Time-controlled 3D printing of high-ductility cementitious composites with circumferential printing path for coating of prestressed concrete cylinder pipe

Experimental study on external loading performance of large diameter prestressed concrete cylinder pipe

10.3390/buildings12101740 · doi-reference

Influence of precast foam on the pore structure and properties of fly ash-based geopolymer foams

10.1016/j.conbuildmat.2020.119410 · doi-reference

Correlation between macroscopic properties and microscopic pore structure in steel-basalt hybrid fibers reinforced cementitious composites subjected to elevated temperature

10.1016/j.conbuildmat.2022.129988 · doi-reference

Preparation and properties of engineered cementitious composites incorporating a high volume of fly ash

10.1177/0361198120919406 · doi-reference

Analysis of freeze-thaw damage and pore structure deterioration of mortar by low-field NMR

10.1016/j.conbuildmat.2021.126097 · doi-reference

Use of numerical methods for identifying the number of wire breaks in prestressed concrete cylinder pipe by piezoelectric sensing technology

10.1016/j.conbuildmat.2020.121207 · doi-reference

Bending strength of connection joints of prestressed reinforced concrete pipe piles

10.3390/buildings13010119 · doi-reference

Serviceability assessment of prestressed concrete cylinder pipes with broken wires: Analytical solution and numerical simulation [J]

10.1016/j.tust.2022.104551 · doi-reference

A review of recent advances in the science and technology of seawater-mixed concrete

10.1016/j.cemconres.2021.106666 · doi-reference

Experimental study on the influence of scattered broken wires on the structural performance of prestressed concrete cylinder pipe

10.1016/j.istruc.2022.11.055 · doi-reference

Interfacial bond properties between 3D printed engineered cementitious composite (ECC) and post-cast concrete

10.1016/j.cemconcomp.2024.105897 · doi-reference

Pressure test of a prestressed concrete cylinder pipe using distributed fiber optic sensors: Instrumentation and results

10.1016/j.engstruct.2022.114835 · doi-reference

Time-dependent fresh properties characterization of 3D printing engineered cementitious composites (3DP-ECC): on the evaluation of buildability

10.1016/j.cemconcomp.2022.104704 · doi-reference

Influence of printing parameters on 3D printing engineered cementitious composites (3DP-ECC)

10.1016/j.cemconcomp.2022.104562 · doi-reference

Mixed-mode interfacial fracture behavior of ultra-thin overlay system with high-strength ECC: Kinking-and-trapping mechanism [J]

10.1016/j.conbuildmat.2026.146895 · doi-reference

Beyond performance-cost trade-off: engineered Geopolymer Composites (EGC) incorporating ultra-high-volume coal gangue wastes

10.1016/j.jclepro.2026.148729 · doi-reference

Upcycling red mud into high-strength high-ductility Engineered Geopolymer Composites (EGC): Toward superior performance and sustainability

10.1016/j.compositesb.2025.112713 · doi-reference

3D concrete printing modelling of thin-walled structures

10.1016/j.istruc.2022.03.049 · doi-reference

Printability region for 3D-printable engineered cementitious composites (3DP-ECC) [J]

10.1016/j.cemconcomp.2024.105599 · doi-reference

Rheology of 3D printable concrete prepared by secondary mixing of ready-mix concrete

10.1016/j.cemconcomp.2023.104958 · doi-reference

Effect of silica fume utilization on structural build-up, mechanical and dimensional stability performance of fiber-reinforced 3d printable concrete

10.3390/polym16040556 · doi-reference

Advancing 3D Printable Concrete with Nanoclays: Rheological and Mechanical Insights for Construction Applications

10.3390/jcs9080449 · doi-reference

Fresh and strength properties of 3D printable concrete mixtures utilising a high volume of sustainable alternative binders

10.1016/j.conbuildmat.2024.135474 · doi-reference

Micromechanical design based on microscale fiber/matrix interactions for single PE fiber pullout

10.1016/j.conbuildmat.2024.135117 · doi-reference

Mechanical performance of Strain-Hardening Cementitious Composites (SHCC) with hybrid polyvinyl alcohol and steel fibers

10.1016/j.compstruct.2019.111198 · doi-reference

Micromechanics theory guidelines and method exploration for surface treatment of PVA fibers used in high-ductility cementitious composites

10.1016/j.conbuildmat.2018.11.118 · doi-reference

Numerical investigations into the failure mode of buried prestressed concrete cylinder pipes under differential settlement [J]

10.1016/j.engfailanal.2020.104492 · doi-reference

Experimental and numerical study on CFRP-lined prestressed concrete cylinder pipe under internal pressure

10.1016/j.engstruct.2019.03.106 · doi-reference

Effects of prestressing wire corrosion on the load response law and bearing capacity of PCCP

10.1016/j.compstruct.2024.117933 · doi-reference

Monitoring the circumferential cracking of inner concrete core in prestressed concrete cylinder pipe during wire-wrapping using distributed optical fiber sensors

10.1016/j.tust.2024.106330 · doi-reference

Load response law and failure mechanism of buried prestressed concrete cylinder pipe with corroded prestressed steel wires

10.1016/j.tust.2025.106906 · doi-reference

Experimental study on the mechanical properties and durability of high-performance concrete for jacking prestressed concrete cylinder pipe

10.1016/j.conbuildmat.2025.144163 · doi-reference

Mechanical behavior of prestressed concrete cylinder pipe strengthened by prestressed CFRP subject to secondary load

10.1177/13694332251325107 · doi-reference

Failure analysis, condition assessment technologies, and performance prediction of prestressed-concrete cylinder pipe: state-of-the-art literature review

10.1061/(asce)cf.1943-5509.0000424 · doi-reference

Effect of the location of broken wires on prestressed concrete cylinder pipes under working pressure

10.3390/coatings12091361 · doi-reference