Abstract
No public abstract is available from the verified source records.
Huan Lü, Yuanqing Wang, Yecheng Dai, Mingze Wu, Shuai Mo, Yuanwen Ouyang
Abstract
Authors
Institutions
Provenance
No local reference links have been materialized yet.
No local citing links have been materialized yet.
Experimental study and finite element analysis on the local buckling behavior of aluminium alloy beams under concentrated loads
10.1016/j.tws.2016.04.003 · 2016
Optimum analysis of cast aluminum joint in aluminum alloy lattice shell structures
2009
Constitutive modeling on cyclic behaviour of AlSi12Fe cast aluminium alloy
10.1016/j.istruc.2024.108006 · 2025
A novel rheological high pressure die-casting process for preparing large thin-walled Al-Si-Fe-Mg-Sr alloy with high heat conductivity, high plasticity and medium strength
10.1016/j.msea.2020.139040 · 2020
Improvement in mechanical, thermal conductivity and corrosion performances of a new high-thermally conductive Al-Si-Fe alloy through a novel R-HPDC process
10.1016/j.jmatprotec.2019.116586 · 2020
Investigation on the effects of isothermal holding temperature and time on the coarsening mechanism and rheological properties of ADC12 Al semi-solid slurry
2024
Influence of T6 heat treatment on the microstructure and tribological properties of ADC12-GNPs composites
2023
Effect of the microstructural characteristics of die-cast ADC12 alloy controlled by Na and Cu on the mechanical properties of the alloy
2022
crossref
Confidence 100%
openalex
Confidence 95%
datacite
Confidence 0%
Precise analysis of effects of aging on mechanical properties of cast ADC12 aluminum alloy
10.1016/j.msea.2015.04.072 · 2015
Experimental cyclic behaviour and constitutive modeling of ADC12 cast aluminium alloy
10.1016/j.istruc.2025.108872 · 2025
Fatigue tests on edge cracked four-point bend steel specimens repaired by CFRP
10.1016/j.compstruct.2019.03.055 · 2019
Numerical analysis of central mixed-mode cracking in steel plates repaired with CFRP materials
10.1016/j.tws.2019.106196 · 2019
On fracture locus in the equivalent strain and stress triaxiality space
10.1016/j.ijmecsci.2004.02.006 · 2004
Constitutive modeling of void shearing effect in ductile fracture of porous materials
10.1016/j.engfracmech.2007.07.022 · 2008
Ductile damage model calibration for high-strength structural steels
10.1016/j.conbuildmat.2020.120632 · 2020
Experimental and numerical investigation of ductile fracture for AA6061-T6 sheets at room and elevated temperatures
10.1016/j.ijmecsci.2022.107201 · 2022
Strain-rate and stress-state dependent ductile fracture model of S690 high-strength steel
10.1016/j.jcsr.2023.107852 · 2023
Verification of void growth-based exponential damage function for ductile crack initiation over the full range of stress triaxialities
10.1016/j.engfracmech.2022.108571 · 2022
Strain rate dependent ductile fracture behavior of Q960 ultra-high-strength steel
10.1016/j.ijmecsci.2025.110183 · 2025
Continuum theory of ductile rupture by void nucleation and growth: part I - yield criteria and flow rules for porous ductile media
10.1115/1.3443401 · 1977
An analysis of ductile rupture in notched bars
10.1016/0022-5096(84)90031-0 · 1984
Continuum damage mechanics: part I - general concepts
10.1115/1.3173661 · 1988
A continuous damage mechanics model for ductile fracture
10.1115/1.3225775 · 1985
Ductile fracture of WAAM steel: experiments, simulations and model calibration
10.1016/j.ijmecsci.2025.110684 · 2025
The relationship between constraint and ductile fracture initiation as defined by micromechanical analyses
1995
On the mechanics of ductile failure in high-strength steel subjected to multi-axial stress-states
10.1016/0022-5096(76)90024-7 · 1976
The void growth model and the stress modified critical strain model to predict ductile fracture in structural steels
10.1061/(asce)0733-9445(2006)132:12(1907) · 2006
Toughness parameters calibration of Chinese structural aluminum alloys
2020
Damage predictions for the 2024-T351 aluminium alloy under both monotonic and cyclic loadings
2024
Prediction of ductile fracture for metal alloys using a shear modified void growth model
10.1016/j.engfracmech.2017.12.042 · 2018
Application of extended Mohr-Coulomb criterion to ductile fracture
10.1007/s10704-009-9422-8 · 2010
Experimental and numerical investigation of ductile fracture for AA6061-T6 sheets at room and elevated temperatures
10.1016/j.ijmecsci.2022.107201 · 2022
Ductile fracture prediction of AA6061-T6 in roll forming process
10.1016/j.mechmat.2020.103498 · 2020
A finite element ductile failure simulation method using stress-modified fracture strain model
10.1016/j.engfracmech.2010.10.004 · 2011
On the ductile enlargement of voids in triaxial stress fields
10.1016/0022-5096(69)90033-7 · 1969
Material parameters in void growth model for G20Mn5QT cast steel: calibration and verification
10.1061/(asce)mt.1943-5533.0003065 · 2020
Material parameters in void growth model for G20Mn5QT cast steel at low temperatures
10.1016/j.conbuildmat.2020.118123 · 2020
Material parameters in void growth model for G20Mn5QT cast steel at low temperatures
10.1016/j.conbuildmat.2020.118123 · doi-reference
Material parameters in void growth model for G20Mn5QT cast steel: calibration and verification
10.1061/(asce)mt.1943-5533.0003065 · doi-reference
On the ductile enlargement of voids in triaxial stress fields
10.1016/0022-5096(69)90033-7 · doi-reference
A finite element ductile failure simulation method using stress-modified fracture strain model
10.1016/j.engfracmech.2010.10.004 · doi-reference
Ductile fracture prediction of AA6061-T6 in roll forming process
10.1016/j.mechmat.2020.103498 · doi-reference
Application of extended Mohr-Coulomb criterion to ductile fracture
10.1007/s10704-009-9422-8 · doi-reference
Prediction of ductile fracture for metal alloys using a shear modified void growth model
10.1016/j.engfracmech.2017.12.042 · doi-reference
The void growth model and the stress modified critical strain model to predict ductile fracture in structural steels
10.1061/(asce)0733-9445(2006)132:12(1907) · doi-reference
On the mechanics of ductile failure in high-strength steel subjected to multi-axial stress-states
10.1016/0022-5096(76)90024-7 · doi-reference
Ductile fracture of WAAM steel: experiments, simulations and model calibration
10.1016/j.ijmecsci.2025.110684 · doi-reference
A continuous damage mechanics model for ductile fracture
10.1115/1.3225775 · doi-reference
Continuum damage mechanics: part I - general concepts
10.1115/1.3173661 · doi-reference
An analysis of ductile rupture in notched bars
10.1016/0022-5096(84)90031-0 · doi-reference
Continuum theory of ductile rupture by void nucleation and growth: part I - yield criteria and flow rules for porous ductile media
10.1115/1.3443401 · doi-reference
Strain rate dependent ductile fracture behavior of Q960 ultra-high-strength steel
10.1016/j.ijmecsci.2025.110183 · doi-reference
Verification of void growth-based exponential damage function for ductile crack initiation over the full range of stress triaxialities
10.1016/j.engfracmech.2022.108571 · doi-reference
Strain-rate and stress-state dependent ductile fracture model of S690 high-strength steel
10.1016/j.jcsr.2023.107852 · doi-reference
Experimental and numerical investigation of ductile fracture for AA6061-T6 sheets at room and elevated temperatures
10.1016/j.ijmecsci.2022.107201 · doi-reference
Ductile damage model calibration for high-strength structural steels
10.1016/j.conbuildmat.2020.120632 · doi-reference
Constitutive modeling of void shearing effect in ductile fracture of porous materials
10.1016/j.engfracmech.2007.07.022 · doi-reference
On fracture locus in the equivalent strain and stress triaxiality space
10.1016/j.ijmecsci.2004.02.006 · doi-reference
Numerical analysis of central mixed-mode cracking in steel plates repaired with CFRP materials
10.1016/j.tws.2019.106196 · doi-reference
Fatigue tests on edge cracked four-point bend steel specimens repaired by CFRP
10.1016/j.compstruct.2019.03.055 · doi-reference
Experimental cyclic behaviour and constitutive modeling of ADC12 cast aluminium alloy
10.1016/j.istruc.2025.108872 · doi-reference
Precise analysis of effects of aging on mechanical properties of cast ADC12 aluminum alloy
10.1016/j.msea.2015.04.072 · doi-reference
Improvement in mechanical, thermal conductivity and corrosion performances of a new high-thermally conductive Al-Si-Fe alloy through a novel R-HPDC process
10.1016/j.jmatprotec.2019.116586 · doi-reference
A novel rheological high pressure die-casting process for preparing large thin-walled Al-Si-Fe-Mg-Sr alloy with high heat conductivity, high plasticity and medium strength
10.1016/j.msea.2020.139040 · doi-reference
Constitutive modeling on cyclic behaviour of AlSi12Fe cast aluminium alloy
10.1016/j.istruc.2024.108006 · doi-reference
Experimental study and finite element analysis on the local buckling behavior of aluminium alloy beams under concentrated loads
10.1016/j.tws.2016.04.003 · doi-reference