Abstract
No public abstract is available from the verified source records.
Open public full textRights: UNKNOWN · https://www.elsevier.com/tdm/userlicense/1.0/ · Source: journal-auto-sync:external:CROSSREF_ISSN
Contact and support
Need help, have a question, or want to contact the ResearchHub team?
© 2026 ResearchHub. Built for responsible scholarly connection.
Privacy-aware community infrastructureIrene Fassi, Gloria J. Wiens
Abstract
Rights: UNKNOWN · https://www.elsevier.com/tdm/userlicense/1.0/ · Source: journal-auto-sync:external:CROSSREF_ISSN
Authors
Institutions
No ROR-resolved institution is linked to this work yet.
Provenance
crossref
Confidence 100%
unpaywall
Confidence 95%
datacite
Confidence 0%
No local citing links have been materialized yet.
The NISTROBOCRANE
10.1002/rob.4620100509 · 1993
The Mechanical Design of Redundant Manipulators
1997
Unresolved referenced work
Kept as external metadata until matched
Unresolved referenced work
Kept as external metadata until matched
On the Optimum Design of Stewart Platform Type Parallel Manipulators
10.1017/s026357470001763x · 1995
A Geometric Modeling and Five-Axis Machining Algonthm for Centrifugal Impellers
1997
Determination of Modal Deformations by Means of In Situ Accelerations
10.1115/1.3269300 · 1986
Stiffness Modeling of a Stewart-Platform-Based Milling Machine
1997
A New 3T-1R Parallel Robot
1999
Model Reference Adaptive Control of Feed Force in Turning
10.1115/1.3143770 · 1986
A Canonical Formulation of the Direct Position Kinematics Problem for a General 6-6 Stewart Platform
10.1016/0094-114x(94)90081-7 · 1994
The Stewart Platform Manipulator: A Review
10.1016/s0094-114x(99)00006-3 · 2000
The Delta Robot Within the Industry
1999
A Translational 3 dof Parallel Manipulator
1998
Active Chatter Control in a Milling Machine
1997
Unresolved referenced work
1997
Computation of Stiffness and Stiffness Bounds for Parallel Link Manipulators
10.1016/s0890-6955(98)00039-x · 1999
A Concept for a Computer Aided Configuration Tool for Parallel Kinematic Machines
1999
Combinatorial Classes of Parallel Manipulators
10.1016/0094-114x(94)00069-w · 1995
A Stewart Platform-Based Manipulator: General Theory and Practical Construction
10.1177/027836498600500216 · 1986
On the Dynamic Model and Kinematic Analysis of a Class of Stewart Platforms
10.1016/0921-8890(92)90041-v · 1992
Stiffness Mapping for Parallel Manipulator
10.1109/70.56657 · 1990
Singularity Analysis of Closed Loop Kinematic Chains
10.1115/1.2912612 · 1990
A Comparison ofArchitectures of Parallel Mechanisms for Workspace and Kinematic Properties
1995
Universal Tire Test Machine
1962
Modal Analysis and Modeling of a Parallel Kinematic Machine
1999
Hexaglide 6 DOF and Triaglide 3 DOF Parallel Manipulators
1999
Multiaxis Technology: Challenges to Overcome
1999
The Local Dexterity, Optimal Architecture and Design Criteria of Parallel Machine Tools
1998
An Algorithm for Solving the Direct Kinematic of Stewart-Gough Platforms
10.1016/0094-114x(95)00091-c · 1996
Forward Kinematics of the General 6-6 Fully Parallel Mechanism: An Exhaustive Numerical Approach via a Mono-Dimensional-Search Algorithm
1992
Exhaustive Enumeration of Fully Parallel Kinematic Chains
1994
10.1115/detc98/mech-5894
10.1115/detc98/mech-5894
Intelligent Control of Machining Under Modeling Uncertainly
1995
Cycle-Time Reduction in Machining by Recursive Constraint Bounding
1997
Will PKM Be Adopted by Industry?
1999
Analysis of Design Parameters in Platform Manipulators
10.1115/1.2826923 · 1996
Design, Reconfiguration and Control of Parallel Kinematic Machines
1999
Performance Analysis of Parallel Manipulator Architectures for CNC Machining
1997
Unresolved referenced work
1983
Method for Kinematic Calibration of Stewart Platforms
10.1002/rob.4620100306 · doi-reference
A Formalism for the Analysis and Design of Modular Kinematic Structures
10.1177/027836499801700703 · doi-reference
An Implicit Loop Method for Kinematic Calibration and Its Application to Closed-Chain Mechanisms
10.1109/70.466613 · doi-reference
Series-Parallel Dualities in Actively Coordinated Mechanisms
10.1177/027836499101000503 · doi-reference
10.4271/1999-01-2277
10.4271/1999-01-2277 · doi-reference
Modeling and Conventional/Adaptive PI Control of a Lathe Cutting Process
10.1115/1.3152695 · doi-reference
Fundamental Comparison of the Use of Serial and Parallel Kinematics for Machines Tools
10.1016/s0007-8506(07)63200-4 · doi-reference
Evaluation of Cutting Performance of Machining Centers
10.1016/s0007-8506(07)62017-4 · doi-reference
Putting Parallel Kinematics Machines (PKM) to Productive Work
10.1016/s0007-8506(07)63199-0 · doi-reference
Nonlinear Dynamics and Stability of a Machine Tool Traveling Joint
10.1023/a:1008282531457 · doi-reference
A Finite Element Approach to the Design and Dynamic Analysis of Platform Type Robot Manipulators
10.1016/0168-874x(92)90020-d · doi-reference
Systematic Design of Hexapods and Other Parallel Link Systems
10.1016/s0007-8506(07)60828-2 · doi-reference
DELTA: A Simple and Efficient Parallel Robot
10.1017/s0263574700007669 · doi-reference
Volumetric Error Analysis of a Stewart Platform Based Machine Tool
10.1016/s0007-8506(07)60827-0 · doi-reference
Determination of the Actual Configuration of the General Stewart Platform Using Only One Additional Sensor
10.1115/1.2829423 · doi-reference
Direct Kinematic Solution of a Stewart Platform
10.1109/70.59354 · doi-reference
Mechanism of Cutting Force and Surface Generation in Dynamic Milling
10.1115/1.2899673 · doi-reference
Determination of the Orientation Workspace of Parallel Manipulators
10.1007/bf01254849 · doi-reference
Stabihty Analysis of a Constant Force Adaptive Control System for Turning
10.1115/1.3186001 · doi-reference
The Singularities and Dynamics of a Stewart Platform Manipulator
10.1007/bf01257946 · doi-reference
A Practical Quality Index Based on the Octahedral Manipulator
10.1177/027836499801701005 · doi-reference
A Dynamic Model of a Flexible Stewart Platform
10.1016/0045-7949(93)90313-3 · doi-reference
Dynamic Analysis and Control of a Stewart Platform Manipulator
10.1002/rob.4620100506 · doi-reference
10.1117/12.239145
10.1117/12.239145 · doi-reference
Dynamic Modeling for Control of the Milling Process
10.1115/1.3187896 · doi-reference