and mechanical properties improvement in laser directed energy deposition
10.1002/adem.202501895 · doi-reference
Synergistic enhancement in laser manufacturing: a review of ultrasonic vibration assisted laser manufacturing (UVA-LM)
10.1016/j.jallcom.2025.184743 · doi-reference
High-speed synchrotron X-ray imaging of melt pool dynamics during ultrasonic melt processing of Al6061
10.1038/s43246-024-00584-3 · doi-reference
In situ observation of melt pool evolution in ultrasonic vibration-assisted directed energy deposition
10.1038/s41598-023-44108-4 · doi-reference
Influence of ultrasonic vibration on molten pool behavior, cladding layer microstructure and pore defects for directed energy deposition
10.1016/j.applthermaleng.2024.123047 · doi-reference
Non-contact ultrasound to assist laser additive manufacturing
10.1038/s41467-025-62803-w · doi-reference
The influence of laser power modulation on melt pool dynamics in laser powder bed fusion
10.1063/5.0282181 · doi-reference
Comparison between modulated-pulsed and continuous wave laser powder bed fusion on an inconel 625 alloy
10.1007/s40964-025-01050-3 · doi-reference
Additive manufacturing of continuous wave and pulsed wave L-PBF Ti64 thin cross sections
10.1007/s40964-024-00804-9 · doi-reference
Melt pool analysis in DED-LB/M with freeform beam shaping based on high-speed imaging
10.1007/s40964-025-01389-7 · doi-reference
In-situ process monitoring and adaptive quality enhancement in laser additive manufacturing: a critical review
10.1016/j.jmsy.2024.04.013 · doi-reference
Achieving high efficiency and uniform microstructure via high-power thick-layer top-hat laser powder bed fusion
10.1016/j.jmapro.2025.11.081 · doi-reference
Microstructure-Based modeling of laser beam shaping during additive manufacturing: Moore, Orlandi, Rodgers, Moser, Murdoch. and Abdeljawad
10.1007/s11837-023-06363-8 · doi-reference
Revealing the effects of laser beam shaping on melt pool behaviour in conduction-mode laser melting
10.1016/j.jmrt.2023.11.046 · doi-reference
Influence of different beam shapes on melt pool geometry of single melt tracks on IN718
10.1007/s40964-024-00775-x · doi-reference
Machine learning enabling prediction in mechanical performance of Ti6Al4 V fabricated by large-scale laser powder bed fusion via a stacking model
10.1007/s11465-024-0796-0 · doi-reference
A modified volumetric energy density-based approach for porosity assessment in additive manufacturing process design
10.1007/s00170-020-05949-9 · doi-reference
Selective laser melting additive manufacturing of pure tungsten: role of volumetric energy density on densification, microstructure and mechanical properties
10.1016/j.ijrmhm.2019.105025 · doi-reference
On the limitations of volumetric energy density as a design parameter for selective laser melting
10.1016/j.matdes.2016.10.037 · doi-reference
Effect of powder spatter and denudation on the surface quality of laser additive manufactured aluminum alloys
10.1016/j.optlastec.2025.114112 · doi-reference
Powder bed surface relief formation and denudation in selective laser melting
10.1007/s00170-022-10197-0 · doi-reference
Investigation of effects of process parameters on microstructure and hardness of SLM manufactured SS316L
10.1016/j.jallcom.2018.01.098 · doi-reference
Numerical and experimental investigation into powder entrainment and denudation phenomena in laser powder bed fusion process
10.1016/j.powtec.2022.117907 · doi-reference
Effect of processing gas on spatter generation and oxidation of TiAl6V4 alloy in laser powder bed fusion process
10.1016/j.apsusc.2022.156089 · doi-reference
Velocity and angle of spatter in fine laser processing
10.1016/j.phpro.2012.10.102 · doi-reference
Spattering and denudation in laser powder bed fusion process: multiphase flow modelling
10.1016/j.actamat.2020.06.033 · doi-reference
Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties
10.1016/j.matdes.2016.12.060 · doi-reference
A novel additive manufacturing process metric for predicting spatter-related porosity in laser powder Bed fusion
10.1007/s40192-024-00376-0 · doi-reference
Influence of spattering on in-process layer surface roughness during laser powder bed fusion
10.1016/j.jmapro.2023.08.058 · doi-reference
Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
10.1038/s41598-017-04237-z · doi-reference
In-situ monitoring plume, spattering behavior and revealing their relationship with melt flow in laser powder bed fusion of nickel-based superalloy
10.1016/j.jmst.2023.07.068 · doi-reference
Effects of scan speed on vapor plume behavior and spatter generation in laser powder bed fusion additive manufacturing
10.1016/j.jmapro.2018.09.011 · doi-reference
Influence of laser energy input and shielding gas flow on evaporation fume during laser powder bed fusion of Zn metal
10.3390/ma14102677 · doi-reference
Vaporization of alloying elements and explosion behavior during laser powder bed fusion of Cu-10Zn alloy
10.1016/j.ijmachtools.2020.103686 · doi-reference
Defects caused by powder spattering and entrainment in laser powder bed fusion process: high-fidelity modeling of gas, melt pool and powder dynamics
10.1016/j.actamat.2025.120816 · doi-reference
