Abstract
Abstract
The Critical Heat Flux (CHF) is an important parameter, which limits the thermal hydraulic performance of the nuclear fuel bundle. The tools available for the prediction of the CHF are empirical in nature and are valid for their experimental range only. However, the recently developed Look-Up Table (LUT) approach has emerged to be a promising tool for predicting CHF in a tubular geometry over a wide range of parameters, which can be extended to the rod bundle geometry considering correction factors for the rod bundle effects. The error statistics of the present assessment confirms the values provided with the LUT for the HBM approach for the tubular application. However, the error statistics by DSM (not provided with the LUT development) is found to be quite different from that of the HBM. It is found that CHF in the rod bundle can also be predicted with a good accuracy using the Heat Balance Method (HBM). The proposed correction factor is found to improve the prediction accuracy of the LUT for the rod bundle application. This paper deals with the assessment of the CHF prediction by LUT for the tubular and bundle geometry and evaluation of the correction factor for rod bundle at the normal operating pressure of BWR (70 bar) using the experimental data base.