Change of Hot Cracking Susceptibility in Welding of High Strength Aluminum Alloy AA 7075
10.1016/j.phpro.2016.08.048 · doi-reference
High-power laser oscillation-arc hybrid welding of high-strength 7075 aluminum alloys with enhanced fatigue resistance
10.1016/j.ijfatigue.2026.109752 · doi-reference
10.3390/ma10020106
10.3390/ma10020106 · doi-reference
The influence of process parameters on porosity formation in hybrid LASER-GMA welding of AA6082 aluminum alloy
10.1016/j.optlastec.2011.12.014 · doi-reference
10.3390/ma17184657
10.3390/ma17184657 · doi-reference
Effects of relative positioning of energy sources on weld integrity for hybrid laser arc welding
10.1016/j.optlaseng.2016.01.010 · doi-reference
The influence of the arrangement for fiber laser and TIG on the hybrid welding process
10.1016/j.optlastec.2024.110564 · doi-reference
Welding stability and fatigue performance of laser welded low alloy high strength steel with 20 mm thickness
10.1016/j.optlastec.2021.106941 · doi-reference
Effects of heat source arrangements on Laser-MAG hybrid welding characteristics and defect formation mechanism of 10CrNi3MoV steel
10.1016/j.jmapro.2020.08.027 · doi-reference
Laser induced arc dynamics destabilization in laser-arc hybrid welding
10.1088/1361-6463/ab5758 · doi-reference
Friction stir lap joining of 2198 aluminum-lithium alloy with weaving and pulsing variants
10.1016/j.jmapro.2014.12.002 · doi-reference
Friction stir lap welding of AA2024-T4 with drastically different thickness
10.1007/s00170-019-04865-x · doi-reference
10.1177/02670836251345981
10.1177/02670836251345981 · doi-reference
10.3390/ma18030645
10.3390/ma18030645 · doi-reference
10.3390/met9121264
10.3390/met9121264 · doi-reference
Effect of welding parameters on microstructure and mechanical properties of AA6061-T6 butt welded joints by stationary shoulder friction stir welding
10.1016/j.matdes.2014.07.046 · doi-reference
Temperature evolution, microstructure, and properties of friction stir welded ultra-thick 6082 aluminum alloy joints
10.1007/s00170-020-05422-7 · doi-reference
Influence of welding parameters on the microstructure, thermal fields and defect formation in AA7075-T6 friction stir welds
10.1007/s40194-020-00869-4 · doi-reference
Cellular automata finite element (CAFE) model to predict the forming of friction stir welded blanks
10.1016/j.commatsci.2012.01.036 · doi-reference
A review of microstructural changes occurring during FSW in aluminium alloys and their modelling
10.1016/j.jmatprotec.2020.116706 · doi-reference
Numerical simulation of heat transfer and fluid flow during vacuum electron beam welding of 2219 aluminium girth joints
10.1016/j.vacuum.2020.109256 · doi-reference
10.3390/ma16217028
10.3390/ma16217028 · doi-reference
Characterisation of electron beam welded aluminium alloys
10.1179/136217199101537941 · doi-reference
Numerical Investigation on Molten Pool Dynamics and Defect Formation in Electron Beam Welding of Aluminum Alloy
10.1007/s11665-020-05111-2 · doi-reference
Interfacial reactions between sapphire and Ag-Cu-Ti-based active braze alloys
10.1016/j.actamat.2015.11.019 · doi-reference
Proposal for a new technique to join CFC composites to copper
10.1016/j.jnucmat.2005.09.007 · doi-reference
Brazing of graphite to Cu with Cu50TiH2 + C composite filler
10.1007/s10853-015-9415-0 · doi-reference
Effect of brazing temperature on microstructure and mechanical properties of graphite/copper joints
10.1016/j.msea.2013.11.059 · doi-reference
Microstructure, mechanical properties and hermeticity of W-Cu/HTCC brazed joints with surface metallization
10.1016/j.ijrmhm.2023.106473 · doi-reference
Microstructural Investigation of W-Cu Composite and 1Cr18Ni9 Stainless Steel Brazed Joint with Ag-Cu Filler Metal
10.1515/htmp-2013-0062 · doi-reference
10.3390/met15080857
10.3390/met15080857 · doi-reference
Microstructure and phase constitution near the interface of Cu/Al vacuum brazing using Al-Si filler metal
10.1016/j.vacuum.2007.11.007 · doi-reference
10.3390/met12061042
10.3390/met12061042 · doi-reference
Advanced submerged arc welding processes for Arctic structures and ice-going vessels
10.1177/0954405416636037 · doi-reference
Joining of Ramor 500 Steel with SAW (Submerged Arc Welding) and its Evaluation of Thermomechanical Analysis in ANSYS Package Software
10.1016/j.tsep.2019.100396 · doi-reference
10.3390/ma16082971
10.3390/ma16082971 · doi-reference
Comparative study on successive and simultaneous double-sided laser beam welding of AA6056/AA6156 aluminum alloy T-joints for aircraft fuselage panels
10.1007/s00170-018-1996-8 · doi-reference
The cryogenic shear property and fracture mechanism for 2219 aluminum alloy T-joint fabricated by dual laser-beam bilateral synchronous welding
10.1016/j.matlet.2021.129555 · doi-reference
Additively manufactured crack-free nickel-based superalloy with synergistic strength and plasticity via grain refinement and striped oxides inhibition
10.1016/j.compositesb.2024.112038 · doi-reference
Excellent mechanical properties and superelasticity: Bimodal heterostructure enhances NiTi alloy fabricated via laser powder bed fusion
10.1016/j.ijplas.2025.104544 · doi-reference
