Abstract
No public abstract is available from the verified source records.
Chia-Ho Wu, Zheng Hui Phua, Wei Ping Chan, Grzegorz Lisak
Abstract
Authors
Institutions
No ROR-resolved institution is linked to this work yet.
Provenance
crossref
Confidence 100%
unpaywall
Confidence 95%
datacite
Confidence 0%
No local reference links have been materialized yet.
No local citing links have been materialized yet.
A life cycle assessment of clinker and cement production in Ethiopia
10.1016/j.cesys.2024.100180 · 2024
Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry
10.1016/j.cemconres.2018.03.015 · 2018
Reducing clinker factor in limestone calcined clay-slag cement using C-S-H seeding – A way towards sustainable binder
10.1016/j.cemconres.2023.107151 · 2023
A review of alternative approaches to the reduction of CO2 emissions associated with the manufacture of the binder phase in concrete
10.1016/j.cemconres.2015.04.012 · 2015
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
10.1016/j.jclepro.2011.02.010 · 2011
Geopolymers and Related Alkali-Activated Materials
10.1146/annurev-matsci-070813-113515 · 2014
Mechanism of Geopolymerization and Factors Influencing Its Development: A Review
10.1007/s10853-006-0401-4 · 2007
Advances and developments in high strength geopolymer concrete for sustainable construction – A review
10.1016/j.cscm.2025.e04669 · 2025
A review: The comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements
10.1016/j.cemconres.2010.03.020 · 2010
Unresolved referenced work
Kept as external metadata until matched
Synergistic preparation of high-performance composite blast furnace slag powder from multiple industrial solid wastes: Performance regulation and optimization
10.1016/j.conbuildmat.2023.134231 · 2024
Unresolved referenced work
Kept as external metadata until matched
Municipal solid waste management: A review of waste to energy (WtE) approaches
10.15376/biores.16.2.ram · 2021
High temperature slagging gasification of municipal solid waste with biomass charcoal as a greener auxiliary fuel
2022
Life cycle assessment of pyrolysis, gasification and incineration waste-to-energy technologies: Theoretical analysis and case study of commercial plants
10.1016/j.scitotenv.2018.01.151 · 2018
Co-gasification of municipal solid waste and material recovery in a large-scale gasification and melting system
10.1016/j.wasman.2011.10.019 · 2012
High temperature slagging gasification demonstration-scale trial of sewage sludge: Feasibility analysis towards mono treatment, operational challenges and life-cycle assessment
10.1016/j.wasman.2025.114945 · 2025
Impact of chemical variability of ground granulated blast-furnace slag on the phase formation in alkali-activated slag pastes
10.1016/j.cemconres.2016.09.003 · 2016
Construction material properties of slag from the high temperature arc gasification of municipal solid waste
10.1016/j.wasman.2016.03.031 · 2016
Replacement of natural sand with MSW gasification slag as an alternative fine aggregate in greener concrete production
10.1016/j.wasman.2025.115244 · 2026
10.2991/seee-15.2015.47
10.2991/seee-15.2015.47
Effects of Fineness and Chemical Composition of Blast Furnace Slag on Properties of Alkali-Activated Binder
10.3390/ma12203447 · 2019
Comparison of test methods to assess pozzolanic activity
10.1016/j.cemconcomp.2009.10.008 · 2010
Development and Properties of New Mullite Based Refractory Grog
10.3390/ma14040779 · 2021
Characterization of supplementary cementitious materials by thermal analysis
10.1617/s11527-016-0909-2 · 2016
Development of geopolymer concrete mixes with ambient air curing
10.1088/1757-899x/1116/1/012160 · 2021
The effects of SiO2/Na2O molar ratio on the characteristics of alkali-activated waste catalyst–metakaolin based geopolymers
10.1016/j.conbuildmat.2015.07.028 · 2015
Effect of Na2O content, SiO2/Na2O molar ratio, and curing conditions on the compressive strength of FA-based geopolymer
10.1016/j.conbuildmat.2017.04.004 · 2017
Method for quantifying the reaction degree of slag in alkali-activated cements using deep learning-based electron microscopy image analysis
10.1111/jmi.13094 · 2022
Investigation of a supplementary cementitious material with three reactive components: the example of a carbonated mineral composite
10.1016/j.cemconcomp.2025.106179 · 2025
Unresolved referenced work
Kept as external metadata until matched
Life cycle assessment of alkali-activated materials: a systematic literature review
10.1007/s44242-023-00014-6 · 2023
Cement substitution with secondary materials can reduce annual global CO2 emissions by up to 1.3 gigatons
10.1038/s41467-022-33289-7 · 2022
Ecological Upgrade of Normal-Strength Mortars by Using High Volume of GGBS
2020
Unresolved referenced work
Kept as external metadata until matched
Unresolved referenced work
Kept as external metadata until matched
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
10.1016/j.conbuildmat.2013.01.023 · 2013
Unresolved referenced work
Kept as external metadata until matched
Unresolved referenced work
Kept as external metadata until matched
A study on the characteristics and microstructures of GGBS/FA based geopolymer paste and concrete
10.1016/j.conbuildmat.2019.03.291 · 2019
Converting ash into reusable slag at lower carbon footprint: Vitrification of incineration bottom ash in MSW-fueled demonstration-scale slagging gasifier
10.1016/j.jenvman.2023.119967 · doi-reference
Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers
10.1016/j.colsurfa.2006.12.064 · doi-reference
Strength development, phase evolution, microstructure change and environmental leaching behavior of alkali-activated copper slag
10.1016/j.conbuildmat.2025.141037 · doi-reference
Basic oxygen furnace and ground granulated blast furnace slag based alkali-activated pastes: Characterization and optimization
10.1016/j.jclepro.2021.129483 · doi-reference
Synthesis and Morphology of Slag-based Alkali-Activated Materials, Mining
10.1007/s42461-024-01161-5 · doi-reference
Utilization of electric arc furnace slag and metakaolin as precursors in alkali-activated paste: microstructure and mechanical properties
10.1007/s41062-024-01657-5 · doi-reference
Comparative durability of NaOH-activated and Na2SiO3-activated geopolymer for Pb solidification/stabilization under chemical attack
10.1016/j.envres.2026.124233 · doi-reference
Highly efficient recovery of Zn (II) from zinc-containing wastewater by tourmaline tailings geopolymers to in-situ construct nanoscale ZnS for the photodegradation of tetracycline hydrochloride
10.1016/j.envres.2024.119504 · doi-reference
Design and application of geopolymer adsorbents incorporating biomaterials and hybrid nanocomposites for high-efficiency wastewater remediation
10.1016/j.envres.2026.123878 · doi-reference
Effect of limestone on engineering properties of alkali-activated concrete: A review
10.1016/j.conbuildmat.2022.129709 · doi-reference
Formation of stratlingite, 2CaO.SiO2.Al2O3.8H2O, in relation to the hydration of high alumina cement
10.1016/0008-8846(78)90005-4 · doi-reference
On the role of alkali content on one-part alkali activated slag pastes produced with tri- blend solid activators
10.1016/j.conbuildmat.2023.133868 · doi-reference
Exploring the Potential of Nonclassical Crystallization Pathways to Advance Cementitious Materials
10.1021/acs.chemrev.3c00259 · doi-reference
Apply 29Si, 27Al MAS NMR and selective dissolution in identifying the reaction degree of alkali activated slag-fly ash composites
10.1016/j.ceramint.2017.06.108 · doi-reference
Accelerated carbonation testing of alkali-activated binders significantly underestimates service life: The role of pore solution chemistry
10.1016/j.cemconres.2012.07.002 · doi-reference
Effects of silicate modulus and alkali dosage on the performance of one-part electric furnace nickel slag-based geopolymer repair materials
10.1016/j.cscm.2023.e02224 · doi-reference
Unraveling the interactive effects of Na2O/Al2O3, SiO2/Al2O3 and calcium on the properties of geopolymers from circulating fluidized bed fly ashes
10.1016/j.cscm.2024.e03798 · doi-reference
Rheology of alkali-activated materials: A review
10.1016/j.cemconcomp.2021.104061 · doi-reference
Multiscale microstructure and micromechanical properties of alkali-activated concrete: A critical review
10.1016/j.cemconcomp.2024.105664 · doi-reference
XRD line profile analysis of calcite powders produced by high energy milling
10.1524/zksu.2008.0019 · doi-reference
Reaction kinetics of red mud-fly ash based geopolymers: Effects of curing temperature on chemical bonding, porosity, and mechanical strength
10.1016/j.cemconcomp.2018.07.008 · doi-reference
Mechanical activation of steel slag to prepare supplementary cementitious materials: A comparative research based on the particle size distribution, hydration, toxicity assessment and carbon dioxide emission
10.1016/j.jobe.2022.105200 · doi-reference